Thank you to Henson Shaving for sponsoring this video! Use code INHERITANCE to get 100 free blade refills at hensonshaving.com/inheritance
@linvillejeffrey8 ай бұрын
I normally hate sponsored ads, but you make them worth the watch. Love the wholesome interaction with your wife!
@WestCoastTragic8 ай бұрын
I've only bought one sponsored item, and it was this razor. It's seriously worth it. My only regret was it wasn't in support of this channel.
@rainmannoodles8 ай бұрын
Pro tip: the RK blades that come with it are just okay. A better blade like Feather will give you much better results.
@grizcuz8 ай бұрын
If you fall out of love with engineering, that new facial hair could open up lots of new opportunities in the acting profession if they're hunting for someone to play the head of a dangerous biker gang.
@doylerabjohn34358 ай бұрын
Great sponsorship , Love your commercial had me laughing to
@mcseforsale8 ай бұрын
'Pornstache is leaking" is by far one of the funniest things I've heard this week. Props to your better half!
@alucard87pl8 ай бұрын
Just goes to show, we need more Mrs. Inheritance Machining in these videos. Even if it would just be a disembodied voice with a biting, snarky comment on something.
@InheritanceMachining8 ай бұрын
She caught me off guard with that one. She usually does
@anandarochisha8 ай бұрын
More facial hair is better ? Really ? You are already like..Seal Team 6..
@ashesman18 ай бұрын
We call that a chopper here. After Chopper Reid.
@copescale95998 ай бұрын
Seeing all that runout was like seeing a murderer in a horror movie.
@InheritanceMachining8 ай бұрын
tell me about it
@dazaspc8 ай бұрын
@@InheritanceMachining Simple fix though. Just grind the point. O ring drive the center and mount a simple die grinder in the tool post. It will center the thing to the bearings so it can be fitted in any position and it will rotate true. As for being on center bearing wise perhaps you could machine the bore for the bearings with the center mounted in the spindle on its Morse taper. I was a little surprised you didn't do this in the first place. Also a tip. I have been repairing machine tools for 30 odd years and for super precision bearings or any bearing really there is a set amount of grease you should use to lubricate it. Many machine manuals will include this information but if you have a bearing book that lists the bearings you are using it should give the correct volume. It's important as to much may cause the internal elements to skip at speed let alone overheat. The nearly universal grease for head stock bearings in CNC is Kluber NBU-15. You wouldn't go wrong using that and it can handle element speeds of over 3500 rpm in bearings that have 400 mm internal mounting diameter. So in the little bearings in the tail stock center there shouldn't be any sort of speed restriction using it on the lathes you have. It's not cheap but usually you would only use a 50 gram tube on all but the biggest bearing sets. Please dont take this the wrong way it only a suggestion from way back in the cheap seats. Cheers
@smottiebug75188 ай бұрын
well he did say he didnt have the grinding equipment. But its funny that he would have about 100k in machines but he doesnt have grinders that cost less than 100. because you cant always put everything in a lathe or a mill.
@RapTapTap697 ай бұрын
@@smottiebug7518 It's not your regular bench grinder that he needs. There's no way to get close to his needed precision with one of those
@caseynewsom18508 ай бұрын
Just want to say i love your style of content. No other creater does nearly as good a job of explaining the methods and procedures you use to measure accurately and machine precisely. Its so much more interesting than just watching chips fly. Thats what makes your content something to come back to every time in my opinion! One of the last channels untainted by flashy thumbnails and over sensationalism! Bravo sir
@JORGE_BRASILEIRO8 ай бұрын
This Man is epic
@betaich8 ай бұрын
Check out blondihacks she does the explaining also really well.,
@InheritanceMachining8 ай бұрын
I really appreciate that! Thank you!
@rickbelde28738 ай бұрын
Absolutely agree!
@user-tx2nv1rb9k8 ай бұрын
I have always wanted to state this exact sentiment! I immediately subscribed due to the fact that the guy does not keep the streamlining process to himself!!! I realise he may be watching this thread so: CONGRATULATIONS IN YOUR ENDEAVORS @INHERITANCEMACHINING!!!
@ChristopherLien8 ай бұрын
I'm a little surprised you didn't embark on a side project to set yourself up for cylindrical grinding on the surface grinder.
@InheritanceMachining8 ай бұрын
Who says I'm not 😉
@inherited-shop8 ай бұрын
@@InheritanceMachiningthat is a project, maybe several episodes to complete, I would like to see! I have a surface grinder, that is, at the moment, down😢 due to lightning taking out the phase converter control, $$$$ to fix, which I used more for fixing chipped and poorly ground woodworking tools. I would like to broaden its uses too.
@ChristopherLien8 ай бұрын
@@InheritanceMachining That's the spirit! 😆
@rbpercussion898 ай бұрын
This comment reminded me the one time I saw a reamer get sharpened on a surface grinder with an indexer and a rotating attachment. It was very impressive.
@beardyeighty8 ай бұрын
You and @CuttingEdgeEngineering are my two favorite things about Fridays.
@jones73998 ай бұрын
i know right! every friday, i watch CEE and Inheritance while eating dinner after work!
@InheritanceMachining8 ай бұрын
Daww shucks 😊
@AntonGudenus8 ай бұрын
It's the same for me. CEE and Inheritence are my friday ritual.
@rfirtfan28098 ай бұрын
The two sides of the spectrum, hobby machining and heavy equipment repair machining
@idjles8 ай бұрын
@@rfirtfan2809but so similar in many ways.
@intellectualiconoclasm32648 ай бұрын
You spin me right-round, machinist, right-round! Like a live-center, right-round!
@AlexDiestel8 ай бұрын
Well. Almost round.
@intellectualiconoclasm32648 ай бұрын
@@AlexDiestel LMAO! You win all the internetz I have to award today!
@edo86978 ай бұрын
Great video as always. Hint: (re)finish the end of the live center at assembly, install the center in the tailstock. Use a vacuum cleaner belt with a make shift pully in an electric drill to drive the live center. Fit the belt over the live part of the live center-I normally just have someone else operate the electric drill, your tail stock just became the drive to turn the live center perfectly concentric. Take very light cuts with the compound, and a very sharp cutter. This is also how you fix your other centers.
@InheritanceMachining8 ай бұрын
Thanks! I'm thinking of doing exactly this with a tool post grinder!
@chrisstephens66738 ай бұрын
If you mount a dermal style tool in the toolpost and the live centre in the headstock you can grind the 60 degree. Most times the drag of the live centres bearings and seal is enough to drive the centre, if not lock it with sticky tape. A small grinding wheel in a dremal imparts very little load on the part being reground.
@VoidedWarranty8 ай бұрын
@@InheritanceMachining try a $12 CBN insert from china instead, no expensive equipment, easily replaces grinding on hardened material. Very, very low tool pressure, and can take the last tenthousandth in hardened steel.
@Bob_Adkins8 ай бұрын
@@InheritanceMachining Watch James (Clough42) make a post grinder to avoid some of the pitfalls!
@harmlesscreationsofthegree12488 ай бұрын
We have an old saying here in Australia. You can’t polish a turd but you can roll it in glitter. Or bronze chips. Either way, a fun vid and the start of a new tailstock journey 🙂
@InheritanceMachining8 ай бұрын
I like that... a lot 😂 Thanks!
@jonathanoostendorp408 ай бұрын
I purchased a set of MT2 and MT3 reamers to clean up tailstocks and headstock of smaller machines. With a little care, you might be able to correct the problem.
@dennythomas88878 ай бұрын
👍😁 they work amazingly well.
@brendanshorter55508 ай бұрын
I have 1-5. Restoring old iron they're a necessity.
@StarfallSabersForever8 ай бұрын
Great video! You and your wife bantering needs to be a regular segment. Side note: My dad was the cheapest person I knew and in the long run his cheapness ALWAYS ended up costing him more money in the end haha!
@InheritanceMachining8 ай бұрын
I'm sure she will continue to make appearances from time to time 😀 BTW your father also probably ended up with more tools in the end as well!
@StarfallSabersForever8 ай бұрын
@@InheritanceMachining 100% correct 😅
@stevewyckoff69048 ай бұрын
Instead of using the tailstock chuck to align the pre-load not in the lathe, you might want to consider making a "pusher" - a Morse taper with a disk on its face, faced in the lathe to make it square to the lathe axis. Very handy.
@InheritanceMachining8 ай бұрын
I like that idea. I think i saw Joe Pi makes something similar to hold disc shaped parts just using pressure
@David-xo8ci8 ай бұрын
A greybeard taught me a trick for that. Turn what is basically a negative of the part you want to support out of a soft material with a spot drilled on the other side. Then clamp the live center on the spot. I've used this technique to support an axle with a dome-shaped end on a cnc lathe, it worked great.
@MNWCreations8 ай бұрын
Seeing those curls and then going "everything reminds me of her" - but deviating to a razor segue, nice.
@cubikx85757 ай бұрын
Just a fun little fact I have learned going for my machinist ticket, this is technically a "rotating dead center" The dead and live refer to if the center has power behind it or not, so the same center could be live if its in a headstock or dead in a tailstock. That being said I will still call them live centers
@caffienatedchaos8 ай бұрын
Ok, I'm here, all centered and ready to be entertained... :D
@quakxy_dukx8 ай бұрын
Or perhaps… centretained? I’ll see myself out
@thorbjrnbrdholt83258 ай бұрын
I got my soda and popcorn ready for a delight
@ronwilken52198 ай бұрын
@@thorbjrnbrdholt8325 disappointed, no side projects and only one measly little screw, not up to snuff, in the "boxoshame"! He's slipping. Or getting better.
@2redrovers8 ай бұрын
To be fair, it's hard to concentrate properly on creating more side projects when your pornstache is leaking all over the place @@ronwilken5219
@InheritanceMachining8 ай бұрын
@@quakxy_dukx 😂 😂
@willhutton15168 ай бұрын
If you are getting any grinding equipment in the shop, I’d highly recommend getting both the regular wheels and one CBN wheel. Those CBN wheels will NEVER wear out. Use a diamond stone to get them flat, then you simply use it until you either crash it to where it breaks, or you use it enough to where you wear out all the material from trueing it up with the diamond stone lol (in about 400 years lol)
@InheritanceMachining8 ай бұрын
Noted!
@thepanduuh8 ай бұрын
Where do you find information on CBN wheel trueing/dressing etc? Basically just have to know someone with the experience?
@willhutton15168 ай бұрын
@@thepanduuh we have them at my work. You literally just get a diamond stone (which should come with them, if not, they are sold separately) to dress them and make them flat, then your good to go. We get our stuff from MSC and granger. They should have what you’re looking for. They are very expensive and are very accurate wheels. They are about $300-$600 per wheel. You dress the wheel when it’s loaded up with aluminum oxide, then you true it up with a diamond stone. Everything would probably be about $800 for all the necessary products.
@ronwilken52198 ай бұрын
@@thepanduuhtry this old Tony's site. He did a video on using cheap CBN wheels and trying to true them up. He was, in my opinion, reasonably successful. Another site well worth watching although he's not a regular poster. Just when it suits him.
@anotherrandominternetdog8 ай бұрын
@@ronwilken5219 @thepanduh I’ll second This Old Tony - very enjoyable.
@rask4p8 ай бұрын
Cutting these Morris tapers as just another step in the process is making me very happy. I watched Adam Savage learning this process and it always brings a little extra Zen watching this channel.
@Vikontus8 ай бұрын
Конус морзе...
@gerpeter44896 ай бұрын
Morse taper...
@dennythomas88878 ай бұрын
The appropriate size Morse Taper reamer will go a long way to correcting your tail stock issue. It worked wonders on mine.
@swager19505 ай бұрын
Ty so much , At 74 years old I miss Machining .... the lathe as always been my favorite machine so is all the rest . I Had tear in my eyes when watching this video I thank you . I do wish I had the money to have my own little shop and keep inventing what people never saw or even teach it . I won the number 1 in Canada for building a testing machine for a word wide compagnies . Thanks again really enjoy these video .
@RonCovell8 ай бұрын
What a beautiful job, Brandon - from the design, to the detailing of each step, and the beautiful filming. I was so crestfallen at the end, when the hoped-for accuracy wasn't there. It will be very interesting to see how you deal with these issues!
@paulnagel81618 ай бұрын
Great timing. I just got my first lathe this week!
@InheritanceMachining8 ай бұрын
congratulations!
@phillhuddleston94458 ай бұрын
When you need more precision than a typical non-adjustable three jaw chuck try using a Buck style three jaw chuck instead. They are the same as a standard three jaw chuck but offer a small amount of adjustment to get the part running concentric with the spindle without loosening and retightening the jaws possibly scratching or marring the part. They are more expensive than a traditional three jaw chuck but well worth the money, once you use one you will not want to use one without adjustment.
@BPSspace8 ай бұрын
Using the compound to do fine adjustments on boring the ID is genius! Love the Hulk Hogan as well :)
@InheritanceMachining8 ай бұрын
Let me tell you something, Brother! Everybody learns something in Hulkamania!
@ClockworkGFX8 ай бұрын
Those bearings were $400 a piece? :o
@InheritanceMachining8 ай бұрын
not the ones I bought 😂
@RambozoClown8 ай бұрын
Now you see why cylindrical grinders use dead centers, often spring loaded to account for part growth. I'm sure you can tune this up with a little work.
@ProfessorMAG8 ай бұрын
A Morse taper reamer chucked in the headstock and run into the tailstock is what I used to fix a rough bore. Worked wonders, just go SLOW! (rotate by hand)
@maxheadflow8 ай бұрын
The concentricity issue is all in the center part. What about driving the center with a belt and using a tool post grinder to recut the point?
@СергейШ-ю2т8 ай бұрын
А также сделать термическую обработку до твердости 55HRC
@InheritanceMachining8 ай бұрын
That's exactly what I'm thinking of doing 😊
@ipkanytin28 ай бұрын
Had to finish the backlog for your channel. 4 weeks of pure agony but I’m glad you’re back!!!!!!
@InheritanceMachining8 ай бұрын
😂 glad to be back!
@IanHudson-j5gАй бұрын
Saw a tool for work hardening surfaces on another video. Pretty simple, It was a ball bearing mounted in a holder with a ball race keeping it in place. You just drive it into the surface and it compresses the surface slightly and hardens it.
@redmiataenjoyer7208 ай бұрын
Im a machining apprentice and These videos are always so fun to watch and i also learn a ton from them. So, big thank you for making these.
@InheritanceMachining8 ай бұрын
glad I could be of help! Thanks
@lewisavinash18 ай бұрын
im not a Machinist, but planning to buy a Lathe which fits my budget after watching your Videos@@InheritanceMachining
@PatrickHoodDaniel8 ай бұрын
If a good one costs $1000, then the useless turb must be worth something. I've seen threading done in reverse so there is nothing to hit on the way in (I guess by flipping the tool 180 degrees). Have you tried this? Just making comments for the youtube algorithm, but curious anyway.
@diegotonnicchiovlrd27428 ай бұрын
I like your channel so when new vid drops is a good day
@120DEA8 ай бұрын
“Ok, I’ll come up with you…” She said NO! HAAAAAAHAHAHA! I thought the new look was kinda beautiferous myself! 😂
@InheritanceMachining8 ай бұрын
😂 Hell yeah, Brother!
@gertjevanpoppel72708 ай бұрын
To get hardening on the area where the needle bearing is rolling you can use a technique called burnishing.... This way you get a hard surface without putting heat into the part and maybe warping... There are a few nice videos on diy burnishing tools 😀👍 And this also will make a nice project / tool to make yourself. Thanks again for the nice video and project
@InheritanceMachining8 ай бұрын
oooo that's a really clever idea. Why didn't I think of that! 😂
@Bro-trust-me8 ай бұрын
@@InheritanceMachining - Chrome plating might also be an option, would bring the surface up to ~70HRC. Home options are probably less straightforward than burnishing though, which I agree is a great idea!
@Diazjake8 ай бұрын
Remember you CANT polish a turd.. But you can roll it in glitter!
@InheritanceMachining8 ай бұрын
😆
@captainraypaul49198 ай бұрын
I did the exact same thing! All that work to find my tailstock in the same shape as yours. Gotta love used machinery! Great video though!
@FlyGamingChannel8 ай бұрын
I really felt that one, like I was the one that had invested all that time and effort. Sorry it went that way. Still, it was a great video.
@InheritanceMachining8 ай бұрын
Thanks. I'm not giving up on it yet! 😁
@Linkus_18 ай бұрын
You shouldt use Lithium grease for anything! Horrible stuff! Use Synthetic.
@magic42218 ай бұрын
I believe the lithium grease wasn't the best choice. Should have used a marine grade bearing grease. Just a thought from someone who uses lots of bearings. Great video, thanks.
@maxreichard61648 ай бұрын
First?
@cjmerrill79718 ай бұрын
please get square inserts. they can do chamfers, facing, and turning i think you’d love them.
@InheritanceMachining8 ай бұрын
I ironically have a bunch with not holder for them haha
@thomasberger51108 ай бұрын
Can’t you just harden the Parts and then Hard turn them?
@tangomike78 ай бұрын
Given how easily you separated the drill sleeve off your newly machined taper, I think your morse taper angle might be off. The taper in the tailstock quill doesn't look great, but it's best practice to blue the taper and test fit it to a known good sample. Sharpie also works if you cross hatch the surface, lightly fit it, give it a 1/16 of a turn and remove to see where you have contact.
@TheRecreationalMachinist8 ай бұрын
Another brilliant build. Thanks for sharing. Matt in the UK
@3DFLIP18 ай бұрын
stefan gotteswinter has some good videos on using a surface grinder for cylindrical grinding. Another side project 😁
@kennethtencza92098 ай бұрын
You could try touching up the tailstock barrel with a tapered reamer.
@InheritanceMachining8 ай бұрын
good idea!
@xmetal2808 ай бұрын
My primary goal when starting any KZbin video is, "I hope I get to see a big stinking turd" and you delivered admirably.
@HappilyHomicidalHooligan8 ай бұрын
Turds are NEVER useless... Depending on what kind of Turd it is, it can be used as Fertilizer and/or a Bad Example... 😄😁😆😅😂🤣
@InheritanceMachining8 ай бұрын
So wise!
@Etol19638 ай бұрын
I don't want to brag, but my first attempt at cutting a morse taper was a MT3 weldon style end mill holder on my South Bend 9A. 0.005mm runout measured at the end mill shank, so 2 tenth in your currency if my math is right. Probably beginner's luck and I'll never be this accurate again in my live. Love your content and the humour. Subscribed a couple of weeks ago and I'm a fan.
@InheritanceMachining8 ай бұрын
Dude that's some serious precision. But I know the feeling. It's like the stars align just right, the wind blows in the right direction and it just comes out perfect. 😂 Thanks for being here!
@3literheater8 ай бұрын
Kluber NBU15 is the grease you use for TAC bearings.
@polyaddict8 ай бұрын
I love the wholesome freaking out your partner with facial hair :)
@robertmiller46648 ай бұрын
To get the best accuracy machining your live center, I think I would have machined it between dead centers. A carbide dead center would be my choice.
@robertlawson85728 ай бұрын
At least you may be able to differentiate between "dead" and "live" except... A "solid" centre, which is what I think (correct me if I'm wrong) you mean, can be used "dead" or "live". Fitted in the tailstock of a centre lathe, it's "dead" (not driven) Fitted in the headstock, and rotating at spindle speed, it's "live" (driven) But... Take (say) a Jones and Shipman 1310 universal grinder. When seeking maximum precision in cylindrical grinding work,, you lock up the headstock centre, rendering it "dead", and then work between "dead" centres. Conveniently, there's (there was on older models) a little reservoir of oil in the tailstock, with an applicator quill to oil centre holes before mounting workpieces... A "running" centre is not a "live" centre, and a "solid" centre isn't necessarily "dead", since in a lathe headstock, it's "live" or "driven"
@robertmiller46648 ай бұрын
@@robertlawson8572 and you are correct. I used dead center for solid center. An old machinist taught me how to use them. And his very old Monarch had the reservoir on the tail stock for lube, he used white lead and a tad of way oil to keep things smooth. You also had to monitor part temperature as you machined, if it started getting too warm, it would get longer, and try to warp the part being turned (rifle barrels).
@ScoobaSteve4518 ай бұрын
I was a machinist (manual lathes, mills, and screw machines) for 20+ years, I never made the transition into CNC machining and moved on... I've since found an outlet for my metal working in knife making. Your projects take me back to my days of manual machining from hand drawn prints, and your presentation and naration is both informative and entertaining. I look forward to seeing a notification for each of your new videos.
@DAKOTANSHELBY8 ай бұрын
When you first turned the MT in the new live center I was surprised you didn't blue it and do a test fit to look for contact patterns. You just moved on. Then you would have found the problem. So your looking for a tapered reamer to clean up the contact surface in the tail stock I bet. Great video.
@bestbladerevah8 ай бұрын
You should get what's called a Hail Mary Fixture for your Surface Grinder. we use it for our smaller pins and such that need precision
@InheritanceMachining8 ай бұрын
this is on my wish list!
@HappilyHomicidalHooligan8 ай бұрын
I prefer Fiscally Responsible instead of Cheap myself... 😄😁😆😅😂🤣
@InheritanceMachining8 ай бұрын
😂
@Joe___R8 ай бұрын
If you end up deciding to hearden it in the future, you should just make it 0.100" bigger so you have enough room to remove any warping that occurs. You should be able to easily remove the excess on your lathe with ceramic or carbide tooling.
@WhozaCardoza8 ай бұрын
OH THANK GOD! I was starting to get machining video withdrawals
@InheritanceMachining8 ай бұрын
haha you and me both!
@Simple_But_Expensive8 ай бұрын
Prettiest fail I have ever seen. I love watching your content, even though all you make is more tools. Toolmaking is one of the most difficult things since they have to be more accurate than the parts turned out by a machine shop.
@InheritanceMachining8 ай бұрын
That the part of the challenge I like! Just wait until I get some more grinding capabilities 😀 Thanks
@ByronGiant8 ай бұрын
"Pre-load Nut" seems like something there should be a support group for
@TalRohan8 ай бұрын
Something tells me that waiting a little longer to make what is actually a gorgeous looking live centre might have been a good idea after all. Will the centre be ok if you get the tailstock taper cleaned up? I'm not sure I know how you could take the live centre apart again if it needs something doing to it. I always really enjoy your video's ...even the bit where you threaten your lady with dodgy facial hair Thankyou for sharing
@InheritanceMachining8 ай бұрын
😂 theres are a few options for that. I may be able to burnish and grind the tip in place by driving it with a belt. And once I get the tailstock taper fixed the center taper could either be fine or require some adjustments as well. A lot up in the air at the moment though. Thanks, Tal
@TalRohan8 ай бұрын
@@InheritanceMachining ah good to know there are ways. I had not thought of those at all.
@hunteraaron25058 ай бұрын
I’m a machinist in the making. Watching your videos helps me a lot. You explain so well. Thank you brother. Getting my haas certifications in high school.
@InheritanceMachining8 ай бұрын
Nice man! Glad they could help
@gbestwick8 ай бұрын
You can get Morse Taper reams. I would almost think that a quick run with a finishing MT ream might get rid of some of that ugly.
@InheritanceMachining8 ай бұрын
I think you are right!
@rustytruck668 ай бұрын
Try using the Morse taper sleeve as a blue check to verify that the taper you cut on the live center is correct. Find out where the high spot is and adjust your compound accordingly
@JJDerksen-v9k8 ай бұрын
If you can find 1/4” anvil grinding wheels, you can mount a die grinder to a tool holder and use that as a cylindrical grinder, just make sure to use some cardboard to protect the ways and a vacuum to collect dust, you can also use a dremmel but you get clearance issues
@SuicideNeil8 ай бұрын
Yo dawg, I heard you like centers, so I put a live center in your live center so you can center while you center.
@TumzDK8 ай бұрын
a video like this, really makes me wonder how the worlds first live center was made.....
@ronwilken52198 ай бұрын
Two pieces of Obsidian stone I would think.
@MikelNaUsaCom8 ай бұрын
I have it on good authority, if you take a left turn at albuquerque it is indeed a short cut... but again, the answer is not only important, having the right question is also important. =D
25:32 Quit Flirting and just go get a room people! 😄😁😆😅😂🤣
@InheritanceMachining8 ай бұрын
😂
@mrgunn27268 ай бұрын
You should reach out to Starrett or Mitutoyo to see if they want to become sponsors. Also, wouldn't adding a liquid cooling system to your lathe help with the cooling of the material?
@dieguerrero8 ай бұрын
Turning cones is not easy. Make an undercut in the middle of the taper, leaving 2 contact relatively wide contact points and it will seat much better. My live center has this feature
@InheritanceMachining8 ай бұрын
Oh good point. Come to think of is I think I have some MT chuck arbors that have this same feature but never thought why
@dp26988 ай бұрын
I’m waiting for the day for u to say screw it and build a new lathe from scratch
@InheritanceMachining8 ай бұрын
👀
@AnotherOtherMan-alive8 ай бұрын
I'm curious why you haven't installed some form of cooling onto the lathe like you have on the mill, sure you may not need it all the time but that does mean your hands/bottle are further away from the work piece. At least consider adding one to the hardinge lathe.
@InheritanceMachining8 ай бұрын
it actually has one (as does the hardinge) just haven't taken the time to figure out getting some 3 phase power to it
@AnotherOtherMan-alive8 ай бұрын
huh.... I'm assuming you've run the numbers for running three phase power for the whole shop circuit as by the looks of things you're on the way to nickel and diming yourself to the cost anyway@@InheritanceMachining In any case, love to see your stuff man.
@forgeperformanceand4x48 ай бұрын
Love the build 2 things though Is the seal in backwards Dont overload bearings with too much grease. Need about 20% of the area of the bearing Hopefully can save the center by dialing in the body in the 4 jaw and usingna drive dog on the nose?😊
@franczy8 ай бұрын
We had to machine some hardened O1 part at my shop and we were able to remove .030 total with diamond tipped inserts at .005 per pass. This might be an option for you if you don't plan on getting the grinding equipement for it.
@larryw53298 ай бұрын
Doesn't diamond burn up machining steel? I thought CBN is the preferred hard turning tool
@arauchfuss8 ай бұрын
@@larryw5329 Pretty sure it is the opposite. The diamond reacts with steel at grinding temperatures, wearing the diamond. You can actually dress diamond wheels with mild steel.
@InheritanceMachining8 ай бұрын
I thought about hard turning as well. I might have to look into that!
@TBJK07Jeep8 ай бұрын
Great Job Brandon. Ebay is a good source for NOS bearings. I bought some Barden bearings for our surface grinder for like 40$. We used Kluber NBU 15 & some techniques learned from Robin Renzetti.
@InheritanceMachining8 ай бұрын
Thanks for the tips! I heard some good things about the Kluber grease but didn't do the research in time for this build.
@marshallwilliams40548 ай бұрын
lol. Love the title.
@keithbarron36548 ай бұрын
Should you apply load to check runout, those bearings would be reacting to each other's channels for rollers, maybe check with load against live centers, remove whipping.
@InheritanceMachining8 ай бұрын
Hmm... that might help actually. In the even they arent fully seated or something
@MikeGrimm-bk2lu8 ай бұрын
There's no shortcuts or failure in life. Only learning experiences.
@InheritanceMachining8 ай бұрын
well put!
@goransolheim87728 ай бұрын
Would love too see you do some stuff with a spindex
@crichtonbruce43298 ай бұрын
You and your wife's interaction was hilarious and delightful. Also: your photography is remarkably good. Enough with the superlatives. Enjoy winter.
@InheritanceMachining8 ай бұрын
😂 Thank you. Though I am not enjoying these 0F temperatures
@freestyla1018 ай бұрын
It was cool to see you graduate from copying morse tapers with an indicator to setting up the precise angle using trig. I recently did this as well for a collet chuck and i was very impressed not only with how accurate it is, but how easy it is once you get the hang of it. Well done bro!
@InheritanceMachining8 ай бұрын
Thanks! Though I've never copied MT's like that (despite seeing it as well) I don't trust the center drill in the end! 😂
@freestyla1018 ай бұрын
@@InheritanceMachining why do I have such a vivid memory of you copying a taper with an indicator? Maybe it was just an aesthetic feature…
@freestyla1018 ай бұрын
@@InheritanceMachining never mind, i misremembered it. I watched your tap follower video and asked if you could sweep a known good taper instead. You said you might try. Somehow that was twisted in my head. Long time ago 😂
@m4rvinmartianАй бұрын
*5:40** That was hilarious.*
@konstalehtineva52158 ай бұрын
I have been witing for so long for this and your videos are ao meditating and good
@kaylajason89178 ай бұрын
The Bob Ross of machining and hand drafting
@konstalehtineva52158 ай бұрын
yeah @@kaylajason8917
@Horus93398 ай бұрын
Good to see you back after the Christmas and New Year break. I felt your pain after seeing the dial indicators, hopefully you can shave a microtache off of it and make it good.
@InheritanceMachining8 ай бұрын
Glad to be back! And yeah I have a plan in mind. It's not a complete gonner!
@FusionMan-ev9yhКүн бұрын
I've been watching your videos for quite a while now. Love them! They are actually relaxing for me. My day job is as a Toolmaker. Keep them coming. Maybe try making a toolpost grinder at some point.
@Arthur-ue5vz8 ай бұрын
Just when everything was looking good - and you got distracted for a second or two - Mr Murphy shows up and introduces himself to us. If you didn't know, Mr Murphy's Law is: if there's any possible (or, even, impossible) way for something to go wrong, it will. Mr Murphy especially delights in having a little fun with machinists but he doesn't limit his antics to just precision metal workers. He basically loves screwing with EVERYONE! You can think of Mr Murphy as a sweet old Grandpa type that just happens to have a huge sadistic streak. Oh well, that's just life. You had fun making this beautiful device and now, knowing how it really happened, it's probably time to rename The Box of Shame as Mr Murphy's Box of Unexpected Sadistic Surprises, aka BUSS Box. ..😊 You probably sometimes feel like you're being singled out but rest assured Mr Murphy makes sure we ALL get attention from him on a regular basis!
@NHOrus8 ай бұрын
Burnishing tool to deal with microscopic cutting grooves from previous operations?
@outsider76588 ай бұрын
Hi. Nice work, as usual! You are making pieces of art. I, on the other side, got the parts, to my milling machine, from "Jerry;s". Only 2599 USD! Two small gears, and with only one place, to buy them from, Yeah, You get the point. Well, just waiting for the time, to be able to put everything in place. Keep the chips flying. I, and we, are watching. from a Finn in Diaspora
@Adrian-dv1sl8 ай бұрын
Perfect job👍🏻✌🏻. Greetings from a master mechanic 🔧⚙️🔩🔧 from Switzerland🇨🇭🇨🇭⚙️🔧
@postRMO8 ай бұрын
feel like this is one of the best youtube channels that came out of nowhere. Watch every new video religiously
@InheritanceMachining8 ай бұрын
Thank you 🙏
@MadMax-bq6pg8 ай бұрын
Your Missus don’t like your Chopper Reeves mo’????? Mam, you just can’t win! There just ain’t nothin’ better than having a mo’ like Chopper. Love ya work, I learn something about machining and engineering every time I watch. I don’t know if I’ll ever learn enough to get a lathe, but I live in hope…. Kind regards from Oz 🇦🇺
@PureNrGG8 ай бұрын
I don't know why, but making a new tool while using the old tool to make it will never not make me happy!
@InheritanceMachining8 ай бұрын
there is a sense of irony there isn't there? 😂
@PureNrGG8 ай бұрын
@InheritanceMachining I don't do machining, but I do loads of woodworking and less precise metal work, so I'm well versed in making better tools with the old tools 😂
@ttargetss8 ай бұрын
No Blueing of the taper to check the taper engagement? Morse taper reamers to clean tailstock are pretty cheap and quite effective
@Fincher1238 ай бұрын
I Watched this on my big "*Monitor" and this looks so great. Amazing Filming and Perfect Sharpness. This is mastered in every way to be Perfect. Thank you! Its a 42" Oled TV but i dont watch Tv =P
@rockspringswoodturner45028 ай бұрын
A rubber band around the outside when boring stops a lot of squeezing and some vibration.. great videos.
@malteser02128 ай бұрын
You mentioned a few times that you are not equipped for cylindrical grinding. But you know what you are equipped for (except for maybe a few inserts)? Hard turning. Hard turning can yield excellent surfaces and tolerances. The only problem I see: one's comfort zone. I am guessing that hard turning is outside yours. Try it, I dare you!😊
@roadshowautosports8 ай бұрын
I was wondering how you planned to have all that concentricity and precision when you decided to run it on centers, using your old centers, AND that milimetric precision mallet on the hailstorm 😂😂😂 but, hey, that guy on KZbin is the professional! Be quiet!😂😂😂😂 Love your videos!!! Thank you!
@mooreevair8 ай бұрын
HI IM GEORGE RONDRISKA managing editor of wood workers guild of America