Inlaid Cutting Board with a Forest Beetle "Billeschou" / BroinwooD / CNC wood inlay

Wood: walnut, maple, Osage Orange
How to find inlay parameters.
broinwood.com/products/how-i-...
Feed rate v bit 30ipm amzn.to/3Yux7Pq 👍👍👍
Feed rate flat nose 1/8 40ipm amzn.to/3OVNwtc 👍👍👍
For orders go to broinwood.com/pages/custom
Check out our Instagram page / broinwood
broinwood.com/
email: [e-mail]
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose (clean cut, long life, definitely recommend) 👍👍👍
amzn.to/3wf9Txg
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik.

[@Broinwood]

How to find inlay parameters. broinwood.com/products/how-i-am-finding-inlay-parameters

[@FabriceCHERRIER]

The video doesn't capture the difficulty of creating such precise wooden inserts. It's gorgeous !

[@michaelweller5470]

The machine did it. ???

[@scottbg1]

@@michaelweller5470 With respect, to say "The machine did it" is quite the understatement. If someone builds a house from wood, do you just say that 'The hammer did it?'. I am very familiar with this process and I can promise you that the designing, the drawing, the prep and execution are more time consuming than just hitting a start button on a machine. In fact, all of what I mentioned usually takes longer than the time it takes for the machine to do the carving.

[@oriolesfan2463]

Always the first video I watch when I notice it’s available. Hope you keep making them. These are hands down my favorite videos on KZbin!

[@timboone4755]

Beyond Amazing!!! Your art is inspirational!!! Thanks for sharing your talent and expertise!

[@BrianHPittman]

Absolutely beautiful. Being a Master Mason myself, I really like this one. Great job.

[@Broinwood]

Thank you!

[@grumpywoodchucker]

So so good. Never disappoints!

[@TatkoMarecki]

Best hanel ever !

[@MakerWorld]

Incredibly beautiful 😍 😍 😍......best regards from Switzerland

[@yeagerxp]

Awesome 👍👍👍Thank you for sharing. Take care of yourself, 🇨🇦

[@ericbardell496]

Beautiful

[@safon811]

Как всегда превосходно!!!👍👍👍

[@nitrojunkie22]

I love the look of osage orange, but that stuff is harder than trigonometry.

[@michaellevine6019]

A beautiful board Nik!!!!

[@YooProjects]

Great job as always 🏵️

[@GreenMountainEngraving]

Always look forward to these videos! Love the CNC work

[@cncwoodcrafofficial]

good job keep it up.

[@michaelmartin1835]

The amount of detail in that board is amazing. Nice work guys.

[@christopherbaum8463]

I always enjoy your new videos!!! They look great! I noticed you have used a couple of different cnc brands. I am looking at getting one and wondered which you like best?

[@midstaterustics4507]

Love your work, I always look forward to watching the videos from start to finish.

[@Sophia-uc9qh]

Absolutely stunning! Love the stickers on the machine!!

[@mrbill6768]

You should make some guitar bodys. 👍

[@swp466]

Your videos are always fascinating. I appreciate the extra detail you're showing. After you place the insert, are you relying on just setting it with the rubber mallet, or do you let the glue dry in a press?

[@bogdanpetrushko3425]

Amazing)

[@girlgotwood]

Absolutely Stunning as always. Sorry to bug you but what CNC machine do you use? I am in the market for a more robust one. Thx!

[@otherworldentertainment9511]

The one in this video is a Stepcraft Q series and I think he has a Axiom Pro as well.

[@girlgotwood]

@@otherworldentertainment9511 thank you so very much. I am stuck between the Axiom Pro and the X-Carve pro, so this helps a lot. Have a wonderful day

[@andreacerroni9010]

Hello, how are you with the cnc stepcraft? You told me you had serious problems with the axiom cnc. The plan had gone awry, right? Isn't it because you make quite generous passes of 6mm?

[@MarcDanielsMusic]

Love it !!! Wich spindle are you using? Sounds really quiet :D

[@Broinwood]

Thank you! Honestly, I don't know the model. I received it along with the CNC.

[@MarcDanielsMusic]

@@Broinwood is that the stepcraft m1000??

[@Broinwood]

q404

[@MarcDanielsMusic]

@@Broinwood uhhhh you have the Ferrari 😏😏🔥🔥

[@kevinrich4637]

Thank you for your videos. I notice all of your boards are end grain. Is there a ‘mechanical’ reason? Or can these in lays be done on long grain as well?

[@robert17todd25]

11:56 What is the name of the yellow-colored tree ?

[@laroast8531]

May I ask what type of wood is used with the yellow/gold color?

[@akbar5656]

its in the description

[@user-jn6mn8zc6h]

Класс

[@mrSanders.]

масонский жук?

[@michaelweller5470]

Wow. We’d all be talented if we had machines work for us. Not impressive. Pa lease