Inexpensive Improvements to the HTV Ront Heat Press

[@surgicaltechcrafter2169]

Rotary cutter I'm thinking. and I just got my press yesterday and came across this . Someone also said to just add your cricut heat press mat for extra pressure. Thank you for sharing.

[@MakingwithMarilyn]

I just got a better rotary cutter and I think that could work too. You will be able to get more pressure by adding the Cricut heat press mat, but I wanted a really firm mat like I have on my other heat press so I ended up opting for the one from Amazon. Thanks for watching!

[@DrJami]

This explains why my puff vinyl had a crease! It was my first project with the htvront autopress

[@MakingwithMarilyn]

That could definitely be it. I think puff vinyl is so finicky but it is so darned cute!!!

[@CorettaDangerfield]

Thank you so much for this video. I have the Cricut AutoPress and have experienced the same issue. I bought the new heat pad and updated my heat press as well. I did my first project on Thursday and it was perfect!

[@MakingwithMarilyn]

Thanks Coretta! Yes, I really hated the mat that came with the HTV Ront press. Using a firmer mat is definitely much better for me!

[@Jana-TheCraftyGambler]

Thanks for the pressing pad hack. I went ahead and ordered one and I got it a few days ago. I get my heat press Tuesday so I can get fit it when it comes. I wonder why they don’t correct this issue with all reviews that are out there stating this issue. These silicone heat mats are so cheap it would not cost much for them the change out the mats.

[@MakingwithMarilyn]

I know, I hope they change their pressing mat soon

[@neenee3663]

Thank you for the tips. I haven't had the same problems so far, but I do have a Teflon sheet taped to the top of my press, so I'm going to purchase the Teflon cover you mentioned.

[@MakingwithMarilyn]

It's definitely handy. On my older press, I had a teflon sheet wrapped around the top and then had magnets on it. It worked, but this is so convenient. Thank you for checking out the video.

[@Stephania_77]

I just received my HTVRont and it's still in the box. Now I'll be cutting my mat when it arrives. Thanks.

[@MakingwithMarilyn]

I really like my HTV Ront press after making the improvement to the pressing mat! I hope you like yours as well.

[@thedecadentdog5992]

We loved this press when we first received it in January 2023. We only use it moderately (less than 6 items pressed per use per month). Now it is August 2023 and it will not close. It heats up perfectly but when we try to press it closes and pops right back open and the controls start blinking. It has also started making a grinding noise. I contacted warranty support as the press is under warranty, they responded requesting videos of the problems, we emailed videos back, they responded with they couldn't open the videos (they are too stupid to download them and use a player to view them), we uploaded the videos to our you tube channel (cause everyone has one of those) and sent them the links....There response was to give them significant time to troubleshoot the problem and they would get back to me. I’m sure enough time for my warranty to expire. I asked them point blank to honor their warranty and replace the press…Crickets!!!! Others here have complained about these same issues in the reviews. THEY WILL NOT HONOR THEIR WARRANTY!!! I'll update this review if something changes.

[@MakingwithMarilyn]

Oh no!!! That is terrible! I hope it ends up working out with them.

[@andreastewart4215]

I'm so glad that I watched your video. I caused my pad to have a permanent dent from trying to sublimate on photo slate. I had bought a Teflon sheet for the upper platen and the bottom plate as well as the same foam pad you have in your vid. I still had some uneven spots for sublimation, but I felt vindicated that someone had done the same thing as well. However, you took it one step further and trimmed the mat to fit. 🤯Mind blown! Didn't think of that. I will try that and maybe I won't have the cool spots. So far I've added an extra mat for added pressure, and that has helped, but maybe I need to trim the mat so that my projects are on a flat surface. Thank you for sharing.

[@MakingwithMarilyn]

Thanks so much for your comment Andrea!!! I haven't tried a photo slate yet but have a few on hand. I need to try that soon:)

[@marir1005]

Thank you for showing this. I had to buy a second heat press mat, because the first one was getting wrinkled as well. I bought a thick foam mat similar to the one that you have and I am going to try this.

[@MakingwithMarilyn]

I have had such better luck with the replacement pad that I bought off of Amazon. I hope you do as well.

[@marir1005]

Thank you. I will definitely try it out soon!

[@deliaarts]

Hi Marilyn, good morning, thanks for all you do to help us.

[@MakingwithMarilyn]

Thank you Delia! Please let me know if that is not really your name:)

[@israelmelendez1319]

I just flipped mine and using the bottom side up. So far no issues 😊

[@MakingwithMarilyn]

I'm glad yours is still working well. Thank you for watching and giving others another idea to work with.

[@martahoshell7934]

Hi Marilyn! I tried doing this and it worked. My stuff presses great now. To cut I used a rotary cutter & round edge ruler. Thank you. ❤

[@MakingwithMarilyn]

Yay Marta!!! I have been so much happier with my HTV Ront Auto Press since replacing the pressing mat.

[@hisfavor3607]

Thank you so much. I was trying to sublimate ceramic ornaments, and they were being pushed into the pad and not getting good pressure. I knew I needed to use something stiffer. I order bothe the mat and protector for the top. Thanks again!

[@MakingwithMarilyn]

I hope you have much better results with the new pad!!! I kept that foam pad out of the HTV Ront pressing mat in case I ever need to lift my new mat up higher. I would just add the soft pad under my new pad.

[@jackiewoolard4359]

oh Marilyn...I just ordered that new heat press and after watching your tips i went ahead and ordered to new pad and the teflon cover as well. I had an opportunity to sell my other heat press so I thought i would replace it with this one. Thanks once again for your great informational videos!!!!!

[@MakingwithMarilyn]

You're welcome! I did find on one shirt that I did a couple days ago that I still needed to use a pressing pad, but the it did really well.

[@TheShugluv7777]

This is great info! Thank you, I just took the pad off my other press and used that on top. Made it more difficult to get shirts in the press. Now I will do this 🤩🤩🤩🤩🤩💕💕💕

[@MakingwithMarilyn]

Thanks RUG'l!!!

[@DodiePajer]

Ooh, I really like this idea! Why didn’t you add a piece of butcher paper between the mat and the grey material as well as between the design and the cover? I just found your channel and will explore more. Thanks.

[@MakingwithMarilyn]

Thank you! I typically do use paper to protect my heat press pad and the top, so I'm not sure why I would have skipped that step:) Thank so much for watching.

[@kristispangler9435]

Oh, these tips were excellent, Marilyn! I love my HTVRont Heat Press but was I was a little frustrated with adding that extra Teflon sheet every time. My last press I could use the magnets hack and it worked well protecting my platen as well as saving me a few seconds with each projects' final press. So I'll definitely be adding that item to my cart. I have already purchased a dense mat and will be following your instructions for cutting it down to size. Thank you so much!

[@kristispangler9435]

Oh, and I wonder if one could/should be used on the lower platen as well??

[@MakingwithMarilyn]

If I am doing sublimation on the press, I put a piece of butcher paper under my shirt/blank to protect the bottom platen. Thank you so much for watching!

[@yanxacreations]

Nice. You always sound so calm lol

[@MakingwithMarilyn]

I do on the videos, but I was a hot mess trying to learn to embroider on a live event last night:) But I finally got through it despite my trials. Thanks so much for watching YanXa!!! I love your videos!

[@yanxacreations]

@@MakingwithMarilyn hi yeah i wanted to see the live but was having trouble with my printer and trying to fix it. I will watch the video though. And thanks on the videos

[@adubs4510]

Just ordered the mat and cover! Thanks for the great tips. I think I will make a template out of a thicker cardboard box for the corners. This way the exacto knife doesn't get in the way. :)

[@MakingwithMarilyn]

Great idea!!!

[@Hanah422]

Wow this is awesome! I used a protractor for the curved edges and it worked a treat :)

[@MakingwithMarilyn]

Great idea for rounding the corners!

[@marybrown1131]

Thanks for this info. I haven’t had a problem with mine yet, but if I do, I know what to do to fix the issue.❤️

[@MakingwithMarilyn]

You're welcome Mary! Hopefully you won't have to:)

[@dianemarin2110]

I incorporated these and I’m so happy I did. Thank you so much for your suggestions.

[@MakingwithMarilyn]

I am so glad they worked well for you. The firm pressing pad was such a big improvement for me.

[@PictureMeCrafting]

Hey Marilyn this is an amazing fix. Thank you!!!

[@MakingwithMarilyn]

Thanks for watching Merlinda!

[@ruthanndeline6931]

Thank you Marilyn for doing this vid, I am almost ready to order this press as it still has so many good reviews, I will order the two different pads at the same time, thank you for taking time to let us know how this can be remedied to have greater results.

[@MakingwithMarilyn]

You’re very welcome. The top cover is an added luxury but I feel the better pressing mat is a must, at least for me.

[@ruthanndeline6931]

just ordered this press today, so excited. I will be ordering the two pads as well. thanks again for sharing the tips. @@MakingwithMarilyn

[@denben8530]

@@MakingwithMarilyn do yu take that off when you are doing just htv vinyl thanks i just ordered mine and hope i am going to like it my first big heat press so kind of anxious. i dont have sublimation stuff so if i do decide to do sub i will buy sheets already with the color on or use the infusible ink.. thanks for the review great job

[@MakingwithMarilyn]

@@denben8530 no, I just leave it on for everything. That’s a great way to start into the world of sublimation.

[@CyberLabStudio]

What printer did you use for the DTF hack and did you have to do any modifications to the printer itself for it to work properly with the film or is it still interchangeable with the DTF hack and regular Sublimation printing on Sublimation paper?

[@MakingwithMarilyn]

I have used an Epson Ecotank 2760 and an Epson Ecotank 15000. I have not modified either printer to do it, so yes it is still able to do regular sublimation printing on DTF paper.

[@TYJ419]

I used my Tim Holtz scissors which I wouldn't say was better but was OK. If thinking, I would of used the Xacto knife too. Thanks for the shout out! I think I'll cover my top platen too. I have a piece of Teflon and if big enough may try making it. Tracey

[@MakingwithMarilyn]

That's what I did on my other press when I got it. I wrapped a large teflon sheet around it and kept it on with magnets. Thanks Tracey!

[@marilyncuevas5531]

Thank you Marilyn ❤️

[@MakingwithMarilyn]

You're welcome. Thank you for watching!

[@Nicole_Gucci_Baby1k]

Marilyn question Since you changed your padding to the new one does it or what do you need to do to make puff work with your HTV Ront??

[@MakingwithMarilyn]

I don't use puff vinyl. But before I added my new pad, I could not get HTV to work really well, and rhinestones weren't sticking well. I have some puff and can give it a try on the HTV Ront.

[@Nicole_Gucci_Baby1k]

@@MakingwithMarilyn if you could make that video because I’m dying to know I ordered my pad. I am waiting on it honestly it’s killing m. I have my puff just sitting here waiting and I don’t want to use it until I know if it’s going to work.

[@Nicole_Gucci_Baby1k]

I searched all over KZbin for a HTV Ront Puff video all say it doesn’t work not enough pressure

[@MsHenry-or3gp]

Question: Should I place the new pad in the cover of the one that came with the machine?

[@MakingwithMarilyn]

I replaced the old one with it. I do not use the old one at all.

[@lisahelfrick7284]

Question: Why would you put the wrap around the heat plate? I just use butcher paper..What is the benefit of the heat wrap? Thanks

[@MakingwithMarilyn]

For sublimation, I use butcher paper. If I am doing multiple layers of htv, I like to protect the exposed htv layers. Just person preference. Thanks for watching!

[@CraftingwithDelonda]

Great info

[@MakingwithMarilyn]

Thank you!

[@UNBIASEDLLC]

OH my! This is an awesome fox and idea. Thanks for sharing Queen

[@MakingwithMarilyn]

Thank you Unbiased!

[@uprayup]

thank you!

[@MakingwithMarilyn]

You're very welcome! Thanks for watching.

[@rogerlondono2521]

Great video. I have this press and one thing i noticed when I made mouse pads was the pressure. I don’t think theres a way in adjusting pressure right? Making ur DTF said firm pressure but you didn’t discuss that on the press. Any suggestions on that?

[@MakingwithMarilyn]

There is no way to adjust the pressure. However, in the video I just published last night, I showed how I added pressure with more padding under it. Check out "Sublimating a License Plate with an HTV Ront Press" from yesterday on my channel if you want to see it.

[@latriciacreates]

Thanks for the tips. I think that pad is a great addition to the press.

[@MakingwithMarilyn]

LaTricia, I do too! Thanks so much for watching!

[@kcastillo0319]

Hi, Marilyn. Talk about DIY. Good to know if I ever invest in this press. I got the 12x10 Vevor you demo'd. I really like it. I didn't find an upper platen cover, but it's small enough that I could wrap a Teflon sheet all the way around and attach to the top with strong magnets. I'd seen another crafter do that. Works fine and that way if I forget to put down a protective sheet, no worries.

[@MakingwithMarilyn]

That's exactly what I did on my regular heat press. Teflon sheet and magnets.

[@tracegates]

Good idea on cutting the pressing mat to fit. I bought a mat a couple weeks ago, but haven't tried it yet. I have the light blue version of the HTVRont auto heat press and like it so far, but felt it needed a firmer mat. Going to go get a platen cover now. Love the tips!

[@MakingwithMarilyn]

Thank you!

[@stauniqueprintwear2705]

Thank you Marilyn, great idea!

[@MakingwithMarilyn]

Thanks so much. I still think some things might need a pressing pillow or the foam from the old mat under the new mat for more pressure, but so far this works:)

[@efdes908]

Thank you for your video and that was great information. Is this press good for 3d Puff?

[@MakingwithMarilyn]

I have barely used puff vinyl but Angel B hasn’t had good luck with puff in this press.

[@efdes908]

Hi Marilyn thank you for your reply appreciate it. Wishing you a very happy Christmas and wonderful New Year.

[@robertag.3782]

Bellissimo video grazie proverò ho comprato la pressa ma quando provo a fare le cornici di pietra mi lascia una macchia nel centro della cornice e ne ho buttate via un sacco e non so come risolvere questo problema .....complimenti per la tua idea cmq !!! 🙂

[@MakingwithMarilyn]

Thank you so much!

[@merlehendricks5486]

How thick is your pad purchased from Amazon?

[@MakingwithMarilyn]

Here is a link to it. It says it is .33 inches thick. amzn.to/3UO08pt

[@anitahaskins6900]

Hi Marilyn, on the replay. I cut my corners with the rotary blade.

[@MakingwithMarilyn]

Thanks Anita!

[@TheShugluv7777]

I did the change like you showed and things are better!😃🤩

[@MakingwithMarilyn]

I'm glad it was helpful! I'm a bit of a control freak and would love to be able to adjust the pressure, but I sure am happier with it using the new mat:) Thanks RUG'l!!!

[@deliaarts]

How about the roller knife to cut fabric has light and heavy cut,

[@MakingwithMarilyn]

Good suggestion for anyone else that might have this issue and is ready the comments - or if I end up having to do this again:) Thank you!!!

[@doreenrosario9808]

Hi Marilyn I am considering buying this press. My question is can you do a prepress? or do you have to reset the timer?

[@MakingwithMarilyn]

You can just press a button anytime to get it to lift. So, I don't reset the timer to do my represses.

[@dorotheafitzhugh4527]

What heat setting should I use for pressing rhinestones?

[@MakingwithMarilyn]

I use 350 for 15 seconds. If your stones come with different instructions, I would use their instructions since they may be made with adhesive that has a different melting point.

[@omarnervegna]

This is a great review. I'm new to this type of thing and I'm trying to apply "Siser EasyWeed Adhesive" as a first step to later adhering foil to a jean jacket and on the first try it didn't stick. I used the manufacturer's specs, 300 degrees for 5 seconds, but it didn't work. Can you tell me if I would have to change some of the settings? Temperature, time or pressure? I don't know if the pressure can be regulated in this type of heat press

[@MakingwithMarilyn]

I have not tried that product in my htv ront press but even regular htv wasn’t great in it. You can’t regulate the pressure but the new pressing mat is much firmer so I feel the article gets better pressure.

[@omarnervegna]

@@MakingwithMarilyn Thank you so much

[@cerebralartworks]

I'm somewhat new to sublimating and have this press, about 3 months now. Is it normal for the plastic cover nearest the heat plate to turn yellow from the heat? Didn't know if I'm doing something wrong or if it's a normal wear issue. Have you had this happen since you have had yours for a while?

[@MakingwithMarilyn]

I don't think that is normal. The white plastic on mine has not discolored and I have had it quite awhile.

[@cerebralartworks]

That's what I was afraid of when I could see yours nice and white still. Looks like I need to reach out to their customer service. Thanks, btw I love your content, its helped me a ton. @@MakingwithMarilyn

[@Babs-Veterans-are-Family]

A rotary cutter with an acrylic ruler may work better. Joann's and Hobby Lobby both carry round acrylic rulers. Hobby Lobby runs 40 percent or 50 percent sales on notions every other week. Harbor freight has rotary carpet blades cheap that work too.

[@MakingwithMarilyn]

Good to know! I've never seen a rounded acrylic ruler. Being able to see through it would also be a plus! Thank you.

[@mlistander]

Hi Marilyn may name is Marilyn too! Was the material you used the dtf cotton or polyester?

[@MakingwithMarilyn]

Nice to meet you, Marilyn! The fabric was cotton. I had cut up a gray t-shirt and it was part of the T-shirt.

[@lynnebizlyne436]

That will probably help with the “not enough pressure” complaint. Good tip. I had been debating on getting an htv Ront press but for each time I hear “I love it” I run into someone else saying “the pressures not good” 😳😵‍💫 so still on the fence lol

[@MakingwithMarilyn]

The new pad was a very big improvement over the pad that came with it. Thanks for watching, Lynne!

[@ashleyking1052]

Hi there!!! Love your videos! I have an auto press. I am having difficulty getting even presses when I’m sublimating and I am noticing that no matter how much tape I put down, there is some ghosting (a problem I thankfully never ever have) I’m wondering if there is some movement when the press rises? Any tips & tricks u could offer would be most helpful! Thanks so much in advance!!!

[@hannahkhalil8993]

Can anyone been able to get this machine to work with puff vinyl? If so I need help.

[@jacquelinesmith2932]

Mrs. Marilyn what type printer you are using

[@MakingwithMarilyn]

I used an Epson Ecotank 15000 that is filled with sublimation ink on my dtf hack project in this video. Thanks for watching!

[@dorthagrzan9792]

Would you kindly link the Teflon cover? Thanks

[@MakingwithMarilyn]

You bet. Here it is. Teflon Top Platen Cover amzn.to/3hVtxgg

[@dorthagrzan9792]

Thank you so much. There were just so many to choose from. Thank you for the great tips.

[@willieroseman1432]

Hi Marilyn, I’ve only used my press three times. The last time I used it, there were like popping sounds coming from it as it heated up. Has this happened with yours. My mat is lumpy as well after using it only three times.

[@MakingwithMarilyn]

I have not had popping sounds from this press. I have had some noise from my other press, but not loud popping noise. Does it still work okay, hopefully? Yes, that mat is problematic and in my opinion, they need to use different ones that will allow better and more even pressure. But then again, I'm no engineer:)

[@willieroseman1432]

@@MakingwithMarilyn Yes it still works ok. I emailed the seller but have not got a response yet.

[@MakingwithMarilyn]

@@willieroseman1432 hopefully you hear back soon

[@kathyd5394]

Mine made loud, scary popping sounds the first few times I used it but stopped after a few times.

[@MakingwithMarilyn]

@@kathyd5394 Sounds scary but I'm glad it is working and doesn't do that anymore!

[@sondrashackelford6743]

What kinda heat press are u suggesting we use please, this is all new to me so im gonna need help. Thanks Sondra

[@MakingwithMarilyn]

If I were getting a heat press, I would go with your standard heat press that you work manually and can adjust the pressure. That way, you can do things like puff vinyl if you want to. My regular heat press is an inexpensive 15" x 15" press that I got off of Amazon. It has been discontinued, but there are several no name presses just like it. I love the HTV Ront autopress for rhinestones, but I would not want to be without the standard press. I hope this helps.

[@Tippy7795]

Great video... Thanks for the tips 💜

[@MakingwithMarilyn]

Thank you!

[@Jana-TheCraftyGambler]

Anyone who needs to do this, a really good pair of scissors work really well on this material.

[@MakingwithMarilyn]

Thanks Jana!!!

[@niecytell9429]

Great video iam getting one but iam steel researching. Do you know wear I can get that basket ball mom logo I want it for my daughter thank you

[@MakingwithMarilyn]

Is this the one you are asking about? www.creativefabrica.com/product/basketball-mom-sublimation-2/ref/1340608/

[@BlueLotus726]

Oh that's pretty thank u for sharing

[@MakingwithMarilyn]

Thank Jeanita!

[@Bplays2u]

Do you have a website to purchase

[@MakingwithMarilyn]

This is the one I bought. amzn.to/3Gp6NPk

[@jessiegibson9023]

Good video thanks

[@MakingwithMarilyn]

Thank you Jessie!

[@janiseperez2031]

Does the stitch button stay on when its off on my heat press htv ront

[@MakingwithMarilyn]

I'm not sure what the stitch button is?

[@janiseperez2031]

@@MakingwithMarilyn the power button on my auto heat press htvront

[@janiseperez2031]

@@MakingwithMarilyn even though It off It keep blinking

[@MakingwithMarilyn]

@@janiseperez2031 my light stays on non-stop also. I don't really like that feature.

[@latenightcraftingwithstace3009]

REWIIIIIIND!!!!!! HEY MARILYN.❤❤❤❤

[@MakingwithMarilyn]

Hey Stacey!!! Thanks for watching.

[@cmcv2000]

That Teflon cover is out of stock now

[@MakingwithMarilyn]

Thank you for letting me know. Hopefully it will be available soon.

[@arenee617]

Can you place the pillow info from Amazon in the chat.

[@MakingwithMarilyn]

Sure. The pressing mat I bought is this one amzn.to/3Q1uyQJ

[@tjroane]

lay the original mat down on the replacement mat and trace the corners with a marker. Cut freehand following the traced corner lines.

[@MakingwithMarilyn]

Thanks for watching and the suggestion.

[@HeatherHunterJ]

MacGuyvering with Marilyn 🎉❤🎉❤🎉

[@MakingwithMarilyn]

You have such great names for me:) Thanks for watching.

[@kumarshrestha1449]

This is absolutely exactly what I did and it worked, but still there is no good pressure with the machine

[@MakingwithMarilyn]

I wonder if you have a faulty machine. How long have you had it?

[@TheBestUni]

❤❤

[@Livingandcooking]

Marilyn: Makes everything look easy and perfect cuts Me: Follows Marilyn, misses the cut, slits an artery, in emergency room for 17 days 🤦🏽‍♂️🤣

[@MakingwithMarilyn]

Too funny!!! Thanks for watching!

[@preciouspeaces]

TFS👍🏽

[@MakingwithMarilyn]

You're welcome Nicole. Thanks for watching!

[@AzPurpleLady]

THEY DO NOT HONOR THEIR WARRANTY!!! I went round and round with them sending them the pictures they requested along with every other piece of information/evidence they asked for. When I demanded they either replace the unit or give me a refund they informed me that I had to pay for return shipping unless it was a quality problem. The fact that I couldn't make a shirt that was good enough to be sold wasn't a quality problem? I contacted my bank and disputed the charge. After 2 weeks the temporary credit the bank put on my account was made permanent. Evidently the company never responded to their request for information. So buyer beware. You could be stuck with a large door stop. I went back to my manual press so I could get orders out.

[@MakingwithMarilyn]

That is terrible. I'm glad it worked out for you with your bank.

[@karenuebler5745]

I followed the link for the telflon top platen cover and it does not fit the HTV Ront heat press, they must have changed the size since 2022. when Marilyn put it on her machine it went on like a glove, not so with the actual cover, it doesn't fit and there are plenty of reviews on Amazon that say the same thing. What a waist of my money!

[@MakingwithMarilyn]

Oh no! I hate that. I do see that two people said it didn't fit right. I would definitely send it back. Sounds like it is hit or miss. I'm sorry you had that experience.

[@pcpcnow]

😳🔥😮

[@MakingwithMarilyn]

Thanks for watching!

[@TshirtChick]

👀👀

[@MakingwithMarilyn]

Hey TshirtChick!!!

[@NERO-ez1mn]

i think the 1st layer is a HEAT INSULATOR

[@MakingwithMarilyn]

Thank you!