Inflatable Boat Customization For Fishing

[@m.t.pockets2215]

Great job. The thing I like most is there isn’t much room for another person, but I can take my dog with me. Peace and quiet at last.

[@Fishing_Fables]

Thank you so much!!! yes totally agreed :)

[@yewlingchan465]

Love your set up, very similar to my set up, I have a 12 foot Seamax Ocean which I modify with 2 free standing seats, big front cooler with rod holders (3 on one side and 2 the other side due to the lack of space). Put a newer fuel injected 20 horse mercury (the 15 and 20 hp weight only around 100 lbs, lightest in the market) on it and it easily go over 20 mph with 2 person and fishing gear. Full size Bimini, fish finder etc, Inflate/deflate for 2 years, finally give in and bought the smallest trailer and modify that to fit the inflatable, weight of boat plus full fishing and camping gear even included trailer less than 1000lb, very easy to tow, now 2 more days of enjoying fishing instead of packing and unpacking the set up, I am a late 60s senior so less work better, funny everything seems heavier the older I get, now I am seriously considering buying a second smaller inflatable boat no more than 10 foot with air floor and just go fishing a day or 2, the bigger set up is for trip 7 days or longer, I have a 2.3 hp air cool Honda outboard that I use as a kicker will be more than enough to push boat around. I grow up by the ocean so having a boat of any kind going camping is a must. I plan to get a cargo tray so I can haul the pack up boat and motor around behind the vehicle, I love modifying, like to share my ideas with others but never have the nerve yet to do a video, So I do enjoy watching others on utube Like to see you put out more videos relate to your boat and fishing outing with it, thanks

[@Fishing_Fables]

Thank you for sharing! I love the description of your boat setup! that sounds amazing and 20hp motor sounds so nice! But I definitely understand that the more you modify and more you put on the heavier it gets and takes longer time to setup and actually enjoy. I think I'm at a point where I"m trying to find that balance so it doesn't take a whole day to setup and still have enough time and energy to enjoy without stressing about packing up after :) I think for the purpose of what i'm trying to do, yes I don't think I'd make anything heavier for sure since I want to pack all in my prius and able to save as much storage room as I can, maybe I'll try to upgrade the motor with fuel injection since it's a pain to keep putting in gasoline in middle of your trip. But overall I love modifying too plus love fishing so i'll continue to find a way to make things better! Thank you so much for your support and I wish I continue hear from you on your journey as well. I'll continue to upload more videos too!

[@tom23r1]

Sieht super aus. Alles dabei was man braucht 💪👍

[@x3douba3]

Awesome set up, I really like the way you mount the transducer

[@Fishing_Fables]

Thank you!!!

[@jbreefer148]

I love the Saturn boat. I have the 13' SD 385 version, and it's awesome.

[@Fishing_Fables]

Thank you! 13' SD must be nice!

[@wilbobblehead2219]

Love your setup 👍👍

[@Fishing_Fables]

thank you!

[@dayliving2020]

I have cb330, plenty of videos on my channel using it in ocean fishing with 6hp tohatsu. I customized rod holders, using HDS live 7

[@marky3296]

Question: how do you attach the anchor rope to thd boat?

[@tayspresso]

are we going fishing this Sat bro?

[@BunkerBlog]

I'm going to be buying the exact same boat soon, was wondering if you could give me some advice. I will primarily be fishing with 2 people, both in rivers and back bays, is a 5 horsepower outboard enough power? I see you run a 3.5 but I'm concerned that with 2 people + gear it won't be enough to fight against current. I'm pretty big and tall guy so I know that is a factor.

[@kingofmonsters2063]

How far would go offshore in an inflatable how many miles?

[@dayliving2020]

this is a major flaw, when your left paddle is disengaged, i had issues with my motor in ocean where motor died on me, and would not start, you would have to paddle in, i see that your left paddle is not existen due to fish finder, you cannot trade your paddle for your transducer, trust me it is very dangerous, its dangerous when you're in ocean,

[@vincentnieto7792]

I guess he could always use the trolling motor to get back home. Hopefully the battery has enough juice.

[@Fishing_Fables]

yes agreed, I do have the left paddle on the boat just in case and I can take the tranducer out and am able to put the paddle back on. But yes as @vincentnieto7792 mentioned, I do rely on my trolling motor when outboard fails.

[@Fishing_Fables]

Yes, i normally don't use the trolling motor much in case of outboard motor failure, thanks for the reply on this!

[@vincentnieto7792]

I get that you go out in the morning when it’s calm. And you could reach all the way to the wall. But what do you do when a big boat comes passing your way and makes a huge wake. It seems like it would be very scary. Because I take my bass boat out to Long Beach Harbor and I could barely handle the wakes.

[@Fishing_Fables]

Yea also not the big fan of those waves but I usually position the boat diagonally to the waves to reduce the impact as much as I can :) I mean can’t really do much tbh other than just enjoy the ride

[@DAYVIETGOLD]

Nice setup, how do you get the boat around? I noticed you had some wheels but they weren't transom wheels connected to the back?

[@Fishing_Fables]

I have a small set of wheels that i use for kayak and i use that for this dingy as well. Here is the link! www.amazon.com/VEVOR-Capacity-Foldable-Aluminum-Paddleboard/dp/B0C2CJ5RTC/ref=sr_1_4_sspa?crid=1P8R4YOBHGP19&dib=eyJ2IjoiMSJ9.Y8shL3RP__i1_B-1e64SurhJNYsojmiYAdf4dHVyMiBs4x8NZn9Wj_K-K6DK9-xth2smyysRHhBh_vruqy6qHKL8PU5O-rX68fgK_RfxNa0vp7zJL3C_oUxGhm-JSSgO13StkAU3XeJOWlPQTM2YO-NWzRrW-eindneEyqk0e2_tnMSt8JjSeJ8xMMDl5wlj9ivMeuf4U09yQq-jhuVVwX2DzRWvVfHuCSIvpuK12FrzdtXOxqqsSn52QYs9mFv8QHLFqwmoXG9L4oYGXGmiiEV_U7of7pNNB629z_ooiKY.tZSQO-rA0FiNa3MEejmUkUJhPKX6RJS1HffjkRzN87s&dib_tag=se&keywords=kayak+wheels&qid=1713449433&sprefix=kayak+wheels%2Caps%2C145&sr=8-4-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

[@alexcain6726]

How fast are you able to go with the motor and also how far out do you normally go, just asking because I’m planning on getting a dinghy the same size and figuring out the right motor is pretty hard

[@Fishing_Fables]

that can be tough for sure, i did upgrade my 3.5HP motor to 5HP by switching out the carburetor so it did increase the speed a bit, when I tested it out without any gears it went about 11 mph and with gears and another person, maybe around 7MPH. I do wish I invested a lil more to get higher HP around 10 or 15HP motor to get up to 15 or 20MPH but for my use, it does the job. I usually go out about 1-3 miles out and it takes me about 10-30 mins max. Motor isn't cheap too so not easy to invest but if you can, I'd go with the highest HP you can since it'll be much easier to handle with gasoline and if you get 12ft boat, it can handle 10-15HP motor easily as well.

[@tylermarrin1303]

Thanks for the vid and for the other where you compare vs SD. For CB, is there anyway to strap something to the floor of the boat so it doesnt move? Like a cooler to sit on

[@Fishing_Fables]

Thank you!!! There really isn’t a way, probably just need to tie it to each side of the rope so it won’t move

[@Fishing_Fables]

Sorry for the late response!

[@jonwhiteley5651]

yes, they’re actually is a very easy way. I have a boat similar to this I bought a couple of 9 foot NRS tiedown straps. You just make it into a giant loop and put it around the air floor before you inflated all the way and then you can use it to it hold things down to your floor or you can just attach things to the strap that’s going across your floor.

[@JorgeRodriguez-db9tk]

Hi, can you tell me more about how to increase the power in the Tohatsu motor? Also where you got the aluminum propeller and blades pitch. thanks

[@Fishing_Fables]

Yes, please see this link, this is the kit i used to do both! www.readysetboat.com/mercury-3-and-a-half-hp-to-5hp-upgrade-kit-carburetor-and-propeller.html?gad_source=1&gclid=Cj0KCQjwiYOxBhC5ARIsAIvdH50LfmCWrrDl2FPrUA2PA3Fw7zF9PAYAgNap_0j63-Fs6dQSEo1Tk-UaAvreEALw_wcB Also I watched some youtube videos to actually do it, it's fairly easy kzbin.info/www/bejne/omXWY5lul62VgaM

[@Fishing_Fables]

And just FYI, I've never done this or opened up the engine before ever so if I could do it, I'm confident anybody can

[@donaldmartin4620]

Ya I just bought the 16 ft Saturn inflatbe boat bog says it’s heavy duty doesn look like it tho not sure says it heat welded to came FedEx it has some little scratches on the tibes kist wondering what I paid for it 2000 dollars should I worry or are the big tibes strong as I fish the ocean don’t see any leaks kist aciff marks but look great don’t know if the aluminum seats can hold my 245 pounds tho lol but hope so what do you think about Saturn boat so I know not to shure about there boats I know you got the cheaper one tho

[@Fishing_Fables]

nice getting a 16ft! I hope you're having fun with it, for 16ft, that should easily hold your weight for sure in my opinion. overall, I think saturn is great brand, the one i have is def more for just cruising around, it's not for the heavy duty fishing boat for sure, it wasn't made for that. I think if you spend 2000 or more, you're getting thicking heavier material that could endure more overall, also great performance wise. I think scratches wouldn't be too much of an issues but would be good to check for air leak using mixed water with soap and spray around so you can see if there is bubble forming.

[@bolingbroke92]

Great build! One question, how did you mount the wheels ?

[@Fishing_Fables]

Thanks! I did not mount the wheels actually that’s just one of those wheels u can put under the kayak or inflatable for transportation

[@DAYVIETGOLD]

Do you have a link to what it looks like? How have you found using it as a trolley to move it around? I'm trying to figure out how I move mine around by myself after having all my gear on it

[@xykkkk]

great setup! how do you transport the boat? using a trailer or inflate & deflate every trip? thank you

[@Fishing_Fables]

Thank you! Yes, I do inflate and deflate every trip as I don't have a space for a trailer in the garage. Hopefully someday I'll have one! :) Luckly this whole setup can fit in my little prius with the hatch back.

[@xykkkk]

@@Fishing_Fables I used to inflate/deflate every time. but now I put my inflatable boat on the roof rack of a minivan. I have to choose a 10 feet inflatable boat to limit the weight and length. It's a good idea to hold everything using milk cradles. 👍

[@Fishing_Fables]

@@xykkkk I love that, I put it on top of my prius too for a few times but I wasn't able to get to freeway going more than 60 mph so just kept inflate and deflate haha. But for sure, love mild cradles

[@Moreoxtail]

Does the trolling motor ever get in your way? Was thinking about getting one but don't want to over crowd the transom.

[@Fishing_Fables]

For the most part, it doesn’t get in the way since I can fold the steering handle down or put in position where outboard motors steering handle won’t hit it but if u happen to turn fast and trying to go in different direction quickly it can get in the way. For example if I want to reverse, I’d need to turn my motors 180 degree to steer, but I’d need to turn outboard motor the opposite way and fold the steering handle up to not hit the trolling motor. But then I’m almost never in situation I need to reverse or turn fast so it getting in the way isn’t the issue.

[@Fishing_Fables]

So I have the outboard motor right in middle and trolling on the right side of it but u can move the outboard motor a lil to left to give them a lil more room between. I feel I’m able to now easily Tetris both so they don’t get in the way :)

[@mr.random8447]

No Anchor mount retrieval/lock system

[@allanubaldo2838]

Do the chairs ever cause aluminum seat to come off?

[@Fishing_Fables]

No I don't ever have issues of it coming off, it does rock back and forth so I put milk carts on the bottom so it sits on the bottom of the aluminum to stay flat and not move

[@leesarson2853]

very nice

[@Fishing_Fables]

Thank you so much!!

[@svitlanabal8323]

HI, I would like to buy chair for boat like yours. Can you explain me where I can buy it?

[@Fishing_Fables]

So I created the chair myself by buying the swivel and then wood to put the chair on. The chair is a cheap one from Dick's sporting good, I put that chair on a piece of wood and then drill into the swivel that I drilled straight into the aluminum seat that came with the boat. I can give you more details if you want. I think if you want to just buy it, it's a little more expensive but def more comfortable :) let me know!

[@christopherhoxie7568]

How do you secure the gas can and battery?

[@Fishing_Fables]

I have the gas under the seat in the milk cart that's supporting my seat, and the battery is in the back corner as well! trying to save space as much as i can!

[@brokeguyshomestead6227]

how do you not get holes in the bottom when going over sticks

[@Fishing_Fables]

Sometimes I accidentally go on shallow water and go over a rock and get holes for sure so I have to patch it up using glue and patch kit, I have two patches on the bottom :)

[@Fishing_Fables]

You just need to be careful not to go over shallow areas or somewhere near sharp edges

[@samirelsakka298]

the chair ! where do you get it from and how do you make it roll ? That's actually very interesting ! thank you

[@Fishing_Fables]

Thanks for asking! I bought two folding chairs from dicks sporting goods that you put on a bleacher and I actually tied a piece of wood to the bottom of the chair and drilled in the swivel to the bottom of the wood. Then I drilled in the other side of the swivel, into the aluminum chair on the boat. Here are the chairs and swivels i got for you to check out. -- Swivel www.amazon.com/gp/product/B09KNRRTP3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 --Chair www.dickssportinggoods.com/p/dicks-sporting-goods-stadium-seat-16dsgudsgstdmstxxodr/16dsgudsgstdmstxxodr

[@codyakfishing8856]

How has that boat held up so far?? I have an intex mariner 4 and lookong to upgrade on a budget... Any leaks? Gokd stability etc...

[@Fishing_Fables]

it's been good, I've had a leak that i patched up not too long after i got the boat which was my fault but it's been good since and going about a year without any issues. It's surprisingly durable for sure, i try to maintain it fairly good, like washing it down after each use with freshwater and drying it before folding it back up, running the motor to get gasoline out so no residue inside etc.

[@codyakfishing8856]

Nice, I'm convinced and just might buy one soon

[@codyakfishing8856]

Oh and how difficult is it to repair a leak?? Did u use the included kit??

[@Fishing_Fables]

@@codyakfishing8856 Yup I used the repair kit that was included and just followed one of youtube video on how to fix leaky inflatable, pretty simple just need to make sure it's cleaned before applying with multiple layers of glue so it's completely covered and def need overnight drying before inflating again

[@Fishing_Fables]

@@codyakfishing8856 i think i followed this video if you're interested kzbin.info/www/bejne/kKHMfZ2Mf8t8p8k

[@cowboysnation1594]

How do you like the cooler there? I was thinking of putting it in the middle. I was thinking of putting replaceable holding chairsz

[@Fishing_Fables]

For sure! I mean I think if i'm going alone, I can put something heavy in the cooler to balance out the weight so i do like that position there but if I can have smaller one, I'd rather have it close to me when i'm using the motor in the back for sure. I'd like to be able to easily replace chairs too and hopefully more comfortable. This is an okay set up but it can get uncomfortable if you are on the water for a long time.

[@unlimitedj06]

👏👏👏👏👍👍👍👍

[@Fishing_Fables]

Thank you!

[@dayliving2020]

where do you live? maybe we can go fishing together:)

[@Fishing_Fables]

I'm in socal! and thanks for the invitation!

[@bmarques9767]

5*

[@Fishing_Fables]

Thank you!!!

[@tomtom9922]

This is badass

[@Fishing_Fables]

Thank you!

[@tokyoknight6676]

How do you secure the box to the boat?

[@Fishing_Fables]

Thanks for your question, which box are you referring to? the ice box or milk cart box (black) or the fish finder box?

[@tokyoknight6676]

The rod holder box

[@Fishing_Fables]

@@tokyoknight6676 I see, sure I'm just using an ice box and that just fits perfectly in front of the boat, I'm not using anything to secure the ice box. I usually have stuff inside the box so it's heavier and I dont need to hold it down or tie to anything