Infiniti QX70(FX37) Front Bumper Removal: DIY

How to remove the front bumper of a qx70 or fx37. Simple and quick DIY.

[@2ndhansmok147]

Just what I needed to see. Thanks for the Video.

[@Gymjb5]

Thank you 😊

[@alphaautoadventures]

Thanks for watching

[@theroyboys2]

Nicely done!

[@andrewmarley6681]

Really cool video, done to perfection. I am interested in seeing how to disassembled the front camera that's in the grille. You did not show that, any way you could drop something on the wiring to the camera, that would be cool.

[@alphaautoadventures]

Hi thanks for watching. I believe there were 3 or 4 small screws holding it to the grill front the inside. And the wires just unclip. I would do it but I no longer have the vehicle.

[@crod6431]

I believe whenever you disconnect the front camera, you'll have to have it recalibrated. Unless you can do it yourself, an Infiniti Dealer will charge about $400.

[@darrylbrown7043]

Are you replacing the headlamp?

[@DTUFINOPhotography]

My driver side headlight assembly is not sitting flush and has some place (you can push in) as if its supposed to be clipped to comething but its not. Can you tell me where and how i can access that area? just want to make sure the headlight doesnt fall off on me.

[@alphaautoadventures]

Thanks for watching, if I remember correctly, the headlight assembly has plastic alignment pins that should ne utilized before screwing them down. I don't remember if the bumper has to be removed to access them.

[@DTUFINOPhotography]

@@alphaautoadventures I'll have a look tomorrow morning.

[@sergiogonzalez973]

Is it the same way for removal on a 2008 fx35?

[@alphaautoadventures]

Not sure. But probably similar