Top tip #8.....incubator setup 😁

[@frankiebyers2176]

I am in the states, your videos are more information than the ones in the state, I love your videos keep up the great work

[@Balls2U]

Byers Corp thank you and Merry Christmas

[@Ibaneddie76]

Awesome video Gavin you do a lot to help new people in the hobby thank you.

[@beanie8368]

Great video mate, your channel has become one of my go to places for good info. Thanks for making em.

[@boxingboa]

Love this video. So much great info. That's one thing about your videos I always seem to learn new things.👍🐍👊🏼

[@Balls2U]

thanks bro, leaning new stuff is what it's about. I love to lean. thanks for watching 👍

[@SansaStarkofWinterfell]

Unusual that the top is cooler than the bottom its usually the other way round, But that's better than hotter at the top. Nicely done Gav, excellent incubator! =D I've even seen where guys build their incubator has two fans on the bottom, one blowing up, one sucking air down. And up top, they got two fans there too, with the fans on the opposite positions from above and on the other side. So that they get maximum air circulation. They used the fans like what would go into PC's & such. Fascinating to see how things are used for different purposes. ~Tina

[@Balls2U]

there will always be a slight difference in temp top to bottom, front to back, as long as its with in a degree of each other they should all work the same way.

[@BenWebsterr]

Great video mate! I use the same egg boxes I find they are amazing for keeping humidity in!

[@Balls2U]

thanks Ben, I agree great boxes 👍😁

[@sethzelenik1605]

I hope you didn't already answer this but do you use shelves or do you just stack the boxes on top of one another. Thank you for all the great videos. Has made a big difference for me as I'm just getting started with my program.

[@Balls2U]

Seth Zelenik I just stack them on top of each other

[@bobj8063]

Details, details details... Nicely thought out.. 👍

[@ada2444]

hi where is your fan situated and did you install it yourself? also do the fan need to be suspended from the top of the fridge? thanx

[@theserpentchamber282]

Great video bro! Very nice looking incubator, I'm about to build one myself.

[@Balls2U]

thanks bro.....I didn't find it to hard and it works like a dream 👍😁

[@willettej100]

Very nice

[@bvelasco7721]

hey there Gav, just curios about the length of the heat cable.... thanks and happy breeding and a great day

[@Balls2U]

Bong Velasco good question..... I'm sure it's 5 meters. thank you 😊🙏

[@Primo420]

Hey gav, as always great video. would be great if you could make a few videos of your collection, set up ect. 👍

[@Primo420]

meaning how you build your racks😂

[@Balls2U]

I'll be doing a video soon on some rack and stuff, so stay tuned 👍😁

[@Primo420]

+Balls2U Thanks mate look forward to it👍

[@michaelscreativecreations]

Very nice!!

[@KNM-CONSTRICTORS]

Gavin I have asked in some of your other videos do you need the fan in the incubator also do I have to have my thermostat hooked up to my incubator it's my first clutch and I'm going to have to use a chicken incubator very small

[@Balls2U]

I find a fan works best but other breeders don't use them

[@KNM-CONSTRICTORS]

@@Balls2U okay man thanks so much I would love to try to put me a little fan in it I just got to find a very little fan how to run it and where to put it inside the incubator thanks so much for the reply also I may have some more questions if you could find me on Facebook it's a k and a c Virginia again Kc Virginia thanks so much man you're awesome

[@ChubSsw9]

What's the difference between a pulse stat / dimming stat / mat stat etc ??

[@naturelive7445]

Great video!! This is the perfect incubator xD, which way you use the water bottles to increase the wet?

[@sketchysniping9661]

What wattage is the heat cable ?

[@tannerdude8870]

Cool

[@acsballpythons1607]

is there a fan in there?

[@shaunstrohl8493]

tried to look up prices for that thermostat. but i guess i cant get them in the US

[@joshlowe4377]

look on amazon

[@TheTotalCatfish]

Slightly off topic I know, but where are you based?

[@Balls2U]

I'm not far from Birmingham in the UK.

[@TheTotalCatfish]

+Balls2U ok that's excellent being originally from dudley my self. I have a statement I'd like to make and a question or a request to follow if you will. ok so to start with I've been around snakes of various sizes all my life, my uncle had 4 Burmese pythons which he did breed on a few occasions, 2 royals and a red tailed boa. Now after many years of thinking, going back and forth I've decided I want to keep royals my self and maybe dabble into the world of breeding somewhere down the line. Now onto my question, could you possibly do a video on how you would start the hobby if you were to start fresh today. Maybe go through different budgets I.e £1000, £3000 so on and what snakes and the quantity you would get as I would like some friendly advice and pointers. Thanks Nath

[@Balls2U]

+FudgeyWudge hi, yeah no problem, I'll do one very soon. 👍

[@reptilerob9650]

Im just brought the prime 2 an still got a lot of playing around with it cus its not the easiest one to setup ,also I can't seem to download the software to my laptop to make things easier 🤔

[@Balls2U]

REPTILE ROB there are easier stats which work just as well mate

[@reptilerob9650]

I know brv the micro climate digital is my favourite but up the time it wasn't in stock at my local (Northampton Reptile centre) so I brought the prime 2 ,im just got to play about with it to get use to it .

[@Sor1ner]

Awesome video sir, I just built a small one from a wine cooler. I'll make a video of it when I can, maybe u can check it out when u can and tell me what u think?

[@Balls2U]

OK great I'll look out for it. 👍

[@TreyBeckGA]

nice!

[@Balls2U]

thanks 👍

[@BryceBroom]

Very nice