* LOGO 700 * | MY VBAR SETTINGS | Mirko Cesena - EDITION 2022 [FULL Set-Up] (4K UHD)

[@cedricchaignat47]

Thanks for this awesome video ! Can you please make a another vidéo for the vbar governor with the hobbywing. I have a known issue with the softstart and the tail kick during the motor starts.

[@omanos8464]

We thank you for the information, you are a good man

[@robertoostili2720]

Grande Mirko sempre sul pezzo sei il numero uno 😉

[@RotoRCol]

so how about throttle curves? how the heli spool up in bank 1? or is just a switch to kill the power of the motor? I like to do it the old way that the throttle stick controls the power of the motor in bank 1 from 0 to 100% or 0 to any percentage I put in bank 1, not sure how to do it in a vbar control

[@Dukesy]

on vbar you either set a Throttle % like 80% flat or depending on which esc you run you enter the motor and pinion details and then allows you to chose the headspeed you want. I hope that helps you. sorry its a late reply

[@donniepetsche]

Mirko please do a video for hobbywing using vbar gov. From the settings in the hobbywing to the vbar neo. Thank you!

[@jesusrio4198]

Grande Mirko....

[@luismartincordero8078]

Al configurar con el evo . Pide la frecuencia del Gobernor . Sabes cuál es , gracias

[@khalidsafdar3211]

Hi Mirko. This was great. Can you suggest any reference values for Goblin 700. How different would that be from the logo?

[@johnmueller5482]

Great video

[@very9000]

Thank you. Have you ever used V-BAR NEO?

[@luismartincordero8078]

Hola q frecuencia trabaja el hobbyWing de 200a

[@zeemanjr]

Hey Mirko do you use a back up guard with the hobbywing 200 amp esc with bec?

[@django3627]

I love this guy

[@geobugi4451]

It helped me a lot Thank you ^^

[@5johani]

hello, mirko. I'm setting up my 450 heli on your set up. can I ask a question ? if I set the yaw rate 137 and pirouette with full key, right side piro almost no problem, but left side piro is messing up. it's like tail is wobble up and down huge amount while pirouette left fast. so I have to stop piro not to fall down heli. if I turn down the yaw rate to 100, the wobbly tail(up and down side) is disappear. you can set high yaw rate because your machine is 700 size big ? Can you do high speed pirouette any side continusely without problem with your heli? thank you :)

[@budstrader2959]

Good instruction for vbar

[@budstrader2959]

Your setup video is very good..can i use these settings on logo 800 as well?

[@mikehelichannel]

Great video, but how much pitch max/min?

[@rooseveltromanovigentin6986]

Hi Mirko, do you rule in Hobbywing or Vbar Neo?

[@Dukesy]

vbar gov

[@rooseveltromanovigentin6986]

Ruling by Vbar doesn't give the tail kick problem, is there any special tweaks?

[@mauriziomolignoni8712]

Fai anche video in italiano?

[@Dukesy]

What pinion please mate?

[@shawnmonocchi2038]

ratio was 9.714 so 14

[@Dukesy]

@@shawnmonocchi2038 thanks mate

[@frankborgo4646]

next time when you plugged in, take your blades off before the blades take you

[@markevans2280]

Mirko I want to be your boyfriend 🥰