Infiniti Q50 LED emblem Install | Most Thorough Tutorial on YouTube!

[@lPIRODIGY]

Just want to repeat a comment that I saw here. The 2018+ all come with a plug already. You can find it around the middle of the front bumper. You dont have to remove the bumper to access it. Just kinda feel for a wire up under the front of the hood. Youll feel the plug. Pull on it a little and the tape will come loose. Just peel the tape and plastic back then splice into it. Made the install super easy.

[@babz_jcw]

If any of the Q50 fam has a 2018+ there should be a plug off the wiring harness attached to the inside of your grille (It’s there for the factory LED emblem from Infiniti). Match your wires from your aftermarket emblem to the plug (gray is power and black is ground). You’ll save yourself the hassle of running wires and splicing to the headlight wire.

[@SpeedCultureStudios]

Great input!

[@Sincerelyyjay1]

I have a 18 luxe and installed the emblem, but I can't find that plug you're talking about. I also don't have the factory led emblem, just the regular chrome one.

[@Sincerelyyjay1]

Is the plug on the driver side grill or passenger side? I cannot find it.

[@babz_jcw]

It’s most likely taped to the group of wires at the top/middle of the grille

[@gardenboyz22]

Is there a tutorial for the newer models?

[@Qbleezy24]

Yes the black emblem with the led looks better than the chrome emblem with led

[@LuisHernandez-re6xc]

On this color huh

[@Qbleezy24]

@@LuisHernandez-re6xc hell yeah.... I want to get this emblem, but sadly im selling my Q

[@ciyo11]

I swear to god i love you dude. Ive been searching on how to install my light for 2 months now🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽

[@SpeedCultureStudios]

I saw some other vids on KZbin that were terrible so I knew I had to make one! Glad you found it!

[@262paul]

One of the best tutorials I've ever seen on KZbin 👏👏👏👏

[@SpeedCultureStudios]

Hell yeah!

[@SicilianSVT]

Awesome video on how to do this. Good job! Do you have a link on an emblem for a 2022 q50? The earlier one will not work as the mounting brackets are too short.

[@elijahjones6700]

I have the rgb emblem coming in the mail soon and this install helped out a lot for prepping for my install because after watching the rgb emblem install that you recently made I still had a ton of questions but referring back to this one which was much more thorough I’m pretty prepared. Great video!

[@SpeedCultureStudios]

Very nice! It’s a simple install. You’ll be fine!!

[@abrey6688]

where did you get the rgb emblem

[@jPuma817]

great video, very thorough, my only issue was no night time pic/video? to really see the emblem pop

[@darieng619]

Thanks. Just got doing this. Couldn't have done it without you. Getting that pink wire spliced was a pain in the ass since I couldn't figure out how to get the headlight harness off. Also, it took me about a half hour to get the airbox back in. But I got it done. Thanks for the help.

[@schecterdiamond177]

How did you get the harness off? I’m having a hard time unplugging it from the headlamp. Hard to see and feel. Not trying to break it. Fingers are sore 😆

[@alexcarrasco7946]

Really helpful video bro, i stay away from wiring because I’m not the best at it. But this video made everything so simple, installed the emblem on my friends car and it looks great bro real helpful video 🔥🔥

[@SpeedCultureStudios]

Really glad to hear that!

[@danielcortez1360]

Would I be able to splice into the wires where the bulb goes for the headlights?

[@ceo4eva]

For those with a red sport, mine is a 2017 and there's a screw on the back of the emblem. I did mine while doing my HE so the bumper was already off.

[@SpeedCultureStudios]

Good detail to point out!

[@sarimusman2904]

Did you ever have troubles with the app? Because I wanna control it through there but for some reason it won’t connect ! But helped a lot thanks !

[@SpeedCultureStudios]

Sometimes it has trouble connecting. Just uninstall the app and reinstall

[@jrod7153]

what’s the app called for this emblem

[@DV8N1]

This wouldn't be something that'd come factory direct installed would it? Finally just got my Q50 '18 luxe, with multiple Sport packages and saw the car already has this installed. Just seems odd someone would specifically seek this out, yet not customize anything else... It's sharp looking, but I'm going to either buy an opaquer pen, or see if my local tint guy has one on hand to subdue the light output at night...it's just a bit much for me. As I have the iridium blue color...what are you thoughts on doing this either standard black or possibly a deep blue to compliment the rest of the car? Your thoughts are appreciated. Keep up the good work! Nice ride

[@SpeedCultureStudios]

I'm all for trying things out. If it's too bright for you, i'd be interested in seeing what you come up with.

[@Voltis-5]

Can I go tap to the fog lights to power these up? Great vid as always 👍 thanks for posting it

[@SpeedCultureStudios]

You can!

[@Voltis-5]

@@SpeedCultureStudios might go that route instead. Thanks.

[@SpeedCultureStudios]

@@Voltis-5 totally fine if you want it to come in only when you have fogs on.

[@drzchulo1010]

Do you think you would’ve been able to add a prong onto the emblem wires to just plug into the harness ?

[@SpeedCultureStudios]

Probably. I would have preferred that.

[@asvp-ant1165]

Can you just wire it to the battery or would it be to much for the emblem?

[@SpeedCultureStudios]

It would never shut off…

[@Alex-_-_-]

Thank you so much for this tutorial!!! I got my LED emblem this monday and i was looking for a good way to do it on my own. The other videos on youtube are .......... uum .... they are sth. ^^

[@SpeedCultureStudios]

Exactly lol! I knew I had to make one because the other ones out there are junk lol

[@GlideDropz]

Can you guys share the link where you got yours? And also does it matter what year the car is for the led emblems ?

[@mattb8135]

First! Yo J, love the vids as always! Hope you are holding down Greenville!!

[@SpeedCultureStudios]

Always bro lol! I appreciate the support!

[@handlerone5172]

Old video so don't know if you'll respond, but that air intake cowl is it flush to the filter piece? Mine is the OEM cowl and there is some space between the insert pieces of the cowl and where my filters are located. I assume it is meant to be flush so no air escapes or is sucked inside.

[@SpeedCultureStudios]

Correct--it should fit snug into the air box.

[@handlerone5172]

@@SpeedCultureStudios Well, explains my drag upon acceleration. Thanks for the answer! Would you happen to know where you purchased yours by chance?

[@seangibson2160]

You mention something like a needle at the tip of the wire that you would have preferred to use. What is the correct name for said tip/needle, and where can one obtain it?

[@SpeedCultureStudios]

They are probably just called pin connectors.

[@eddiecarcocastellano7545]

Mr. speed I have a question I purchased the OEN led emblem with the plug it comes with dealer assist download instructions pan flit CRAZY complicated process. I also have the DIode always on module. What advise can you provide I ask you because you be all in and outside of your Q in advance I appreciate your assistance

[@Boracay98ftw]

I spliced my wire to the headlight and tried to test the ground wire for power to the emblem but got nothing, any suggestions?

[@KingNateTv]

Did you cut the pink wire before u put on the quick splice

[@SpeedCultureStudios]

No cutting. Just spliced into it

[@KingNateTv]

@@SpeedCultureStudios thanks .. just completed my install thanks to this video 🤗

[@UnknownExcalibur7]

The issues i'm running into is removing the electrical connectors. Kinda tough to remove.

[@SpeedCultureStudios]

Tight space

[@josuebarajas3748]

Which emblem is better one with no carbon fiber or one with carbon fiber??

[@SpeedCultureStudios]

It’s all preference man. I think if I got it again I’d get the one with the carbon background for a little contrast

[@jersonmancebo7453]

What you recommend me if I want to take the bumper off do you have to disconnect everything and re wired again when out the bumper back on?

[@nickkk5051]

Have you faced any complications after installing the illuminated emblem, with removing the bumper? Like do you have to unwire everything now to remove the bumper completely?

[@SpeedCultureStudios]

It’s only 2 wires to disconnect. Not a big issue. Don’t take the bumper off all that often

[@lucyfarias12]

Did you have any trouble with the app? Ours won’t work and it won’t change colors

[@SpeedCultureStudios]

The app is terrible unfortunately. Try uninstalling then reinstalling. Just have to do that until it works

[@inxwetrust8660]

Whats the name of the app recently just set mine up but dont know what app to use

[@DamianM1k]

Hey bro I’ve had mine for about 3 months now and today it randomly didn’t turn on.Ive checked my fuse and everything, do you think it could just be the emblem itself?

[@SpeedCultureStudios]

Could be yes. Otherwise your head lights wouldn’t be working either

[@dbsimms63]

Nice. Who makes this emblem and how much? Also where did you get the lower piece for your front bumper?

[@SpeedCultureStudios]

The emblem is from Jaliscos carbonfiber. They have a website or you can find them on Instagram. The front splitter is from amazon. Every part I have has been documented and is typically linked in the description of the video

[@JusVibe809]

What’s the app called? I don’t know if I have the right app

[@eddyg11]

Hey speed I installed my carbon fiber led emblem from Jalisco’s CF the install went good, emblem was working for a week and a half until out of no where it just wouldn’t turn on anymore. I followed the steps from this video, I installed and reinstalled numerous times I re grounded with a new wire connector and still nothing. What are your thoughts? Thanks!

[@eddyg11]

*Installed a reinstalled the app numerous times*

[@SpeedCultureStudios]

The app can be the issue, but it’s possible the emblem itself is not good

[@eddyg11]

@@SpeedCultureStudios yeah I’m convinced it’s the app tbh because I just installed a new emblem yesterday Jaliscos sent me and it still doesn’t work. I mean what are the chances I get two faulty emblems lol ! I’m thinking I’m not splicing the pink and red wires correct but it’s not that hard to do I’m just following the steps on here. Thanks for your reply!

[@eddyg11]

Also what washer size did you add on 11:37 ? (:

[@Vueie12]

did u fix the issue? got a 2018 doing the same thing, keeps coming on and off intermittently

[@xYrnAntx]

Which size washer did you use for the ground cable ,on the intake box screw?

[@SpeedCultureStudios]

I’m not sure. Whatever I had in my random hardware bin. Honestly doesn’t really matter-whatever fits.

[@scarss3476]

i’m looking for 2018 to do wiring but it is complicated the wire plug doesn’t want to come off

[@SpeedCultureStudios]

The plugs are so tight

[@69RoxSox]

What app do you use to control the light?

[@seangibson2160]

Hey J. just curious. Where did you get that different engine cowl? am i seeing the sticker correct? (Hspark?)

[@SpeedCultureStudios]

That is just the factory shroud. I just put a Hotchkis sticker on it since they were supportive in sharing my content after my sway bar installation.

[@Jrose91xx]

Could have just reached hand behind grill from engine bay remove one screw and clips push emblem out... clip in new emblem run black to ground can wrap wire around the intake bolt screw that holds intake in place... run red down to passenger side fog light reach through fender liner to grab it than in-line splice or just splice to fog light connector connect back to fog done

[@SpeedCultureStudios]

I would not wrap the wire around a bolt. I like having proper connectors. Taking the intake box off is just as easy as pulling the fender liner and necessary to make proper ground connection. I’d recommend the way I described

[@iyadhoshi6890]

Thanks for the east eay u teaching us , I wish u cab install my light in my infiniti qx50. Hope u can

[@juliansanchez8367]

Do you have to snap off the harness to tap the power n link or just tap right on?

[@SpeedCultureStudios]

If you can access the widely conveniently without unclipping it I’m sure you can

[@robertsanchez5461]

I installed one on my Q50, now it changes colors by itself once its set and driving. how can I keep the same frequency??? any ideas.

[@SpeedCultureStudios]

You have to select the single color

[@Landonsprasky]

Hey boss I recently put it on my car and it won’t turn on at all or connect to the app did you have any issues with that at all and if so how did you fix it?

[@SpeedCultureStudios]

Either the light is bad or you don’t have a good connection to power

[@Landonsprasky]

@@SpeedCultureStudios yea because I put it on the nuts connected to the battery and it wouldn’t turn on I wired it to my fog lights and it didn’t turn on at all and it was grounded correctly to

[@SpeedCultureStudios]

@@Landonsprasky so must be defective if you tested it directly to power. Dumb question but have to ask-did you make sure you put the correct wire to + and - ?

[@Landonsprasky]

@@SpeedCultureStudios yea I did and I used my buddy tool to see if the wires on the led emblem were getting power to them from my battery terminals and they were def a defective led emblem getting a new replacement one soon but I think the led emblem wires werednt connected onto the logo correctly therefore it was faulty

[@speedy1899]

I got a check engine after installing with these trouble codes P2138 ( Accelerator Pedal Position Sensor) C1130 ( Eng Signal 1) C1109 ( Battery Voltage [Abnormal] ) Did I do something wrong? I followed all the instructions shown in the video

[@SpeedCultureStudios]

Not sure it’s related. It’s a very basic install so if you tapped the correct wire, you shouldn’t have an issue.

[@masonkinsella1732]

I’ve installed this and my battery kept dying every couple of days on me. So I bought a “gel” battery and two days later it was dead again in the morning. I don’t know what to do. All I have is underglow lights and the emblem. What should I do??? I’m too the point that I’m about to just rip it all off the car. No point in making it look good when I have to ask people to jump me off

[@SpeedCultureStudios]

You have to figure out where the draw is coming from. There is something pulling power even when your ignition is off.

[@uglybuckling278]

I’m also having this issue

[@hadleighmurad]

Nice tutorial! love the end.. "I like it" "thats it...?" lol also where did you get your eyelids from? 3M double sided that down or did you use something else? cheers!

[@SpeedCultureStudios]

Hey thanks for watching! Eye loss were from eBay I believe. And yes they come with 3m tape on them. I have since removed them and just used vinyl wrap and cut them to the shape I wanted

[@joshturman1821]

Got that emblem in today. But I'm having an issues if you might be able to help me out. I have installed it and tapped into the R/H headlight wireing harness. I used a quick splice clamp to splice into the main head light. (Pinkish) wire. Everything looks good but now my halo and eyebrow LEDs are coming on? The main and the emblem work. I only tapped that one wire. Any ideas

[@AlbertoRamirez-h6g]

Old video but is there a way to connect the power to the daylight running lights

[@SpeedCultureStudios]

You can tap into whatever power source you want. Just know that it’ll be on whenever that source is getting power and off when it’s not

[@MotionWork_305]

Question what if I need to take of the bumper for Wtvr reason. Do I have to undo everything?

[@SpeedCultureStudios]

There isn't a whole lot to undo--you'd just have to disconnect the 2 wires.

[@Bwonan01]

Is there one that has power when parking lights/headlights on, so it comes on when just the parking lights are on as well? DOnt have my voltmeter handy :-|

[@SpeedCultureStudios]

I'm not sure which wire that is honestly. I didn't test all of them. I didn't think to have it on with just the parking lights because it would likely be daylight and it would be hard to see the led anyway.

[@taysungpro90]

Will it be any different for 2017? I see a pack of wire right on the surface of the engine block? Are those head light wires? Or I must remove air box to access the wires?

[@SpeedCultureStudios]

No headlight wires above

[@evankastenschmidt1227]

I’m confused. Is it “no, headlight wires above” meaning they are above or “no headlight wires above “ meaning they are under the air box

[@mikeschaner5853]

Got mine in yesterday... Looks awesome

[@Esechapin]

I just got a q50 I wanna get drop in filters what do you recommend I’ve seen K&N filters get dirty I also saw you recommended some dry filters? Not sure what to get for best performance it’s my daily

[@SpeedCultureStudios]

I recommended the dry ones for a reason. They are the best option

[@Esechapin]

@@SpeedCultureStudios thank you and do you have a certain brand you recommend? Thanks for responding by the way 🙌🏼

[@SpeedCultureStudios]

@@Esechapin aFe - I have a video on them. Pretty much anything you’d want to know inhale a video on. Check them out!

[@airwreckbee313]

Need this for the Q70!!!

[@a.d.c7941]

I just ordered one for my q70. Same place he got his.

[@KingKongDill]

Which wire is the DRL for driver’s side headlight? I’m installing the LED emblem i tapped it wit the green wire first but I didn’t have power and now I did. to the pink wire (headlights) and I get the power only when headlights on. I want it on basically wit the DRL and EVERYTIME I lock/unlock the car, which wire should I tap it with?

[@SpeedCultureStudios]

I’m not sure off the top of my head. You might need to use a test light to check the wires out unless someone can chime in with the correct wire.

[@HomicidalKings]

Did you ever figure out what wire it was?

[@KingKongDill]

@@HomicidalKings Nah Bro i just tapped it on the headlight wire

[@dansteben6964]

for q60 would it also be the pink wire you tap into

[@Se7enMile-Slider]

Do these fit G35s

[@SpeedCultureStudios]

No

[@carlosalejandro7315]

Does the light bleeds at night?

[@SpeedCultureStudios]

Not at dusk anyway-haven’t looked at it in dark dark yet

[@datboiralph7429]

I installed everything and it worked fine, I was changing the color and it just turned off and hasn’t turned back on since, I tried deleting the app and downloading it multiple times, I know it’s not a wiring issue. Anyone can help?

[@stephonbessellieu2846]

@datboiralph7429 same issue..did you ever figure it out??

[@DamianM1k]

@@stephonbessellieu2846you ever figure it out ?

[@Daniel-yf1li]

Is the diod dynamics module something you had to install or it came with it?

[@SpeedCultureStudios]

Totally separate mod

[@Daniel-yf1li]

@@SpeedCultureStudios gotcha thank you. Any idea if wiring this emblem incorrectly could lead to damaging the leds or something? I've just got my 3rd installed and it lasted me 2 days before some leds failed and now can't produce one full complete color

[@SpeedCultureStudios]

@@Daniel-yf1li I don’t see how wiring it incorrectly would damage anything. It’s very low voltage-it just wouldn’t turn on. And it’s only 2 wires so you can even wire it wrong. One is a ground and the other goes to a power source

[@Daniel-yf1li]

@@SpeedCultureStudios so am I just getting unlucky af? Everyone I talk to usually wires it to their headlight and I got mine to fuse box. 3 emblems crapped out on me and someone said checking the voltage it's getting before I attempt a fourth one. I'd really like to have a working emblem but I have no idea what keeps causing them to fail on me ☹️

[@SpeedCultureStudios]

@@Daniel-yf1li yeah wire it to the light itself

[@Joe-vr8yd]

I went to get this light from him he said 2018+ did you get it anyway??

[@SpeedCultureStudios]

He may not have these available

[@carbonebonnie1276]

how do i conmect phone to this i purchased but cant connect phone theres no app or anything

[@SpeedCultureStudios]

Check out my color changing led emblem install video. I show the app to use.

[@Jose.r47]

I don’t have the always on module but I do have the automatic headlights all the time... is there any way to have the emblem turn on with the same wiring because honestly I don’t even touch the light switches since I always have it on automatic mode... so would there be anyway to have it turn on at the same time the headlights turn on whenever it gets darker for the sensors to think it’s night?

[@SpeedCultureStudios]

I showed that in the video. It should be the pinkish gray wire.

[@Jose.r47]

@@SpeedCultureStudios so if I connect it to the same pink wire you connected yours it should turn on even if I have it on automatic mode?

[@Jose.r47]

@@SpeedCultureStudios not the same one you connected my bad, I meant the one you showed at the end will the emblem turn on when the headlights turn on after it gets to a certain point of darkness outside cause of the automatic headlight mode

[@SpeedCultureStudios]

@@Jose.r47 yes it will turn on when the auto head lights turn on

[@khoitran2347]

@@SpeedCultureStudios will it always pink and grey? I have the infiniti q60.

[@JaceWright03]

Yo bro do you know if the 14-17 would work with a 2020 infinity or is the wiring different. I’m having a hard time finding the light up emblem for my year

[@SpeedCultureStudios]

Different emblem

[@Finnegan6674]

Love the way it is a background light and is like a halo around the emblem. Great job!! I dont do IG is there a website or facebook page to contact him?

[@SpeedCultureStudios]

Yeah man he’s in all the Infiniti FB groups.

[@RajDaddyProductionz]

Awesome! Great video! I got one a while ago and did the ugly doorjam method. Been meaning to rewire it and connect it to the headlights. Plus the one I have bleeds. Definitely going to check out jaliscos ones and install it properly haha. Thanks for the video!

[@armaangrewal523]

Would this be the same on the 2020 q50?

[@SpeedCultureStudios]

No I believe they are different

[@ERICKITOMM10]

It’s looking really good !!

[@Okiee1234]

Do you have a link and instillation video for your front lip? Been looking for one for a while

[@SpeedCultureStudios]

kzbin.info/www/bejne/jYTSeoKOhtdsg9U

[@brokeboijd6983]

Will this work on the 2019 q50 I dont see a grey wire but I have the pink one I don't wanna fuck anything up

[@thaingo4764]

I installed mine but the emblem is not lighting up, any suggestions?

[@SpeedCultureStudios]

Make sure connection is good to power source and also make sure the ground wire has good contact and is tight.

[@thaingo4764]

@@SpeedCultureStudios I tried to ground using the screw keeping the filter in place but that’s a plastic unit. It seems everything around the area is plastic. Where can i ground?

[@SpeedCultureStudios]

@@thaingo4764 you can use the bolt holding the filter housing. The bottom is metal and you can use a washer on the top side to ensure a tight fit. I’m pretty sure I showed it in the video

[@stephonbessellieu2846]

Question, I did the connections just like you showed and the emblem worked. As I'm scrolling threw the app, changing light setting..it stops working. Suggestions?

[@lowmein3610]

Where did you get your led emblem from ?

[@SpeedCultureStudios]

In the description and in the video a number of times

[@dom11593]

Can this be used for the back emblem as well ?

[@SpeedCultureStudios]

It would have to be modified

[@thx1275]

No lol unless you really wanted to then you could modify it to make it work but it would highkey be ugly

[@TheLoner00]

Has anyone put it on a G35? I know you said it's the same as a G37 but I do realize there is minor differences with the two.

[@mistros5684]

What app and how did you connect it to the app?

[@SpeedCultureStudios]

Check out my RGB emblem install. This is not color changing so there is no app.

[@mistros5684]

@@SpeedCultureStudios forsure i just checked it out, awesome content!

[@tylerbrennen7997]

Good video with clear instructions. But (maybe I missed it) you should really disconnect your battery before doing this. Even thought it’s not high voltage. For your safety and everyone watching - you shouldn’t do live electrical work if you don’t absolutely have to

[@SpeedCultureStudios]

No need to disconnect the battery but if it makes you feel better, of course go for it.

[@jay_2168]

Where did you purchase that splitter ? 🤔

[@SpeedCultureStudios]

Amazon 3 piece for the 2018 non sport. Fits perfect. Check out my splitter video

[@Pray.to.0g]

Hey do you know the name of the app ?

[@SpeedCultureStudios]

LED lamp

[@hemingwayzydeak1234]

What the flat peace on the front bottom of the car that makes it look lower in the front what is that called ?

[@SpeedCultureStudios]

its called a front splitter.

[@hemingwayzydeak1234]

Speed Culture Studios thanks!

[@SpeedCultureStudios]

@@hemingwayzydeak1234 no problem!

[@rozay318]

Good vid bro. Would you be able to get a few shots at night?

[@SpeedCultureStudios]

There will be some in follow up videos for sure. Also check IG

[@andrewwatson6848]

Where did you purchase the emblem?

[@SpeedCultureStudios]

@jaliscos_carbonfiber on IG-mentioned one the opening 10 seconds of the video

[@TheSkull411]

Does the emblem light bleed at night?

[@carlosalejandro7315]

Same question

[@SpeedCultureStudios]

I really haven’t even looked at it at night yet. There was no bleed at dusk anyway

[@naturalliving8233]

Can i put this on my q40 ?

[@SpeedCultureStudios]

I would imagine they are slightly different

[@virtuallyrs3673]

What’s the app called for the control ?

[@SpeedCultureStudios]

Does not correspond with this emblem. Check out my RGB emblem video. I show the app in that one

[@abdullghoriO1]

can i put this on my ‘17 q60rs?

[@SpeedCultureStudios]

Confirm with Jaliscos

[@Lucifer_MS_666]

I’m curious does the Q 50 for the 2015 version does it come already with a wire pre-set or do I have to like manually re-wire to get that emblem to turn on if I were to get it?

[@SpeedCultureStudios]

The car in the video is a 2015. So same process

[@FrijoleroSamurai]

Dude I dunno why but trying to remove the headlight bulb wiring from the socket is insane right now.

[@SpeedCultureStudios]

It’s tough actually

[@FrijoleroSamurai]

@@SpeedCultureStudios so i ended up taking out. It’s Just there to hold it in place. No actual bulb. I think the 2018 model might have a different harness cuz I’m not seeing the same things.

[@Blue.Q60]

hey speed, do you know if this fits a 17' Q60?

[@SpeedCultureStudios]

I think they are different

[@Blue.Q60]

@@SpeedCultureStudios the one I ordered from jaliscos says it fits from ‘14-17’ q50 and q60 based on a review, thanks for the vid helped me understand the wiring a lot easier

[@SpeedCultureStudios]

@@Blue.Q60 I thought the Q60 grill was different, but maybe the emblem was the same. If jaliscos has the years listed, I'd believe him. Glad the video helped!

[@christianaleman4719]

Subscribed! Great work buddy! Whats the name of the track at the end?

[@SpeedCultureStudios]

Thank you! I’d have to look at the music-it’s actually just a free track from the KZbin studio

[@joseboyer9710]

@streetculturestudios can I put this on my 2012 g37 coupe ?

[@SpeedCultureStudios]

Not this one, no.

[@KevinSmith-zb1nn]

I def appreciate this video. Saved, liked and subscribed.

[@SpeedCultureStudios]

I really appreciate that!! Glad it helped’

[@nycsammy3113]

How can I change the color ?

[@SpeedCultureStudios]

This particular one is not color changing but the rgb emblems connect to an app. I have a video on that as well!

[@zackhannah9521]

Is the pink wire the same for a 2015 Q50 premium?? Did all of this, but accidentally think I spliced into the wrong wire!

[@SpeedCultureStudios]

Should be the same.

[@zackhannah9521]

@@SpeedCultureStudios weird. I spliced the “correct” one and no results. Do I need to plug the harness back in before I see results from the emblem?

[@SpeedCultureStudios]

@@zackhannah9521 The wires from the emblem are very small. It is possible you aren't getting a good connection.

[@zackhannah9521]

@@SpeedCultureStudios ahhh I see. Should I just remove some of the rubber shell and just put more exposed wire into the splicer?

[@SpeedCultureStudios]

@@zackhannah9521 I would try that first, yes!

[@101mg]

emblem is kick ass, how much?

[@SpeedCultureStudios]

Under $150 I believe, but he’s always running deals or combo packs, so worth checking out!

[@DatBoiiBlesseD.361]

U have a link? Looks good💯

[@SpeedCultureStudios]

No link. Need to check out jaliscos_carbonfiber on IG

[@timhuntee9194]

Can you put this on g37 coupe?

[@SpeedCultureStudios]

I think they are different but he may have some available

[@juanrenteria4585]

Do you have the link where to get the emblem?

[@SpeedCultureStudios]

Details were shared in the video and in the description

[@jongutierrez6883]

Can anyone help me figure out after installing my right led blinker won’t work

[@SpeedCultureStudios]

You must have severed a wire.

[@joey_maldonado]

I’m having a hard time taking off the harness

[@SpeedCultureStudios]

Yeah it's kind of a bitch lol

[@joey_maldonado]

I got it off

[@joey_maldonado]

@@SpeedCultureStudios thanks

[@Not_Too_Sweet]

I'm curious if this would fit a '19 qx50?

[@SpeedCultureStudios]

I do not think this particular one does, but I believe there are some available now for that year. Check jaliscoscarbonfiber.com

[@bn4241]

Yo J. You're late. Just kidding. Keep up the good content. I can see you're making it big one day! As for the LED emblem, I have it gloss black too; glowing red. It's bleeding more than a girl's period. But who cares 😂

[@SpeedCultureStudios]

Oooh dang lol