How to install Infiniti Q50 rear sequential signals (without the pigtail)

[@SuperTrickster2010]

Thank you so much for this video! Saved me a bunch of headache 🙌🏻

[@Foxcraze]

Glad you found it helpful!!

[@iberrodriguez6486]

Installed in the middle of hurricane, good video 👌

[@Foxcraze]

Sweet, glad it helped

[@Headnsouth]

Great video, straight to the point.

[@Foxcraze]

I appreciate that! On occasion I tend to talk a bit but I am able to keep it short at times haha

[@Headnsouth]

@Foxcraze I was more intimidated by tearing out the trim. Removing trim was easy, especially with plastic trim tools. Couple of bucks on Amazon . Now that I have the trunk pretty much empty, I'm interested in checking out your soundproofing in the trunk. Love my Q but it's a bit noisy.

[@bannyvongphachanh8052]

While signaling and pressing brake light do they still have the turn signal functioning I notice mine stops the turn signal when I press brake and signaling at the same time I thought he turn signal will keep functioning when I step on the brake

[@the7cantlose]

Great video. Perfect instructions. Thanks for sharing!

[@Foxcraze]

No problem, have a good one!!

[@osielrodriguez5106]

ur video help me a lot I really appreciate it, just a quick question, I want to install a diffuser with a third brake light can I connect it to the sequential wire too? Or what should i do? because I already installed the rear sequential lights, thanks 🙏

[@Foxcraze]

Yeah I see no reason why you can’t tap into the sequential lights. They are also a low wattage and should be just fine!

[@Montoya.Sergio]

Quick question. I installed them correctly but the right side , the indicator is blinking rapidly when the yield lights are on but on the left has the perfect animation. What could be the issue ?

[@Captainscrim59]

really good video very easy to follow thanks for the help

[@Foxcraze]

Glad it helped!

[@spadds]

This is just what I was after. I've had the lights for nearly a year but not installed them as I wasn't sure how the electrical connectors went! Thanks (I just hope my terminals are the same!!)

[@Foxcraze]

Real glad it was helpful. Your tail light harness will be identical but if your sequential wires are a different color than mine trial and error will solve the sequence fairly quick!

[@yaseen-q50]

Hey brother I just want to say thank you, after watching your video it made so clear to instal mine.

[@Foxcraze]

Glad it helped man!!

[@InfiniteImp42]

Good video, thanks for doing it! I'm thinking of doing this on my 2015 Q50. Someone below mentioned that when the brake light is on, it overrides the turn signal. Meaning if you are standing on the brake while a turn signal is on, there is no sequential. What does yours do?

[@Foxcraze]

So I tested this theory and you are correct; if the brake is applied the sequential goes solid as a brake light while the stock turn signal continues to flash.

[@InfiniteImp42]

@@Foxcraze Thanks for checking, appreciate it.

[@acm_1028]

Mine came with pins but the wires were about 2 feet so I drilled some small holes in the trunk

[@Foxcraze]

Dang haven’t seen a set with such short wires, but at least you worked it out! Did you put any grommets on the drilled holes so the cut metal doesn’t wear into the wires?

[@frankies9049]

I did my like that but when my light is on my turn signal light don’t light up to the left only stay on read do you have the same problem? Where my lights is off It work just like yours

[@Foxcraze]

No mine work correctly in every setting. I would recheck the plug/ wiring. you might have two wires or pins touching somehow. If that’s not the case and it done that since day 1 then it might be a defect in the circuit board itself.

[@frankies9049]

@@Foxcraze thanks I will check my again God bless you brother

[@Foxcraze]

Have a great one man, and good luck!

[@guccigangsters6922]

@@frankies9049did you find the problem? mine when my lights are on red turn signals don’t work but when my lights are off turn signal works

[@BRYAN-uh7ge]

What's the name if the tool you used to trim the plastic?

[@Foxcraze]

I used a Dremel3000 with a drum sanding bit. Any brand rotary tool will get the job done though just adjust the speed so it sands the plastic and doesn’t melt it in the process.

[@eh1354]

Do you have to trim the edges or do you think I’ll be fine?

[@Foxcraze]

They will fit untrimmed but will be less flush and might be touching the paint in some places.

[@matthewpelletier5264]

You still going to do the widebody kit???

[@Foxcraze]

Yeah I’m doing it this fall, I know how I’m gonna do it and will be ready to commit the time. I’m out of the country till then.

[@matthewpelletier5264]

@@Foxcraze sweet! Can’t wait to see more progress. Wanting to do the same to my car so I keep checking back to see if there was and update on yours lol. Good luck!

[@Foxcraze]

Yeah man, driving the car daily to work just wasn’t conducive to getting anything accomplished on it. I’m gonna take leave and get it done in waves. Since the kit is on other Q’s already I needed to find away to make mine unique and be different. I got that planned out now.

[@NismoQ50]

Hey when I turn my car on the sequentials don’t work, but work when car is of and in place. any reason why?

[@Foxcraze]

Don’t work as in no blinkers, no drl or something specific isn’t working? What features work when the car is in auxiliary mode?

[@Marrda]

My right one on 3 sets so far keeps burning out one led in the middle

[@Marrda]

Also I have the tail as turn module in as well. Not sure if thats the cause but then again my left one doesn't do it

[@Foxcraze]

Damn I will be on watch for that then, thanks! Def weird that it’s the same side every time.

[@Kevin-de3qc]

I have a 2018 sport and they don’t have lights on the rear bumper can I still have these installed?

[@Foxcraze]

Unfortunately no, these require the holes from the 1st gen bumper to be mounted.

[@djspeed78]

Lifesaver!

[@Foxcraze]

Glad it helped!

[@joedano5749]

great video !

[@Foxcraze]

Thank you!

[@super0snake1]

Thank you

[@Foxcraze]

No problem!

[@SuperCapljinac]

Great video, very detailed,thank you for sharing

[@Foxcraze]

No problem, thanks for watching!

[@selimyagmur454]

You’re legend

[@Foxcraze]

Appreciate it!!

[@yannaroberts8624]

Was your tail lights on auto or off?

[@Foxcraze]

I believe I had them set to auto and due to the brightness outside they just weren’t on. Why do you ask?

[@yannaroberts8624]

@@Foxcraze I plan on getting the rear bumper lights also. I've seen some videos where they stay on and some videos when they don't. I rather it not stay on and be a suprise lol.

[@Foxcraze]

Oh, lol in that case the answer is if the lights are set to auto or on then they will be on but if set to off then only the sequential and brake application will function.

[@DREAMSUPPORT365]

Nice content

[@Foxcraze]

Thank you, I appreciate that!

[@billydabz4247]

So did you never install the wide body? Lol

[@Foxcraze]

I have talked about it here and there that I didn’t have the ability to have the car down while it happens and it be driven daily as it needed to be. I still plan to install it this year but I’m deployed till the fall and have been uploading footage recorded over a couple months leading up to me shipping out. Being military with a family and other obligations doesn’t give me massive amounts of free time.

[@joshdelgado00]

@@Foxcraze where are u stationed?

[@Foxcraze]

I’m stationed at Fort Bragg brother.

[@-TheNinjaYaLuv2Hate-]

Looks stupid without the tails being sequential

[@Foxcraze]

Cool story bro, thanks for letting me know.