Inflated Applique

[@BoricuaSewingCrafts]

That makes sense. Thanks! I will try again!

[@noplacelikehome9116]

Cute! I can think of a million uses for this. Thanks for sharing.

[@betsybobkaitis7291]

Thanks Lisa! This was perfect timing for me!

[@darceyday5410]

Excellent, you are so very good at this, I am learning so much....Thank you

[@marciamiddleton9727]

Thank you! Very helpful!

[@suevarner8175]

Thank you Lisa. I am going to make a sweatshirt.

[@jackiekraemer596]

great explanation lisa

[@lynnosullivan1754]

I just have to bite the bullet and get Enthusiast and SA1. Been sitting on the fence long enough.

[@traceyjones6220]

You can do this on the Babylock Solaris without enthusiast

[@larsmitty]

@@traceyjones6220 How would you do that. I have the Luminaire by Brother

[@cynthiasmith6527]

Is it possible to add a satin stitch on the outer edge?

[@Embrilliance]

You can choose any stitch type you want. Have fun!

[@sarahelffers9466]

Which one would result in satin stitch: single, double, bean, chain, backstitch, stem, sashiko?@@Embrilliance

[@Embrilliance]

@@sarahelffers9466 satin border

[@Embrilliance]

@@sarahelffers9466 be sure to read the pdf manual on StitchArtist to become familiar with the stitch types available to you. There are control videos for each stitch type on our StitchArtist playlist!

[@BoricuaSewingCrafts]

The short cut you describe in selecting all the nodes and right clicking to Mae them curve nodes doesn't work. Is there another button you need to press to do this. You discuss this at 10:23 of the video. When I right click I got a copy button. Did you skip a step?

[@Embrilliance]

Need to select nodes then right click on a node. If you get a different menu you aren’t on a node.

[@BoricuaSewingCrafts]

I GOT IT I GOT IT!!!!! Thank you soooooo much!!!!!

[@danielsabh]

excellent content

[@JoyceCabral-e2s]

Love it, thank you. You mentioned using scan n cut…. How did you do that?

[@Embrilliance]

Check out video #6 on our quick tip playlist.

[@JoyceCabral-e2s]

Thank you!

[@janicesilverstein5294]

Great video, Lisa. However, I was a little confused when you opened the Inflate diaglog box. you said it was a function of Embrilliance Enthusiast. Mine is only the Knockdown diaglog box and only allows me to go up to 2.0mm. It that a function of Stitch Artist 3 instead of Enthusiast?

[@Embrilliance]

No the process was done in Enthusiast Http://embrilliance.com/contact-us-2

[@Spring_Flowerrrrs]

Right. She mentioned this could be done in Level 1 but the feature is in a totally separate suite- Enthusiast. So aggy

[@Embrilliance]

@@Spring_Flowerrrrs draw with points to create the same shape in level 1

[@otterfan5518]

Hi Lisa, I so enjoy your teaching. Was able to be with you in person in Biloxi this past April, so much fun! Is it possible to create a “offset” so to speak if I want a monogram that is a block letter center with script initials on top? I would like there to be them slightest space around the script letters so that they don’t sit right on top of the block font. I hope that makes sense. I have a pic of what I want to do, just don’t know how to insert it here. I have Essentials thru Stitch Artist 1. Thanks so much!

[@Embrilliance]

@@otterfan5518 not sure but check out our project blog to see if this is what you are asking embrilliance.com/archives/168516 If not, please ask on the website as they are better suited to provide direction!

[@jenniferhancock-zf7cq]

Hi question. I have stitch artist 1. If I just need to upgrade to level two. Is it still the $380?! Or is it less as it’s an upgrade?

[@Embrilliance]

@@jenniferhancock-zf7cq it’s the price difference as shown on our website! embrilliance.com/store?add-to-cart=4206

[@CynthiaMelvin-m2t]

Is there one embrillance program that will do this are what programs do you have to have please

[@Embrilliance]

@@CynthiaMelvin-m2t The process is similar to creating the name keyfobs - so you only need StitchArtist L1 with your favorite BX font or design. However, if you have Enthusiast and StitchArtist L1 this project can be done in a few minutes! This video shows the quick and easy process so you can be stitching in 15 minutes or less!

[@katherine5587]

Should this work the same way if I have 2 words that are stacked on top of each other? I am trying it and the result of the underlay is not covering both words. Thank you 😀

[@Embrilliance]

@@katherine5587 hard to guess what you are saying. Maybe send your file to support and ask them to explain! Http://embrilliance.com/contact-us-2

[@katherine5587]

I think I figured it out!

[@shannonwinkler8524]

Do you need both software modules to make this effect?

[@Embrilliance]

This video shows a technique using the Knockdown shape of Enthusiast and using StitchArtist to assign new stitch properties. Alternately you could create the shape using draw with points of StitchArtist. StitchArtist is required, Enthusiast provides a shortcut.

[@felarios8583]

Si do that functions work on stitch Artist 3?? Because mine doesn’t have inflate, I’m still learning 🙄

[@Embrilliance]

Sounds like you should reach out to support to find out what you have and make sure all is working as it should. StitchArtist L3 is not shown in this video so KZbin is not the best place to get the answers you need. Http://embrilliance.com/contact-us-2

[@KR-1980]

Can you create the Applique in stitch artist 3 alone?

[@Embrilliance]

@@KR-1980 yes! Follow the steps from our bubble name keyfob video! In short - draw with points(easiest & fastest) OR use the graphical operators to outline stitches, inflate and union as shown in the video on keyfobs.

[@kimredding30]

I have 2 questions. Can I use a satin stitch for my finished stitch? Second when I lasso all the nodes and rt click it doesn't give me the curve mode. Gives me paste and a few other things. Thanks

[@Embrilliance]

Yes on satin. Best way to get support is on the website. Http://embrilliance.com/contact-us-2

[@kimredding30]

Thank you

[@Miss-Laine]

Is there a way to add automatic stop after applique placement in the software? not color change but full stop so when I go to machine the hand showing that machine will stop is there. I have Baby lock valiant.

[@Embrilliance]

Use the brother thread palette and the applique colors for each appropriate step.

[@cynthiasmith6527]

Would an appliqué font work for dog mom instead of a fill font? If so are there extra steps?

[@Embrilliance]

Would work the same! Even works for a design not lettering!

[@cynthiasmith6527]

Would there not be added steps?

[@Embrilliance]

@@cynthiasmith6527 why would it have extra steps? You should give it a try!

[@designedwithlove617]

Hello @Lisa Shaw I have a few BX fonts I bought that I would like to change the location of the jump stich from letter to letter. Can I do that in any of the Embrilliance software?

[@Embrilliance]

Stitch based BX fonts are basically designs mapped to the keyboard. So there is no automatic way to reconnect the stitches. You could possibly use the stitch editing function of Enthusiast to add individual stitches to travel from the end of one letter to the start of the next. See our stitch editing videos on our Enthusiast playlist

[@mebabejo2050]

Hello, I need help finding the knockdown stitches because they are not where you have them in the video. appreciate your help. Thank you

[@Embrilliance]

Be sure that you have your Enthusiast number added. Please contact support if you need assistance. Http://embrilliance.com/contact-us-2

[@brendajunkins8433]

I have an 8x8 hoop as my largest regular hoop, but also have a 8x14 flip, or repositional hoop...will this design, "DogMom" with the inflated raw applique work with my flip hoop?

[@Embrilliance]

There is a video on creating the split hoop template on the Enthusiast playlist. Think about splitting a single large applique…not an easy clear cut project.

[@peggybarnhill7044]

Lisa...How would I do a two line inflated applique?...so it will capture both lines in one ...if that makes sense.....I typed in the two lines but when it did the knockdown....it separated them....help!

[@Embrilliance]

Your design elements need to be closer together. Be sure to watch the various Knockdown videos on the Enthusiast playlist.

[@syltoy2745]

So to do this DogMom you have to have Stitch Artist 1, Enthusiast & Essentials?

[@Embrilliance]

To create following the steps in this video, yes. You can draw with points to create your bubble if you just have StitchArtist.

[@jessicamoreno3952]

New to all of this are all of these fonts available with stitchartist 1?

[@Embrilliance]

StitchArtist comes with Block font. The font used in this project is linked in the description There is a great overview video as well as beginner info on this page. www.Embrilliance.com/start

[@brendafogerty1685]

What level of stitch artist is needed to accomplish this technique? Can it be done with level 1?

[@Embrilliance]

Yes you can do this in level 1. Be sure to watch the video a couple times to become familiar with how easy the process is!

[@brendafogerty1685]

@@Embrilliance ok. Ty. I need to verify that I have enthusiast and not just essentials.

[@jeannie55]

I am struggling with this program. I cannot get my fonts to load in Embrillance.

[@Embrilliance]

Tech support is available on the Embrilliance website. Http://embrilliance.com/contact-us-2 They answer every question and you can even log in to see the conversation from any device.

[@enyc14]

Great video, however I wish it wasn't so blurry :(

[@Embrilliance]

Check your resolution on KZbin. Should be at the bottom of the video