induction brazing

[@eleziobraga2737]

Que bom temos nos dias de hoje a mídia para nós ver como é feito as ferramentas, na minha infância eu não tive essas oportunidades que hoje tem. Tem tudo para aprender e não te interesse no aprendizado... Pois não querem trabalhar e viver alheio... Bom trabalho meu Amigo obrigado por ter voces de qualidades para instruir , está de parabéns...

[@gergelydobai1588]

Muito obrigado pela boa opinião!

[@hannanpakthini7221]

Brazing of Carbide tip to the Lathe tool. Thanks for demo. Superb.

[@gergelydobai1588]

Thank you for your positive review!

[@radiofun232]

Super interesting video. I have never seen how that was done!

[@gergelydobai1588]

THANKS!

[@simonkovac9798]

89

[@autosarria4347]

Thanks bro.

[@tjvanderloop1686]

Excellent Induction Welding Video. Ideal Brazing application of carbide to an alloyed steel tool holder. A BIG THANKS! T J (Tom) Vanderloop, Author, Technology Instructor, AWS & LSME; A Certified Manufacturing Engineer

[@gergelydobai1588]

Dear Sir! Thank you for your positive evaluation, and I recommend to your attention our other technological videos and equipment, which we have also designed for interesting production technology tasks.Our automatic heat treatment equipment, which implements heat treatment without programming, may be interesting! You can find more of our videos by searching for "DG Elektrotech Kft"!Sincerely, Thanks: Gergely Dobai

[@Newtrickz-l5y]

بصراحة عمل رائع ياصديقى وسريع كنت من قبل نلحمها بالاكسجين

[@raghupathyvp7105]

This is the first time I saw such brazing.thanks to your Chanel promoters.👌👍😊

[@SkypowerwithKarl]

Wouldn’t have hurt to blast the soot and scale off the holder before. Probably would have needed a lot less heat to get the metal to flow around the joint and less thermal damage to the carbide.

[@eatonasher3398]

I was going to say... Jesus, no wonder the carbide is shite on cheap tools, they heat it up enough to rearrange the structure

[@deathness13]

Agreed thats like over doing it ... a small torch would have done a better job on heating small piece of carbide and shim would have melt better all around ....everyone wonder wats that power?? When flux dries out .u can easily break it down into powder I think that’s wat it is,so when shim melts it can flow better around carbide..

[@chuckmccown5811]

We do this on a daily basis. We use a brass probe to tap the insert once it floats. We have the time set to heat the minimum amount. We never get it this hot and never twice. I'll bet they are hitting 1700C

[@SkypowerwithKarl]

@@WinkenBlinkenAndNod Yup, paying for it big time. For me, the tool letting good is the least of consequences. Damage to the part would be apically expensive. And time to replace material is unacceptable . Doom!

[@pabloiervolino2265]

Exelente trabajo ,muy limpio y rápido!! Un saludo desde Argentina 🇦🇷

[@gergelydobai1588]

Köszönöm a pozitív visszajelzést! Üdvözlöm Önt Magyarországról!

[@мыбезумныХристаради...1Коринфя]

​@@gergelydobai1588 А как же теперь эта плита режущая она ослабла от перегрева?

[@АлександрЧерноусов-д3з]

Восторг да и только! Особенно если много резцов...

[@РусланЛеурдо]

Да а мы керосиновым резаком Греем мучаемся ,получается но очень медленно.

[@АлександрЧерноусов-д3з]

@@РусланЛеурдо это просто изготовить, при желании..

[@РусланЛеурдо]

@@АлександрЧерноусов-д3з да у меня есть трансформатор Точечной сварки ,его можно использовать , летом попробую.

[@inventor1978]

Thank you sharing but i want do it ?

[@Sandi-n8x]

Sir, I really thank you very much for this video and I was really helped by this video and I am very grateful

[@miguelrivera2751]

Según tengo entendido que este tipo de soldadura es la de sandwich ahora la unión es plata cuál es el aglutinante para la unión agradeceré la información técnica saludos de el camp.2de octubre Iztacalco cd de México

[@rattywoof5259]

OMG how many amps is that?!

[@epicnavigator]

Yes

[@GoldenTiger01]

Over 9000

[@aryanrana4684]

May be 2000~5000

[@СергейГлушков-г4д]

100% перегрев твёрдосплава! Нагрейте заготовку до малиного цвета, а потом всё остальное кладите,предварительно зачистив поверхность под пайку у твёрдосплава.

[@ЯрославНовак-ь3х]

Сам резаком такие паял минута один, ничего сложного

[@jf1206]

Hola, muy buen video. Super interesante. Que polvos y aportación emplea en la soldadura?, Gracias un saludo.

[@KayvanCrafted]

Anyone has any idea how many watt is this induction? I'm doing research to run something similar to this, but I have no Idea about it; any advise is also highly appreciated.

[@arthurbom6816]

Испортили напаику 2 раза грели будет колоться

[@99shujah]

what type of powder you used for inset and steel bonding. please help any body.

[@gergelydobai1588]

Kedves Ahmad! A por amit használtam: síma borax

[@kosmoscol]

Пластину перегрел.

[@gergelydobai1588]

Конечный результат все еще хорош!

[@Zloy_npanop]

@@gergelydobai1588 конечный результат - перегретая пластина!!! :)

[@РустНазаров]

Пластина не перегрелась, т.к припой не выгорал, а выгорать он начинает при 1200 градусах, страшнее такой быстрый нагрев, и фактически моментальное охлаждение хвостовиком державки, будет напряжение серьезное, пластина крашится при заточке, работе будет.

[@cellman64]

what is the putted dust on ıron nail?

[@juliocabrera733]

Tengo una gran duda con que lo pegas bronce? U otro material

[@gergelydobai1588]

Egyszerű vörösréz lemezt használunk, és ahhoz egy kis bóraxot!

[@abdullahafridi3623]

Is this very costly for electricity... my mean is it consume so much power pls let me know?

[@rollbot]

it 'looks advanced' -- but anyone could just hold this by hand. how many of these have you sold?

[@onlooker251]

I’ve wondered how they braze these carbide tip on...👍

[@danielzunigagutierrez6300]

A torch can do the job but this should be a more practical novelty.

[@hermantolam1599]

Why the carbide tip,must be heated so high(aproximate 1100°C)? Because the plate for brazing will be melt at about 700°C...

[@Zonkotron]

@@hermantolam1599 Yeah....according to the things i know about brazing and carbide....this demo was shite....brazing tends to work best if you gte the heat *just* right. Yellow hot is not mentioned anywhere in that sentence....

[@woutmoerman711]

Is this replacement of a worn tip? The tool looks used.

[@mirceaschwartz1788]

Hello, can you please tell me what materials you used for brazing? What powder and what solder alloy?

[@mattdpainter531]

So cool, induction heater is def my next purchase. Also, how big is the tool holder for that lathe, jeebus that’s a big fuggin cutter

[@johnwurst6691]

What a cool idea! Well done!

[@gergelydobai1588]

Thank you very much

[@jonathangarzon2798]

@@gergelydobai1588 what's the music? Fucking awesome

[@josecfish5297]

This looks like a perfect way to add more metal to a worn out crankshaft journal

[@Степан_механіка]

Who know name this song?

[@juanavendano2264]

Cuanta energía gasta este calentador de inducción

[@gergelydobai1588]

20-30KW

[@agushartanto4764]

Well done...nice work...salute from indonesia

[@robsonwaynneantonio9472]

Congratulations ... very good I liked ... Friend what is the applied power? and what is the work voltage?..thanks

[@wagnergomes3171]

O

[@realblakrawb]

Nice try harbor freight factory informant.

[@5762dg]

Takes me back to when I was a manufacturing jeweller and using an electro magnetic induction casting machine similar to this to melt the gold

[@maxgroo2626]

Wait... Gold isn't magnetic. How did you melt it?

[@5762dg]

@@maxgroo2626 The induction of an electromotive force by the motion of a conductor across a magnetic field or by a change in magnetic flux in a magnetic field is called ‘Electromagnetic Induction’.

[@bhuneshwarkumar3039]

I want that set-up please help me

[@tonycstech]

My ears were shot. Cant head anything after watching this video.

[@aan5393]

What it is the Amp and W please

[@leksandranatolevich7497]

Установка ТВЧ,ток высокой частоты! Очень вреден для мужчин, поэтому на них работали только женщины. Сам работал на заводе СИиТО в Ростове. Эта установка так же используется для закалки поверхности шестерён и других детей машин,для гибки металлических предметов.

[@простойпарень-ш7п]

Расскажите чем он вреден?

[@ВікторСкрипник-ы8й]

И я работал на ТВЧ.наплавлял лемехи для плугов и диски копачей для КС-6 порошком сормайта.напайки для резцов .... И мне уже 55.но не жалуюсь пока.

[@olegdashkovskyi5759]

Щупальцы не мешают?)

[@mustafaYkhan]

Hello Please someone tell me doesn't this much heat destroy the carbide and change its grain structure and also the hardness .

[@fadhilz963]

No carbide material is retain its hardness when it cools down.. That isthe reason used more than carbon steel and high speed steel.. Don't worry.. This induction inverter heater coil will help whole solid binding with coherent material

[@kaluvanhariharan4256]

Excellent, may i know what is that powder applied during welding...

[@remcovanvliet3018]

Flux. Probably borax.

[@kaluvanhariharan4256]

@@remcovanvliet3018 Thanks a lot Remco..

[@dens3254]

carbide cutting steel sticked with braze?? and what is that pulver?

[@eddiekulp1241]

Its heated to hot , did carbide soldering for years

[@ur3qdi299]

мегатехнология ! у наших проше !!! просто кирпич !!! но спичкой двигать ...это не вписывается в концепцию умных людей ,))))

[@luciusirving5926]

I would just use a twin carbon arc torch for brazing.

[@alias8029]

What is the average price for such induction devices?

[@anetthorvath5070]

The price of a car!

[@GWAYGWAY1]

Even better had it been cleaned first rather than using just flux.

[@АндрейКозлов-т1ъ9д]

Так вот где резцы хуёвые делают. Напайки тока и отлетают

[@ARIFINLATHE]

Very simple and practis...👍👍

[@skifseveraskifsevera3114]

Перегрел и на воздухе подкалил. Резцу 3.14зда.

[@artyomo7099]

Я тоже об этом подумал

[@Stas6360]

Почему у меня кипятильник так не работает ?

[@robertobimbat]

Soldei muito com este sistema .. muitas ferramentas,

[@faizalreza5924]

How many watt the induction?

[@gergelydobai1588]

45KW

[@faizalreza5924]

@@gergelydobai1588 thanks

[@hadritoys]

Awesome sharing sir

[@drummerhari6866]

Can we able to change that circular coil to rectangle ? Will it work after changing like that...?

[@gergelydobai1588]

Tisztelt Drummer Hari! A téglalap alakú tekercsel is működik, de kevésbé jó a beolvadás! A téglalap formatényezője ugyan jobb, de nem ott hevít ahol kell!

[@tnsharma8540]

Can u please guide me , how to set parameter for induction brazing

[@grootxtree]

Чото как-то стремно в век сменных пластинок юзать напайки.

[@gergelydobai1588]

Használnak még hagyományos esztergához forrasztott lapkát. Aki tud köszörülni és ért hozzá, annak gazdaságosabb!

[@TechAreaChannel]

@@gergelydobai1588 плюсы только в том, что можно покупать заготовки твердосплавных пластин и самостоятельно точить нужную геометрию под свои нужды. Для больших станков. Это наши: interselt.ru/induktori

[@gergelydobai1588]

Dyakuyu za Vash komentar! Vashi mashyny tezh dyvovyzhni, ya duzhe vas tsinuyu!

[@АлександрГлок-н2ч]

сменными пользуются потому что точить много кто не умеет!)))(лень или неначем) Смутула такая напайка потомучто раскалилась до бела тв.спл. напайка-вредно для неё так!

[@Mahorokun]

@@АлександрГлок-н2ч Или металлы такие,что не каждая пластина "возьмёт"

[@rudy4353]

Music name?

[@gyulavarga5349]

The procedure is not good! The carbide insert overheats! It should be inserted when the copper has melted!

[@900stx7]

I've done this before with a torch and found that if you don't get the carbide red hot the soldier will not flow and the carbide will just fall off. The heat doesn't effect the carbide.

[@gyulavarga5349]

Well, you know that badly! Cracks in the carbide occur due to high temperatures! The tile must be implanted in the molten copper! Do not heat together! Or by a controlled induction process where it is heated only to the melting point of copper. For the most part, its structure weakens even then. This is why screw-fixed inserts are used in more serious places!

[@СанекСанек-д8в]

Очень долго! Таким темпом 300 штук это часов 10.... Я за полсмены делаю... Главное в писочеке после остудить)

[@ИринаЛытнева-о4н]

Приветствую 🖖 Можете видео снять посмотреть , как правильно все делается ?

[@phuctrong7044]

Bột đó là loại dì vậy a

[@RixtronixLAB]

Nice video, thanks :)

[@josephastier7421]

Nice catch at the start.

[@csabakertesz3]

Mekkora az indukciós hevítő teljesítménye?

[@gergelydobai1588]

A gép 50KW-os, a videón kb.20KW-ot ad az induktorra!

[@csabakertesz3]

@@gergelydobai1588 köszönöm a választ, akkor ez olyan mint a medve (nem játék)

[@АНДРЕЙ-х2х3з]

У нас 5 резцов делают за 1.5 минуты..... Метод такой же.

[@wateskajen4563]

Waooooooooo.... Kereeeennnn.... By las wates

[@bayuprabowo4899]

English please🙄

[@maon-giku9422]

幫你按👍，以前小弟也都是利用氧氣乙炔及銅焊來粘車刀片。

[@fredblair4307]

what brazing powder is that

[@gergelydobai1588]

Copper solder + borax flux

[@hossammostafa93]

@@gergelydobai1588 after first time you put the powder you use some sheet what is that

[@woutmoerman711]

I guess the sheet is copper

[@rv5801]

А можно пожалуйста состав припоя? Личный интерес....просто...у нас и на твч пают...и в печах...но все это на латунь...в это совсем не очень...есть еще заводской припой это уже лучше... А еще лучше было но этот секрет унес с собой бывший кузнец...после него даже когда до бела накал делаешь...напайка уже не отваливается....верите или нет...но факт...знаю только что из пяти компонентов состав был...где был победит,медь,бура...и еще что то...

[@РусланСтрелков-т2ф]

Буру с борной кислотой смешайте. И резец после пайки в песок и там пусть медленно остывает.

[@rv5801]

@@РусланСтрелков-т2ф И на латунь?

[@РусланСтрелков-т2ф]

@@rv5801 так точно. При медленном остывании цветные металлы становятся тверже. Так же при медленном остывании меньше вероятность образвания трещин в твердосплавных пластинах. Поверхность твердосплавной пластины перед пайкой лучше зачистить.

[@Николай-р5у4л]

У нас на работе ,кто этим занимался все от рака умерли . До пенсии не доживали .

[@theonlybuzz1969]

Very cool (yes we know that it’s hot). Really enjoyed this one ☝️ ty

[@agushartanto4764]

😂

[@mathiasderivo]

Best music ever!

[@ghlscitel6714]

Very interesting. I would like to know which flux powder has been used. How much Watt has been used in the induction coil?

[@jaguar2587]

Очень долги процесс...

[@precisiontools6190]

uram, mi a fém és a por, amelyet vasfémben használnak, kérem küldjön nekem egy fóliát és port

[@nikhileditz002]

Give the price of this

[@gergelydobai1588]

I only reply by e-mail, search for this e-mail address: [e-mail]

[@jorgepaulo300]

Show nunca tinha visto algo assim como é feito o preparo da ferramenta gostei

[@samodelkin198517]

Что за флюс?

[@highfrequencyinductionheat9912]

Brazing powder plus brazing sheet

[@Halloguys84]

great video

[@danielzunigagutierrez6300]

Should save some stash. Tooling can be more expensive than the job you're making.

[@jayakeah]

Good video

[@PacoOtis]

Rather confusing and discombobulated! Best of luck to you!

[@staarhitsgoldensweetsongs2821]

I need like this kind of induction heater

[@gergelydobai1588]

WWW.DG Elektrotech.hu email.: [e-mail]

[@gergelydobai1588]

www.dgelektrotech.hu We can make such induction equipment!

[@electromeca58]

Enviar información potencia del equipo

[@mohsennekounam7027]

Grasias 🇮🇷🌹👍

[@SunilKumar-gr4ju]

Pleas sir ye bataye ye machinekahan milegi kimat bhi bataye

[@mujahidalikhan4342]

What the hell was that?

[@alexandr727272]

приходишь на барахолку и за 1$ покупаешь и не создаешь себе проблем ))))

[@gergelydobai1588]

Увидимся за водкой и камазом

[@lahcenennajmoui6533]

Good job.

[@gergelydobai1588]

Thank you very much

[@phuongminh4776]

Bột đó là bột gì vậy ạ?

dùng để hàn lưỡi tiện vào

[@phuongminh4776]

@ cụ thể tên của loại bột đó là gì vậy ạ?

[@viorelnagy5049]

Interesant.

[@francismallard5892]

Nothing makes a good video great like blasting the loudest, shittiest music possible.

[@tyobkan9754]

Itu serbuk apa guys

[@stevelamperta865]

has nice equipment but vice grips made in hong kong !

[@gergelydobai1588]

The whole equipment is purely Hungarian development and production! Here the induction technique is important not the suppression. They only got rice in China when this technique was known in Hungary today! 1886 Bláthy, Déri, ​​Zipernovszky! Thank you for your comment!

[@manhhoang8588]

Tuyệt vời 👍

[@Square-Watermelon]

Jesus is God & He loves you Jesus will soon be seen by all men, women, and children up in the clouds. Jesus is returning now! Believe and be saved. Exodus 3:14 (God speaking) And God said unto Moses, I AM THAT I AM: and he said, Thus shalt thou say unto the children of Israel, I AM hath sent me unto you. John 8:58 (Jesus speaking) Jesus said unto them, Verily, verily, I say unto you, Before Abraham was, I am. John 10:30 (Jesus speaking) I and my Father are one. Isaiah 9:6 For unto us a child is born, unto us a son is given: and the government shall be upon his shoulder: and his name shall be called Wonderful, Counsellor, The mighty God, *The everlasting Father,* The Prince of Peace. Matthew 1:23 Behold, a virgin shall be with child, and shall bring forth a son, and they shall call his name Emmanuel, which being interpreted is, *God with us.* John 1:1 & 14 1 In the beginning was the Word, and the Word was with God, and the Word was God. 14 And the Word was made flesh (Lord Jesus), and dwelt among us, (and we beheld his glory, the glory as of the only begotten of the Father,) full of grace and truth. John 8:24 (Jesus speaking) I said therefore unto you, that ye shall die in your sins: for if ye believe not that I am he, ye shall die in your sins. John 14:9 (Jesus speaking) Jesus saith unto him, Have I been so long time with you, and yet hast thou not known me, Philip? he that hath seen me hath seen the Father; and how sayest thou then, Show us the Father? Hebrews 1:1-3, & 8 (God calls His Son "O God" because Jesus IS God in the flesh) 1 God, who at sundry times and in divers manners spake in time past unto the fathers by the prophets, 2 Hath in these last days spoken unto us by his Son whom he hath appointed heir of all things, by whom also he made the worlds; 3 Who being the brightness of his glory, and the express image of his person, and upholding all things by the word of his power, when he had by himself purged our sins, sat down on the right hand of the Majesty on high; 8 But unto the Son he saith, Thy throne, O God, is for ever and ever: a sceptre of righteousness is the sceptre of thy kingdom. 1 John 5:7 For there are three that bear record in heaven, the Father, the Word, and the Holy Ghost: and these three are one. Titus 2:13 Looking for that blessed hope, and the glorious appearing of the great God and our Saviour Jesus Christ; Revelation 1:7 Behold, he cometh with clouds *and every eye shall see him,* and they also which pierced him: and all kindreds of the earth shall wail because of him. Even so, Amen. Isaiah 44:6 (God speaking) Thus saith the LORD the King of Israel, and his redeemer the LORD of hosts; I am the first, and I am the last; and beside me there is no God. Revelation 1:8 (Jesus speaking) I am Alpha and Omega, the beginning and the ending, saith the Lord, which is, and which was, and which is to come, *the Almighty* Revelation 22:13 (Jesus speaking) I am Alpha and Omega, the beginning and the end, the first and the last. --- There Are None Righteous / How To Be Saved Romans 3:10 & 23 10 As it is written, There is none righteous, no not one: 23 For all have sinned, and come short of the glory of God; Luke 5:31-32 (Jesus speaking) 31 And Jesus answering said unto them, They that are whole need not a physician; but they that are sick. 32 I came not to call the righteous, but sinners to repentance. 1 Peter 3:18 (The word “quicken” means “to make alive”) For Christ also hath once suffered for sins, the just for the unjust, that he might bring us to God, being put to death in the flesh, but quickened by the Spirit: Romans 10:9 That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead thou shalt be saved Acts 4:12 Neither is there salvation in any other: for there is none other name under heaven given among men, whereby we must be saved. Ephesians 2:8-9 8 For by grace are ye saved through faith; and that not of yourselves: it is the gift of God: 9 Not of works, lest any man should boast.

[@edier477]

Und ins Kiste mit Sand, zum abkühlen.

[@steelmaxkoiupalamtirur1998]

Naic job

[@pawz007]

Awesome

[@gergelydobai1588]

Köszönjük szépen!A berendezés a mi gyártmányunk, Magyar termék!

[@pawz007]

Szívesen. További jó munkát. Ha lesz alkalmam megmunkálni, megveszem néhány eszközét.

[@clivelee4279]

Rather a long winded performance, for a production process .