* LOGO 700 * | MY VBAR SETTINGS | Mirko Cesena [FULL Set-Up] (4K UHD)

[@manumunichschannel]

Please make a settings video for the 600sx. Would love to see your recommendations!

[@bobbycool07]

Thank you, Mirko for publishing! I, and I know many others, appreciate your flying style very much! Seeing your settings in one of the major FBL controllers gives many of us ideas on how to tweak our own controllers. In forums several, like myself, look forward to more settings from you, for more helis. I and others would appreciate recommendations for e.g. Logo 600SE, Trex 700 (if you have one?) and also a smaller heli, around 450-size, that some of us are limited to during winter. Keep them nice videos coming! Both with your flying and with your recommendations for settings! :) /Bo

[@joannisreiffen3556]

Hi Mirko, great video. It really helps a lot to understand much better the possibilities of the settings. Would love to see the same video about a Logo 480. All the best. Joannis

[@kenmeidinger1456]

Hi Mirco, Great video. I always just fly the stock settings in VBar Neo. I thought I wasn’t good enough to change. I am just trying to learn what the difference is adjusting the VBar settings. This really helps me. Also one of the pilots in Canada that has helped me realize I need to set the helicopter up properly. It would be really great if you would setup a Diabolo 700BE…lol. Thank you !! Love your flying.

[@user-lw2hs7qs4b]

Appreciate the response buddy You're a great pilot

[@androcorc]

Great Mirko, Please Logo 600sx and Logo 480xx setups!!!

[@DennisCamps]

Dont think you can fly like Mirko when u copy his settings :) If you are a moderate flyer i would not recommend 128 on the agility. Be carefull with it and make small increments. Nice Video Mirko really enjoyed it, we met this year at global 3d, you signed my trex 500 canopy together with Kyle. Good luck and for the next heli i would like to see logo 550. keep flying!

[@radukapu]

Awesome video 👏🏻 Could you please make a video of setting for logo 600 ?

[@mpolzin78]

Mirko could you post your VBAR setup file from your V-Control. Bobby Watts and Kyle Stacy did this a little while back and it gave me some insights into all parameters of the NEO. Thanks

[@very9000]

Thank you. Have you ever used V-BAR NEO?

[@eliashuemer6931]

That‘s great Mirko! I will buy my Logo 700 soon and also maybe a VBar Control, and so it‘s really interesting for me which settings you use and it would be amazing if you can do the same video with the 550😉. Good job!

[@mirkocesena]

Elias Huemer Thank you very much Elias! This is amazing, you will love it for sure! Yes I will consider to shoot a video for the Logo 550, be sure to check out the voting picture on facebook today. I will post a picture with different helis and Everyone can comment with the name of the heli and the heli with more votes will be used for the video!😉

[@eliashuemer6931]

Mirko Cesena - CesiX Thank you very much Mirko! For shure i‘ll vote😉. Thanks!

[@janjooa1]

Thank you much, your a superstar, please have a next video set up for logo 800.. Thank you

[@truckermax1]

Great info Mirko! thank you for making the time to share your valuable suggestions on the Vbar/Vcontrol. Can you also do one for the Align Trex 700e DFC 850MX equipped motor? Thanks again!

[@mirkocesena]

Thank you very much truckermax1 !!☺️ I actually haven’t got any Align Motors, I’m just doing it with Scorpion motors, I’m sorry

[@sams1083]

Can you discuss some.mechanical setup tricks

[@khalidsafdar3211]

Hi Mirko: Can you please guide me with setting up my Goblin 700 with Vbar Neo. How different will it be from the logo 700? Any tips will be appreciated. Thanks. Khalid.

[@very9000]

Здравствуйте. У меня Вертолет 🚁 TITAN X50EF (Thunder Tiger) 600 размер Я повесил на этот Вертолет фюзеляж (копия «американский спасатель» Скажите, можно выставить значение GAIN - 50 ? (Основной Ротор) ? Вообще, какие порекомендуйте поставить параметры, что полет моего вертолета был приближен к полету ВЕРТОЛЕТА - КОПИЯ ?

[@very9000]

Hello. I have a helicopter TITAN X50EF (Thunder Tiger) 600 size I hung the fuselage for this helicopter (a copy of the "American rescuer" Tell me, can I set the GAIN value to 50? (Main rotor)? In general, what would you recommend to put the parameters so that the flight of my helicopter was close to the flight of the HELICOPTER - COPY?

[@opticworld]

Thank you Mirko. Logo 550 !

[@mirkocesena]

Thank you!! opticworld ☺️ xcellfury99 I will post a picture with different helis on facebook and everyone can comment with the name of the heli that they want to see and the heli with more votes will be used for the video!😉 So be sure to check out my facebook page soon👌

[@shawnscott9704]

Mirko it has been a few years now has much changes in your setup? What is your head damper setup for the orings you have installed if you do not mind answering? Thx!

[@rodolfo-f7i]

Nice, mirko!

[@mirkocesena]

Thank you Rodolfo Oliveira!!

[@dernawey]

well illustrated

[@user-lw2hs7qs4b]

Hey buddy which comes first when setting up a heli ESC or flybarless system or it doesn't matter

[@mirkocesena]

First you have to set the mechanical parts: tune the links until the servos are centered when the swash plate is in the center of its movement and is 90 degrees from the main shaft. Same for the tail blades, tune the link until the tail blades measure around 3 degrees (or 0 degrees) of counter couple when tail servo is centered. After you can start with the electronic setups...

[@PaulGondras]

Great set up Mirko, could you show you're oxy 3 one?

[@mirkocesena]

Thank you very much Tarygole Paul 😉 xcellfury99 I will post a picture with different helis on facebook and everyone can comment with the name of the heli that they want to see and the heli with more votes will be used for the video!😉 So be sure to check out my facebook page soon👌

[@dtorazza]

Hi Mirko, Just a question... In my VControl/Neo I have "Agility" instead of "Rate" under "mainrotor" menu... They just changed the name? It's a little bit too much time that I don't update...

[@mirkocesena]

Yeah they just changed the name ;)

[@MrLeeRossi]

I have a Mikado v bar radio with a V BAR NEO ON IT. I`M HAVIONG TROBLUE WITH THE throttle not working like it should. To spool up the helicopter I have to go to run on the radio and the helicopter goes to full throttle and you can`t slow it down with the Radio.

[@very9000]

Friend, hello. How do I specify the angle for the swash plate in the VBAR CONTROL menu for the LOGO 800? Thank you in advance..

[@very9000]

What is Collective Balance responsible for? How does it affect helicopter flight? I just can't figure it out.

[@very9000]

Hi, dear friend. Tell me, why is the setting in the Mainrotor menu needed - Lightness?

[@DimitriSidorov]

Cool, Mirko!

[@mirkocesena]

Dimitri Sidorov Thank you so much Dimitri!!👍

[@TheRavin87]

Hi, thanks for the video. It is very informative. Question,what mode did u set your hobbywing Governor( linear mode or fixed wing ) when running vbar gov ? Thank you.

[@jeffreymyers4807]

Ur the man, thank mirk

[@very9000]

Hello friend. Tell me are you using Governor ESC SCORPION or Governor V-Bar?

[@mirkocesena]

V-Bar Governor

[@very9000]

@@mirkocesena Thanks 🙏 I'll try ESC SCORPION 🦂

[@very9000]

@@mirkocesena Tell me, maybe there are some revolutions on the ground, and others in the air?

[@jrichey73]

Great video!

[@bilalalfarizi2460]

when are you gonig to make a review for logo 600 set up?

[@19seba79]

Grande Mirko e grazie!

[@mirkocesena]

sebastiano previte Grazie mille a te!

[@19seba79]

Mirko Cesena - CesiX dovresti farlo anche in italiano 😂

[@very9000]

Hello friend, I want to slow down my helicopter so that it flies like a copy. When I slowly raise the collective pitch stick, my helicopter reacts sharply and goes up. Can I make it slower?

[@sampadmahapatra7694]

Mirko please show me the setting of v bar touch

[@julienBKK]

Please, what series of Savox Monster are you use for cyclic and torque ?

[@McMic81]

Please show the Setup for a Logo 550...THX for this Video!

[@mirkocesena]

Thank you AtzeKocH xcellfury99 I will post a picture with different helis on facebook and everyone can comment with the name of the heli that they want to see and the heli with more votes will be used for the video!😉 So be sure to check out my facebook page soon👌

[@very9000]

Hi 🤝 friend can you help me calibrate the scorpion motor?

[@AbileneRCSociety]

Hi Mirko, what pitch are you running (12 ,13, 14) degrees at 93 Collective Endpoint?

[@thallessantiagorc5993]

Hi Mirko, Are you using vtx 697 or 717? Tks Buddy..

[@mirkocesena]

Thalles Santiago RC Hi Thalles, I’m using the VTX 717 Blades👌

[@SupremeRC]

Mirko use 697vtx

[@rchelicopter]

Very nice, Thanks Mirko!

[@mirkocesena]

rcheli.club Thank you very much to you!

[@mirkocesena]

About yor question about the STYLE: in this video the LOGO 700 Style is higher than the one I normally use (that is 85) because I performed some tests and forgot to re-set the values to 85.

[@saligator8879]

background song?

[@bilalalfarizi2460]

logo 600 set up please

[@burkanfpv4904]

you are flying mode 1??

[@mirkocesena]

Yes, Lil Burkan FPV

[@RotoRCol]

they should keep the production of logo xxtreme 700 at least for parts, yes do it and logo 400 lol

[@darius7823]

Logo 600 😉

[@mirkocesena]

Darius Schulz xcellfury99 I will post a picture with different helis on facebook and everyone can comment with the name of the heli that they want to see and the heli with more votes will be used for the video!😉 So be sure to check out my facebook page soon👌

[@bilalalfarizi2460]

do it on logo 600 set up

[@jdfpv1998]

Oxy😆

[@SalehAlrashaid]

Perfect video...

[@mirkocesena]

Saleh AlRashaid Thank you so much ☺️

[@p7ayfu77tech]

Great video Mirko. Hope you are well kisses and wish to see you soon. Xxx Maria

[@mirkocesena]

Thank you very much MariaP☺️ Yes I’m very good hope you are good as well and wish to see you soon 😉

[@umarraiofficial6229]

🇮🇩👍🏻Smart Radio

[@xcellfury99]

LOGO 550

[@mirkocesena]

xcellfury99 I will post a picture with different helis on facebook and everyone can comment with the name of the heli that they want to see and the heli with more votes will be used for the video!😉 So be sure to check out my facebook page soon👌

[@mariusblochinger442]

Oxy3

[@sampadmahapatra7694]

With your logo 700

[@martinr7659]

oxy 3

[@very9000]

С НЕТЕРПЕНИЕМ ЖДУ ОТВЕТА 🙏🙏🙏🙏🙏

[@sampadmahapatra7694]

Please

[@very9000]

Здравствуйте. У меня Вертолет 🚁 TITAN X50EF (Thunder Tiger) 600 размер Я повесил на этот Вертолет фюзеляж (копия «американский спасатель» Скажите, можно выставить значение GAIN - 50 ? (Основной Ротор) ? Вообще, какие порекомендуйте поставить параметры, чтобы полет моего вертолета был приближен к полету ВЕРТОЛЕТА - КОПИЯ ?