INDIVIDUAL TRACK LINKS HOW I DO THEM

[@theTutenstien]

I started armor building recently (did mainly aircraft) and I avoided whatevery kit that had individual links. This actually doesnt look that bad thank you

[@BlaBla-su2yh]

I just got back to the hobby for the first time since I was a kid, and after finishing my first tank I really wondered what to do with it instead of playing with it like back in the day. I really like that shelf on the right, I think I will steal that idea. Thank you

[@qinsan1282]

I got myself this T-80BV from trumpeter that has workable tracks and this was my first time. Always wondered how people managed them… Thank you! It was really good advice!!!

[@jjab99]

Perfect timing John, I am doing a Buddy Build of a T-55 with Greg Reilly and Steve Mottram. I am just getting to the bit where I need to assemble the tracks and they are the individual links, which I have never done before, so your video could not have arrived at a better time. Many thanks for this help, it will save a lot of problems and a lot of swearing too!! I love these videos, they are so helpful and useful to so many many people. Keep up the great work John and many thanks once again for sharing your skills and knowledge with us on here. Have fun my friend, Joe

[@johnmooresscalemodels5176]

Thank you :-) J

[@Duell-850R]

You are a life saver. I was working on my Meng Jagdpanther. And got so frustrated by these links. Your methode is easy and it works like a charm. Thank you. And greetings form holland.

[@randomteapot950]

Thank you so much for this video! This was super helpful, I’m very new to to the world of model kits but am very excited to get into them. I got my first kit three years ago but after starting it stopped the second I saw the tracks being individual links because I had no bloody idea what I was supposed to do. Found myself recently really wanting to get back into it and give my poor half built Hetzer some love. This video has been extremely helpful and has actually made it look like quite a bit of fun. I can’t wait to get stuck into it after I acquire some of that slow drying glue and finally complete my first model :D

[@106timo]

The first and the best video about how to assemble the tracks. Normally, people don't let see how they assemble the tracks

[@106timo]

Superrrrr thanks 😊

[@oceanman3804]

Thanks John! I was wondering how I was going to do my next kit. Now I know, thanks!

[@c.9900]

Great video. Love the down to earth narration.

[@polheg1]

Hi John. Soooo glad I came across this video of yours. Did modelling when I was in my teens, now two weeks shy of my 60th, back to it. One kit I'm working on is the Hobbyboss Panzer 38t. First time I've EVER come across individual links. Me: 😱😱😱. After watching your video: 😁😁😁. Thank you from another mad Irishman. (Madder than you, because I live in England now).

[@johnzaranek7839]

Brilliant instructions, John...many thanks!

[@jankoso3958]

Thank you very much for this video. The directions for the tank I am building are, at best, useless. I found your system easy to implement and follow.

[@duckman5642]

Great tips and advice, greatest banter, cheers John.

[@johnmooresscalemodels5176]

Thank you :-) J

[@richielamb2733]

Great tips John, I had no end of problems doing the tracks on aMeng T90 ...nearly reached for a hammer to smash the hell out of them. I enjoy your videos ,they make me laugh with your banter 👍

[@johnmooresscalemodels5176]

Thank you :-) J

[@wolfy2931]

Thanks mate your really helped me out im building my first tank!

[@larrybrown1824]

Perfect timing on this John. I have two kits coming up with individual tracks for a dio. Never done ind tracks before.

[@johnmooresscalemodels5176]

Thank you :-) J

[@GregReilly135ScaleModels]

Thank you John for showing us your method on doing the tracks like the idea with the masking tape i will use that the next time i do my tracks

[@johnmooresscalemodels5176]

Thank you :-) J

[@daniell6353]

Thankyou for the machine gun idea...knew I had been keeping them off used bottles for a reason

[@johnmooresscalemodels5176]

Thank you :-) J

[@greatrosco8661]

Shazaaaam. You make it look easy! Got my first set of links and didn't have a clue about how to put them together. Super video, thank you very much for the lesson.

[@trevoratchison3904]

I use 2 pieces of L shaped aluminium back to back drill holes in each end and small bolts with a firm spring. Slide tracks in and u can pin them or glue them. Love your work and commentary keep up good work

[@changoperfetto5852]

Thank you! My first tank and was a bit intimidating when it came to the tracks.

[@davehackett7653]

Great method John, I'll give that a go thanks.

[@stevenbrown8857]

Great timing on the video John. I've got my first set of indy links to build. I've done link n length before but never the full run. Masking tape and a metal ruler it is ... cheers :)

[@johnmooresscalemodels5176]

Thank you :-) J

[@tomatoes3]

Great video, love the humer and will copy your method 👍

[@bucknertarsney7674]

Holy Feck!!!! Great video John.

[@johnmooresscalemodels5176]

Thank you :-) J

[@trevorbullman6837]

Thanks John, I have just finished my first tank track, what a mess, my second track should now be better having watched your video, luv the odd feck! 😀

[@quannguyenthanh8868]

Thanks for the video.

[@Tiglicka666]

very smart and helpful!! thanks!

[@simonkemp.models4742]

Nice one John keep doing what you doing sim

[@johnmooresscalemodels5176]

Thank you :-) J

[@bpezzano1]

Awesome tip! Thank you very much! :-)

[@johnmooresscalemodels5176]

Thank you :-) J

[@thomasholmes3148]

Enjoyed the video very informative

[@johnmooresscalemodels5176]

Thank you :-) J

[@TheRealModelholic]

Thx for the tutorial. I will try it exactly on my next project.

[@johnmooresscalemodels5176]

Thank you :-) J

[@kushmannyc1495]

Nice job John!!!!!

[@johnmooresscalemodels5176]

Thank you :-) J

[@luismartinithiesen5292]

...thank you, sir! Very handy!...

[@jonathanmelgaard6445]

Thanks John. Started the Takon King Tiger about to do the tracks.

[@johnmooresscalemodels5176]

Thank you :-) J

[@bpezzano1]

I just finished the tracts for two King Tigers. Just take your time, my friend. :-)

[@kuntibolox]

Good video but I'd personally leave the tape on until I fit the track then remove it just to add a little more strength whilst it dries

[@wonsworld61]

brilliant thank you

[@MrPolicekarim]

Great video but a slight problem! I have an Airfix= ex-Academy= 1/35 panther g. The track are like a cross between plastic and rubber! Will this work please?!

[@kevinchapman4362]

Ok John TKS ill b trying it soon would painted plastic mess it up ! ? Anyway last night I checked out ( GD models ). And he was doing a full build tiger tank ! In parts ! Like. 18 ! Unreal the amount of detail he put into it ! But I didn't really like the camo color ! But all in all very nice ! Hats off to him . I think it took him like 6 months to build it ! Or so

[@johnmooresscalemodels5176]

Thank you :-) J

[@hex1c]

And how do you paint the tracks? Now they're on the model?

[@kevinchapman4362]

Hey John how about using Tamiya brush glue the normal stuff ! ? Never done armor before but Christmas is around the corner ! ? Looking to tackle a Tiger or a Panther maybe both ! ? Lol

[@johnmooresscalemodels5176]

The Tamiya White cap is a bit too thick :-) J

[@NiceRice74]

2:37 haha says it all 👍

[@mikebelforti]

Good tutorial, some editing would quicken the video

[@kevinegan6876]

thanks john

[@johnmooresscalemodels5176]

Thank you :-) J

[@hgbarnes1584]

I think the Mad Irishman has "slipped a track"! Never heard so much fucking swearing in my fucking life... tabornacke. LOL Thanks John.

[@johnmooresscalemodels5176]

Thank you :-) J

[@bezweifeln3959]

Did you attempt to join the first and last links? I didn't get the ending with just the tape. Tamiya's Extra Thin seems pretty slow to set. Have you used this product before? I appreciate your video as I was flummoxed by the individual inks and was avoiding vehicles which had them! Thank you.

[@johnmooresscalemodels5176]

I use revell contacta to do the links and use tape to hold when joining the last two untill the glue cures

[@rkbush27]

Great video John! Anything helps. Tracks have to be the most tedious thing ever (except for the dentist chair. ) Unfortunately the Revell glue isn't available in the States. Any suggestions on what to use? Thanks!

[@ennisanderson2719]

Bob Bush I think the Testors glue in the same type of dispencor . I use Testors liquid, myself but I'm thinking about trying some just to see how it is.

[@johnmooresscalemodels5176]

Testors Thank you :-) J

[@fubarmodelyard1392]

Bob Bush I use the testors in the black bottle 3507. It's a slow set liquid glue

[@thesmanbrowne4561]

Great vid . But I’d rather eat raw onions than go through this Hell

[@barrechor4345]

The sprues on my FV215b (183) track links keep breaking off and making the tracks flimsy, what should i do?

[@johnmooresscalemodels5176]

To be honest I don't know. All I can think of is to try make them into link and length just tamiya extra thin and just make them in sections.

[@AFV85]

I'm doing them for my jagdpanther 2 just started 4 nloody sprues and 3 peice tracks! That single link is just pointless haha

[@kevinchapman4362]

Hey John TKS u but I have the orange cap glue and brush

[@johnmooresscalemodels5176]

Oh Don't know that one, as long as it is not a quick drying one and fairly thin it should work :-) J

[@kenjohnston8173]

Too bad ur not showing workable tracks using pins, quite diff and more difficult

[@ianjames8794]

What's the thumbs down for?

[@valter14725]

its mm not cm :D

[@downhillfan8331]

Sorry,but your Cam is not good and the Picture-Quality: help!

[@walterwilmoth8390]

Lol I understood just fine. I'm just happy people take the time to share doesn't need 4k camera for this type stuff

[@downhillfan8331]

@@walterwilmoth8390 then is it the autofocus!Your picture quality is shit,sorry!

[@markrogier]

So annoying you constantly saying “OK”, and or “all right”…..🤮