INGCO Rotary Hammer | Unboxing and Review of INGCO Rotary Hammer RGH9028-2 | RGH9028-2

INGCO Rotary Hammer | Unboxing and Review of INGCO Rotary Hammer RGH9028-2 | RGH9028-2 | Power Tools

Рет қаралды 48,344

Anthony Mawuli Amlalo

Күн бұрын

Пікірлер: 38

@mikhan5554 2 жыл бұрын

Tthis is the best drill. Very good designed . please export in the world.

@khaledkekhia1670 2 жыл бұрын

*Works as described , **MyBest.Tools** breaking out rock in my yard to install post for mailbox , fencing and trenches . We built the house on a high point that is mostly rock and this is a tool that helps for installing anything in this ground.*

@preciousuderhi1321 3 ай бұрын

This was helpful. Thanks

@govindpatil8709 Жыл бұрын

🎉 very nice 👍

@virathiyam5401 3 жыл бұрын

Hi there.. thanks for the informative video.. Liked.. Can you confirm if the model has variable speed trigger and forward/reverse rotation functions? Thx..

@anthonymawuliamlalo2789 3 жыл бұрын

Hi, Thanks for the comments and appreciation. Yes the model has 1. variable speed trigger and 2. forward and reverse rotation functions. I will make a short demonstration of the variable speed trigger And upload so you see how it functions when the drill or chisel function are selected.

@MhamadAli-qz8mt 6 ай бұрын

اخي اذا سمحت اخذت واحد زيه بس يعلق لمن اشغله يدور مايوقف لمن افصل البطاريه يوقف. والزر الصغير معلق مايمشي لايمن ولا يسار

@جمعهعبدالله-ج4ق 5 ай бұрын

شايف تعليقك في فيديو تاني برضو ، إن شاءالله قدرت حليت مشكلتك .

@lenslens7379 3 жыл бұрын

Please I found Rgh9528 (yellow and black) 950w is it good as the rgh9028?

@anthonymawuliamlalo2789 3 жыл бұрын

Yh it good. It all depends on the applications for which you bought it for.

@zawlskhawzawl6253 Жыл бұрын

What is the weight of this item?

@hsiensational68 3 жыл бұрын

Hi there. Good video! Thanks for the review. May I please ask if the chuck and the drill bits rotate straight without wobbling? I have the same model and the first one I got wobbled because the chuck did not rotate on steadily and the drill bit was also bent. Even when I put a perfectly straight drill bit into the chuck, the wobbling was bad that I could not accurately drill a hole in a precise point as the tip would run all over the place due to the wobble. I brought my drill back to the retailer and they exchanged it for a new one and now its a little better. Can you confirm that your drill doesn't wobble? Or do these drills all wobble? Thank you.

@anthonymawuliamlalo2789 3 жыл бұрын

Yes it wobbles. But I steadily and slowly press the trigger when I am about to drill, especially, so that the wobbles is minimal when beginning to drill, and after I have made enough drill hole through I press to full speed but steadily and also hold the handle firmly whiles I press hard to reduce the vibration. Also the wobbles happens when the chuck wares out. The interlocking mechanism between the chuck and drill over time loses grip. The lose in grip, happens over time when you use the drill machine for overload working. The lose in grips also result in the wobbles.

@anthonymawuliamlalo2789 3 жыл бұрын

@hsiensational68 3 жыл бұрын

Thank you for your reply. Here is someone else's video of my similar problem.. kzbin.info/www/bejne/i4qXnaeXpZusabM

@anthonymawuliamlalo2789 3 жыл бұрын

Well noted

@NormanTpogi 3 жыл бұрын

What is the vario lock for? Thank you

@anthonymawuliamlalo2789 3 жыл бұрын

A Vario Lock chisel function provides the options, which enables the correct speed for the material been chiselled through the pressure-sensitive trigger.

@AhmadMahmoud2007 3 жыл бұрын

What's the difference between this model and RH18008, THANK YOU IN ADVANCE

@anthonymawuliamlalo2789 3 жыл бұрын

Hi, Ahmad Mahmoud The main differences between the RH18008 and the RGH9028-2. The RGH9028-2 has the below 1. The Operating Mode The operating mode are 4, which are a. hammer drilling mode b. Drilling with out impact in wood, metal, ceramic and plastic, and also screwdriving and threading c. Vario-lock for adjustment of the chisel position d. Position for drilling And 2. SDS-plus quick change chuck and quick change keyless chuck The RH18008 The Operating mood is only a. Hammer drilling in concrete b. Position for chiselling And no additional quick change keyless chuck

@AhmadMahmoud2007 3 жыл бұрын

@@anthonymawuliamlalo2789 which means that the model you've kindly reviewed, could not be used mainly and heavily in concrete!!!

@anthonymawuliamlalo2789 3 жыл бұрын

RH18008 1. Input power: 1800W 2. No load speed: 850rpm 3. Impact energy:7.0J Drilling capacity: - Concrete: 36mm - Steel: 13mm - Wood: 40mm RGH9028-2 1. Input power: 800W 2. No-load speed: 0-1100rpm 3. Impact rate: 0-4000bpm 4. Impact energy: 2.5J Drilling capacity: - Concrete: 26mm - Steel: 13mm - Wood: 30mm From the comparison the concrete thickness is 10mm difference and the impact energy for the RH18008 is higher than the RGH9028-2 So yes it not advisable

@AhmadMahmoud2007 3 жыл бұрын

@@anthonymawuliamlalo2789 I'm very sorry for me being persistent, but I'm currently confused to buy RGH9528 or RGH9028-2 and I'll take my final decision upon your selection.

@anthonymawuliamlalo2789 3 жыл бұрын

Hi Ahmad Mahmoud I understand you and all are perfect and will do a great job. But if you have plans to do metel work and wood work which will involve drilling then the RGH9028-2 is a great tool for you. But if all you want to do is chiselling and drilling into concrete wall then the RH18008 is the good choice. Also the RGH9028-2 will offer you the opportunity to use it as a power Screwdriver, you only have to get the accessories and fix it to it.