INGCO Table saw unboxing and assembly. Model TS15007

In this video, I unbox and assemble Ingco table saw model TS15007. This saw was bought for an equivalent of around $200 USD.
Track: Ascence - About You [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Ascence - About You | ...
Free Download / Stream: ncs.io/AboutYou

[@sbhajian]

I just purchased this table saw in Armenia, Feb 2024 price is currently $320. Same saw, but price went up in 3 years. Thank you for the video, you helped me to assemble it correctly.

[@zafardurrani9544]

Good efforts, work hard with out any fear, GOD BLESS YOU, ZAFAR FROM QUETTA PAKISTAN

[@ImgonnaDIY]

Thanks

[@peterlewis2655]

i just purchased one of these saws, but when cutting it pulls to one side. I noticed the black metal guide is not directly over the cutting blade it is slightly offset to the right. this causes the wood to jam when cutting, i could not find a way to adjust this. I also noticed in you video thia black metal was removed, did you have the same problem?

[@jromhek2070]

Thanks for sharing , one question please what is the noise level in dB for it ? Thanks

[@user-nv9gq5dl9w]

Do the best 👍

[@FriendsPride]

make a video on all your tools and machines to show all and their prices you bought at that time. Regards. I had to replace a rod (through which motor and blade slide up and down) of this table saw because i felt it few thousands thinner than it should be which cause a little play. now blade is more stable at low rpm when turn it off. I bought this at 27500 i wish if i could had made an unboxing video. I also replaced that yellow plate with 4mm acrylic sheet which doesnt have a slack like yellow plate.

[@ImgonnaDIY]

That’s the plan (my tool videos and reviews).

[@uchodhry]

Hay really like your videos found your channel while looking for reviews on the table saw. have some question for you. which city are you from and from where do you get your plywood?

[@ImgonnaDIY]

I’m from Lahore. Got my plywood from Bhatta chowk. I’m sure it’s available in bedon rd etc as well.

[@MothilalLakavath]

Thanks for sharing your experience. I would like to know if the product is of metal and sturdy or made of plastic. Especially outer body parts.

[@ImgonnaDIY]

The surface and extension tables are made from metal (I think aluminum but not sure). The bottom grey area is plastic. It’s seems sturdy enough.

[@nicolasmonty8859]

Hello. After one year.; would you recommend the table saw for diy use?

[@ImgonnaDIY]

its good enough for basic stuff. for the price not too bad if you replace/make a new fence.

[@salmanwaheed1853]

Nice video! What would you recommend? TS15008 for an additional 24k or do you think TS15007 good enough for occasioal DIY?

[@ImgonnaDIY]

The only difference that I know of between them is the expensive one has a fence being full length, dust bag below and wheels for portability. I think the rest is the same so for me this cheaper one seemed like a better value.

[@salmanwaheed1853]

Thanks a Lot! I like your channel! Keep up the good work 😃

[@mrutyunjayam7354]

Hi. Thanks for this video. Am planning to buy INGCO TS 15008. What is your experience with this machine. I wish you all the best with your channel. Regards.

[@ImgonnaDIY]

I am going to do a full review. But In short, overall the machine is good but has two major problems: 1 the fence moves when locked so hard to get accurate measurements. I am about to make a diy fence soon 2 the extensions tables aren’t flat with the table saw. But that’s an easy fix. The fence bothers me more. Also, I can’t be absolutely sure if the blade is 90 degrees spot on.

[@dicksonyu9803]

I just bought one and finished assembling it. Where did you put the two hollow steel pins with a notch in the middle and threads on the inside? 1:45 to 1:46

[@ImgonnaDIY]

I think the thing you’re asking about is for the extension front wing. It goes under it for support.

[@dicksonyu9803]

@@ImgonnaDIY Thank you!!

[@ndresz4239]

@@dicksonyu9803 which way does it go that I can't find it?

[@swatiadvocate]

Nice vedios bro....may I Know where can I buy clamps...

[@ImgonnaDIY]

Go to big hardware shop in your area otherwise online. Toolbazaar.pk or toolsmart.pk

[@ahmd121774]

Thanks for you Is this machine comparable to the strength of other professional machines? 

[@ImgonnaDIY]

Strength seems fine for 1500 watts. The main negative is the fence not being long enough or able to be placed accurately (it moves a little) and the extension wings (side table attachments) not being flush/flat aligned with the central table saw surface. I show the fence part in my other video where I build a fence.

[@ImgonnaDIY]

kzbin.info/www/bejne/mnnNZKyMr9dpnNE This video shows the fence flaw.

[@ahmd121774]

@@ImgonnaDIY thanks

[@aginproject5517]

Hello, before I say thank's to your video cause it was helpful and useful for me. But I want to ask you about some item in the box. There is 2 iron like a stainles steel, may be about 10cm. It's what for bro?

[@ImgonnaDIY]

If you’re talking about the rods, they come under one of the extension trays for support. The extension that’s in front of the blade where the wood would come onto after a cut.

[@saminabatool8709]

HI there, can you share exact dimension of the table saw, height without legs and width and length in mm Please. looking forward for quick response

[@daimmehmod]

Could you make a follow up regarding the ripping power when tested on hardwood like kail (blue pine) ?

[@ImgonnaDIY]

I’ll look into it. But Isn’t Kael a softwood? Not positive but it’s like a light yellow pine (Is it called blue pine?). Correct me if I’m wrong.

[@daimmehmod]

I'm gonna DIY yeah you’re right. My research wasn’t correct on that. It is a softwood. Yeah it’s yellowish in colour. What I meant was the ripping power for 3/4 inch wood, instead of 3/4 inch plywood or MDF. Because I’m interested in picking one up as well

[@ImgonnaDIY]

Yeah sure. That’ll be covered in a bunch of videos I’m soon to make.

[@Asghar-Hassan]

Have you tried bevel cuts? And what about miter cross cuts? Planning to buy this table saw but want to make sure it can do bevels and miters accurately.

[@ImgonnaDIY]

Yeah it can do bevels. And for mitre cuts I made a simple cross cut sled. Made a video on it too (search my channel).

[@user-sj6ub8gq5m]

hi is it good quality?

[@ImgonnaDIY]

Overall it is ok. The fence doesn’t lock stiff so I made a diy fence (video on this channel). And extension table fences are not flush straight (aligned) perfectly.

[@jaulimreaz2386]

B safe yr way of cutting is dangerous l

[@ImgonnaDIY]

Thanks for the concern but don’t worry, that’s not my way of cutting. I only did that once (without a riving knife) while I was making a crosscut sled. I just used that footage.

[@adnanmasood9891]

can u compare it with TS15008 ? would you know what additional features does TS15008 has ?

[@mdsharib2972]

I need this can u deleiver in india

[@ImgonnaDIY]

Bro I bought this from a website here in Pakistan. I don’t sell it. I’m sure you can find this or something similar in India if you look for it. Check online tool stores or tool markets in your town/City. Good luck!

[@patrickyasay1220]

I liked your unboxing and assembly....but I don't approve your cutting method. That's a big no-no.

[@ImgonnaDIY]

Thanks. Many have mentioned that. The good news is... that’s not my cutting method. I just used a shot from when I was building a crosscut sled so I had taken the riving knife out. Watch my other videos to see how i actually cut. Thanks for the concern!