Learn how to troubleshoot and calibrate your BMS batteries on iOS 17.4 View our step by step guide here docs.google.co... Purchase XCAP Connect www.injuredgad... Purchase XCAP BMS www.injuredgad...
Пікірлер: 44
@scottcorbett72424 ай бұрын
This worked for me although I had to run the flash twice for the battery health to correct itself. Thanks for the video
@4TMGames5 ай бұрын
So you HAVE to flash the device when replacing the battery now? Seems ridiculous, i mean if a customer brings their phone for a battery, you have to back it up and Flash it AFTER you replace the battery. EDIT: Not upset with IG, SCREW APPLE
@kingemanuel165 ай бұрын
Blame Apple 🙄
@4TMGames5 ай бұрын
@@kingemanuel16 definitely not blaming IG. Just ridiculous in general and I do blame apple
@kingemanuel165 ай бұрын
@@4TMGames yes and with every update and devices released they make it harder for technicians
@raultorres72305 ай бұрын
It’s Apple not us lol. It is what it is
@CapeCoralCellPhoneRepair5 ай бұрын
Thanks Crapple. At least we got a loophole. Hats off to Brad MC and Injured Gadgets!
@GeOxyFF4 ай бұрын
Hello broo Iam here to thankyou about the 8 years old video i know its quite late but in that video you showed that how to fix the screen touch and by the instructions you fixed my phone ..! Lots of love broo❤❤
@cikguhairul45364 ай бұрын
Thank you for your guide!
@johnjohn68532 ай бұрын
hi i have updated to 17.5 using new xcap battery with bulit in flex and now get unreconginized battery i have also used 3 u tool battery fix but still the same
@tommybirch973521 күн бұрын
Did you manage to get it working?
@A1PhoneAndTech5 ай бұрын
tried this on an 11 pro max today 03/09/2024.. unfortunately still showing same old battery health percentage from previous battery health. used both xcap battery cell and xcap no program tag on flex. not sure if its because we restored from back up but running ios 17.4
@bradleymcguire70465 ай бұрын
You used Quick Flash + Battery Fix ticked? What do you mean restore from backup?
@A1PhoneAndTech5 ай бұрын
@@bradleymcguire7046 in the video they portrayed an iPhone that does not have an active iCloud account signed in. Because quick flash erases all user data we did a back up both on 3u tools and iTunes for data. We attempted the normal tag on method of installing an aftermarket battery prompting not genuine battery pop up. Then installing new battery cell with original BMS with tag on flex powering on using only charging cord and non-genuine pop-up disappeared however, the same old battery health continued. We tried this method both before flashing using 3u tools and after flashing with same result. Important note: we did have to restore from back up to retain user data otherwise it would be a Brand new iphone essentially. We also recovered user data using both iCloud and local back up. Luckily, customer was understanding, but still very inconvenient and limited ability for the consumer. I have another 11 Pro Max and 12 Pro Max that I need to replace battery Cell while keeping OEM BMS so I will document that and see what happens
@TheToxiccPlayers5 ай бұрын
I have same problem, try to update the 3u tools and repeat flashing
@_B.M_2 ай бұрын
Once the firmware is flashed, being that it is custom firmware, will it prevent future ios updates? If not, then could a future update bring back the battery % issue?
@Televisionev4 ай бұрын
But service battery is still show service sms this method any solution
@bryanclose97802 ай бұрын
Hi, whats happening with iOS 17.5? Regardless of flashing using 3utools with battery fix the health stays the same. Thanks
@karlsfactorylabo92934 ай бұрын
Great video thank you. I replaced new cell with original BMS cable.(tag on , W09 pro) then i did flush wit use 3utools. battery health shown 100% but still remain "service" message. (Before shown 68%) Do you know how to fix? 12 pro , ios ver 17.3 ,17.4.1 and 17.5 was same situation.
@YangMuda_4 ай бұрын
for iPhone xr ios 17.4, do you to do it like in the video or just swap the old flexible battery for a new battery then use a tool like qianly or jcv1se?
@aryanthakur89595 ай бұрын
Thank you sir 🙏🙏
@eddyboy09115 ай бұрын
thanks man it's working 👍👍👍
@RedMissileGaming4 ай бұрын
This is starting to seem like a lot of work lol. It’s not working for me. Idk if there’s a difference between 3utools windows and Mac versions, but it’s not even giving me the option to flash the battery on the Mac version.
@jongarrett9333 ай бұрын
Informative guide but this did not work for me. Steps I took using iPhone 12 (original battery health = 'Service'), iOS 17.2.1 and XCap BMS Battery Cell with XCap tag on flex: 1. Perform BMS Swap. 2. Boot iPhone with power cable 3. Shut down iPhone. 4. Boot iPhone with side button, Battery health shows 100%. 5. Remove tag on flex and Boot iPhone. Battery health still shows 100% so all good up to this point. 6. Update iPhone to iOS 17.4.1 using 3uTools Quick Flash mode with Fix Battery health option checked. Battery health and 3UTools now report 81%. Retried the Quick Flash mode with Fix Battery health option checked and both still report 81%. Any ideas why this did not work? Does it make a difference if the original battery health was saying 'Service'. Should I have upgraded to iOS 17.4.1 BEFORE performing the BMS swap?
@bradleymcguire70463 ай бұрын
If you performed the health data Calibration before 17.4 then you could have updated as normal. The fix flash wasn't necessary with 3U.
@johnjohn68533 ай бұрын
hi I have the latest xcap battery with out welding the phone after the latest update 17.4.1 is now reading the original capicity and not 100 percent i have flashed it on 3 u tool battery fix it still reads the original capicity. i have also tried taking out the battery and tried another battery to get important battery message then inserted the new xcap battery that you dont need weld and it still reads the original capicity please can anybody help. are these batteries capatiable with the new ios 17.4.1
@yungTerro2 ай бұрын
Can we do it also on the 17.5.1
@jacksonsneed76895 ай бұрын
Quick question, if I replaced a client's battery on am earlier version of iOS (a few months ago), with an XCAP BMS, when they update to 17.4 is that going to break the functionality, taking their battery health back to the previous percentage? So should contact previous battery swap clients so that I can flash this update, or does this only happen when changing a battery on 17.4 and up? Thanks y'all! 🙂
@Zendarkos5 ай бұрын
Nothing will happen if they update, phones will behave just normal.
@sharmaxopАй бұрын
If iphone reads the boosted battery health U can do anything I t will remain on that because It will make analytic report after that which also included battery heath and tells the system that this is the recorded heath so I will behave like normal no health drop or change❤
@benjeremi98323 ай бұрын
How do you fix for Xr - xs max?
@iwontpullup3 ай бұрын
i just changed my XS max display and it's draining battery like crazy . Can programming the screen from the old one fix that ?
@rtafadar3 ай бұрын
That’s because your most likely using an LCD screen. The original is an OLED but as LCD screens have a backlight, it requires more power. Cheaper screens also use more battery consumption
@michaelv1984Ай бұрын
Yeah definitely sounds like you put in an lcd. If you paid less than $60 it’s definitely an lcd. I just went through this myself. I replaced the battery and display on my daughter’s iPhone 13 mini and I had 3 options; LCD for around $30, hard OLED for $50-60, soft OLED for $75-85. She’s 13 and could care less about oled, she even urged me to take the cheapest route possible and I was tempted but ultimately I didn’t because the battery in the 13 mini is so small I knew it would be a bad move to throw an lcd in there especially for a kid who isn’t as diligent about charging and uses a phone a lot out and about during the day. I sucked it up and went soft oled even though it was by far the most expensive. I couldn’t pass up the draw of the durability as she is rough on this phone. It’s her first and about two years old now. If only I can get this dang xcap connect to read 100% health instead of the old 74 id be in perfect shape right now. I’ve tried everything. Many time over
@rtafadarАй бұрын
@@michaelv1984Download 3uTools and quick flash the device. Make sure to check the box that says to fix battery health percentage. The phone should now say 100%
@juergenwest5 ай бұрын
What happens after restoring data from backup?
@cba_Jord3 ай бұрын
@Wassup-DocIs this true? So once the customer puts their data back on, it'll put battery health back?
@SHAHID.A.P3 ай бұрын
So need format
@neo16074 ай бұрын
Been trying this with a 12 Pro, tried 5 times and even tried another battery it just will not get rid of the non-genuine error Is there a glitch with certain batteries? Tried 2 different xcap connects just incase. Never had an issue with thus process until today
@bradleymcguire70463 ай бұрын
There's a communication issue between the OEM BMS due to connection or damage. That's why the message is triggered, it's not being detected.