Marine Corps board. CNC wood inlay. BroinwooD.

Wood: walnut, maple, cherry, osage orange.
How to find inlay parameters.
broinwood.com/products/how-i-...
Feed rate v bit 30ipm amzn.to/3wf9Txg 👍👍👍
Feed rate flat nose 1/8 40ipm amzn.to/3izKXcF 👍👍👍
For orders go to broinwood.com/pages/custom
Check out our Instagram page / broinwood
broinwood.com/
email: [e-mail]
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose (clean cut, long life, definitely recommend) 👍👍👍
amzn.to/3wf9Txg
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik.

[@Broinwood]

How to find inlay parameters. broinwood.com/products/how-i-am-finding-inlay-parameters

[@helgenigma]

Your best work, man. Hello from Ukraine!

[@wingknutt1130]

We stole the anchor from the Navy, the eagle from the Air Force, the rope from the Army. And on the seventh day, while God rested, we overran his perimeter, and stole the globe. We've been guarding it ever since. Semper Fidelis!

[@mountainlightwoodcraft]

Ooh rah, brother!

[@robertgriffin662]

Thank you for defending me and my country.

[@mountainlightwoodcraft]

@@robertgriffin662 My honor, Robert.

[@jonathandehors2684]

Semper Fi

[@6666tank]

Semper Fi

[@6666tank]

And I am the proud owner USMC 66-70 Vietnam veteran Semper Fi And thanks again Brother

[@Broinwood]

Thank you, Mark, for your order. It was an honor to make this board for you!

[@miketadlock1786]

Thank you for your service Mark and congratulations on owning a work of art!!!

[@markp.9707]

🇺🇸🇺🇸🇺🇸Thank you for your service sir!!! 🇺🇸🇺🇸🇺🇸

[@6666tank]

@@markp.9707 mate, I was enlisted no need to call me sir :-)

[@brentncindy9023]

Thank you for your service. This is an absolutely beautiful piece of art work!!!

[@SirFency]

I always see people talking shit about cnc artists but they don't understand the amount of time that goes into a pice like this. This is fantastic.

[@maxxod1]

The part that is overlooked is how long it takes to make the design for the STL files. Even using an image, you’d still have to isolate all of the individual sections and then slice it piece by piece.

[@tomnorman5461]

Absolutely BEAUTIFUL! I would be more-than-proud to own such a MASTERPIECE!

[@Broinwood]

Thank you, Tom!

[@Valentin122]

The best board with inlay

[@Broinwood]

Thanks!

[@roy.h.barrett]

Fantastic! As a retired Marine, I especially appreciate this!!! Semper Fidelis. Thank you!!

[@jasonnoble2194]

Ive tried this inlay several times, and it is friggin hard. A lot of the smaller parts break off. And I also see you did it in 4 different steps(maybe 5). Ordered a cnc machine, will be getting it in a couple of months and will purchase your layout for the EGA. Thanks so much man for sharing your knowledge of all this!

[@nancej100]

Your work is out of this world!!

[@natesh999]

I have never heard of orange osage wood before. Looks really cool with walnut!

[@woodatuse]

Hell yea congrats on the stepcraft!!! You’re going to love it and their customer service (if needed of course)!

[@Raytenecks]

That detail is absolutely nuts!

[@thomasgcampbell]

That is ridiculously amazing.

[@amipow]

This is absolutely incredible work! Great job!

[@vocallocal7824]

Perfectly done! People always forget to show the full image in the end, not this time. Perfection all around! 👍

[@youngandwild1969]

Really awesome work Nick! I also have to say your background music is beautiful too! Adds even more magic to the already epic artwork ❤❤❤

[@Broinwood]

Thank you!☺️🙌

[@RossPotts]

Boy, that sealant REALLY makes it pop!

[@markp.9707]

Wow!!!!! Simply stunning work.

[@jerrymeasimer4573]

Semper Fi Just Great!!!!! A treasured piece Just got my cnc Looking forward to learning and one day do this , thank you

[@Critter145]

That’s one of the coolest woodworking pieces Ive ever seen.

[@mvilla4614]

Ok you absolutely killed that piece....Period 👏🏽

[@michaellevine6019]

Great work Nik!! I like the osage orange. Really pops!! Thanks for another great video....

[@Broinwood]

Thank you!

[@danglyreprap4206]

That's some ballsy milling my friend

[@kryptocake]

That's absolutely beautiful. Wish I could learn and do something like this...

[@jameymikels1886]

I was telling Woodcraft the other day.... with the adapter for the Festool Dust Extractor.... I would rather use the Bosch Sanders. Glad to see someone else doing this!

[@mothompson8661]

Very well done. I think it’s the best cutting board I’ve seen you make.

[@Broinwood]

Thank you so much!☺️

[@vampyrew0lf]

Amazing work as always 👏

[@dsmithhvac7027]

Absolutely incredible work

[@dennistaylor7655]

Stunning, just stunning!

[@msamyweber]

Beautiful, stunning piece sir, thank you. The time, effort, skill, craftsmanship to make something so personal and meaningful to Marines.

[@quesohusker]

Yes, but a large part of the satisfaction of creating art like this is the effort.

[@thedude4632]

One amazing piece of work !

[@blackcloud3361]

I've watched all your videos, and maybe I'm just a little bit biased, but that is the best one yet. Semper Fi

[@Broinwood]

Thank you 🙌

[@6666tank]

Hell yeah

[@MakerWorld]

Fantastic. I'm speechless.

[@ShaneMcGrath.]

Almost need to buy two of them, They are all always too good to use. :)

[@steve_weinrich]

Beautiful work!

[@number1beastielover]

Gorgeous!!

[@yeagerxp]

Beautiful 👍👍👍. Thank you for sharing. Be safe 🇨🇦

[@Rene1Henri]

Wonderful! As always, best regards from Brazil

[@FabriceCHERRIER]

Gorgeous !

[@mikakarpale]

Amazing work!

[@gousmc1983]

GORGEOUS piece!

[@Broinwood]

Thank you!

[@stevegronsky8904]

Gorgeous !!!! 👍👍

[@NavyDadProductions]

outstanding. Well done!

[@davidgomia3719]

Exquisitely Done. Very Impressive. Keep your content coming. Cheers from Papua New Guinea 🇵🇬

[@myronmagee8390]

Awesome work!

[@jarrettrice9112]

that's phenomenal

[@VLXVNDR]

Pure art.

[@largadeugnt]

Simply amazing!

[@gthmcty111]

Outstanding!!!!!!

[@marcelogomescastilho9468]

Awesome work Nik!

[@Broinwood]

Thank you!

[@brentncindy9023]

This is amazing!!!

[@TwoMooseDesign]

Great board and video 🙌🏼🙌🏼

[@Broinwood]

Thank you, Jef!

[@vincentdorsey8545]

Holy SHIT! That s a MASTERPIECE

[@birdbandit9]

Unreal dude

[@MegaWookie11]

That is truly amazing work. A credit to the USMC. Par mare Par terram brothers.

[@gpcoins539]

That is truly spectacular...

[@Broinwood]

Thanks 🙌

[@andrew9bernard]

So amazing.

[@benrudman3917]

This is next level cool. I bought your couese to try and dial in my end grain inlays. I’m getting closer… but having issues still with really detailed stuff. You don’t mention in your course how you set your plugs. I know you use the mallet to tap them in and your course said clamping pressure will affect results. What do you use? I have been using a sacrificial board and a bunch of deep throat c clamps because I don’t have a press. I appreciate the videos. You create some amazing stuff. -Ben Rudman

[@jamesalsup9135]

Excellent!

[@ARBWoodwork]

@broinwood you are the master

[@Broinwood]

Thank you! I do my best!☺️

[@jamespalmer8206]

I love your talent. You make fantastic art. Have you ever made a Games of Thrones cutting board? If not can you? (family sigils, the wall, Valarayn steel dagger, dragon, etc.)

[@bojangles5226]

Marine here, been wanting to make a project like this for myself for a while now ,but cant ever find good files think I will be purchasing these. Just as a heads up the DOD takes their seals serious especially the Marines, so if you plan on making these and selling them constantly you may want to get a hobbyist sellers permit. You can get one for up to 2 years if your making the items by hand as a "hobbyist" and selling them. Just a FYI for you. this is sick BTW

[@giorgiobenazzi8362]

Very well congratulations

[@mountainlightwoodcraft]

Superb work, Nik. I was a sergeant in the United States Marine Corp during Vietnam. I purchased your "parameters" course and have been making perfect inlay projects ever since. I would very much like to purchase the SVG or DXF files of this project so I can make my own Eagle, Globe, and Anchor. It would hang proudly in my shop. You have my contact information on file. Thanks! 😀

[@6666tank]

Semper Fi mate

[@6666tank]

Semper Fi mate

[@Broinwood]

Thank you, sir! I am very glad my course helped you! The file is also available on my website.

[@robbie6625]

@@BroinwoodCan the file be scaled up to make a larger board?

[@Broinwood]

​@@robbie6625 Yes, you can scale the file up.

[@ronmeador6531]

Out fucking standing work

[@gbrooks28]

OooohRahhhh. Semper Fi

[@Joe___R]

You might want to try using a fly cutter to flatten instead of the 1/4" endmill you currently are using. A fly cutter would drastically reduce the machining time for your projects.

[@robertgriffin662]

AWESOME, BEAUTIFUL!! I wish I had the $$ to commission one of these. How about the American flag with a Bald Eagle flying in front of flag?

[@zofo264]

Oorah!

[@6666tank]

OOORAH

[@1170jimmy]

As always your work is fantastic. As far as a cnc unit goes, did you just get the Stepcaft cnc? It looked like you were using an Axiom Pro in the past. I have been trying decide on the Stepcraft and the Axiom Elite for the same style of work. I'm guessing if you did get the Stepcraft recently, it was for upgrade in size and maybe accuracy? Thanks again for the great videos. Like I said before, it's nice to see the true potential of smaller cnc's.

[@AcrylicMemories]

Just Beautifull

[@ArsenioT.F.]

your work is wonderful and beautiful friend, I would like to work with you haha...I really like your country, greetings from Chile

[@Bergamot88]

This is the most American thing I’ve seen all day, and I’ve watched 3 videos about the president

[@rbdono2]

I'm curious, why not use a wider surfacing bit? You could probably cut those job times substantially. I'm assuming your CNC is trammed perfectly considering the quality of your work. Excellent work as always.

[@jamesbell3104]

Wow!

[@martinnali8104]

WOW!

[@johnolz1886]

Very impressive! As much as I’d like to say I could pull that off or have the patience, there’s no way! Just out of curiosity, what would you charge for something like that?

[@damoney1]

Hi Nik, GREAT work. Very cool. Q: any reason why you clean the surface with an endmill instead of a fly cutter?

[@Broinwood]

Thank you! Less dust in the shop and less chance of getting chipped on the inlay.

[@PSS_1]

Do you think it makes sense to divide one element into several parts to save material? I suppose osage orange is an expensive material. Have you thought about making this outer wreath from several half circles to save material?

[@rogercharlie]

Wow

[@cncworkswood]

Cutting tool used as an area cleaning too

[@mojorizn72]

Outfuckingstanding! Semper Fi! Subbed.

[@ceciliaescalante6181]

I am impressed by your work, I am planing in buying your tutorial on inlays... Question: all of your inlays are done in end grain, this is for good looks or also engraving into end grains leave a cleaner cut finish?

[@Broinwood]

Thank you! When it comes to making a cutting board, it's better to use end grain wood. Edge grain wood is more challenging to mill easy to get a chip

[@brycephillips8738]

wow

[@dawnbigwarfe6871]

How did you get that wood to be gold colored

[@ahmedhameed2025]

Creativity

[@alekseyd3146]

🔥🔥🔥🔥🔥

[@owenscustoms]

What type of cnc are you using?

[@screenwatcher6224]

Why did you go from your old CNC machine to this stepcraft?

[@tonyo6408]

Master o master

[@RaduIonita-t7m]

What model is the CNC Router?

[@mancandy8964]

기가 막히네,.,,,,

[@RonThompson-pugsly69]

Absolutely phenomenal craftsmanship!!! I have two brothers that are Marines. Would you consider contracting to make two of these for them? If interested, please contact me, as I would be very grateful indeed. Thanks

[@huntmasters777]

Sir what is price for cutting board one like this😉 just so cool

[@PSS_1]

Can Movingue replace the color /yellow/ osage orange?

[@Broinwood]

To be honest, I have never worked with Movingui, but it seems yellow enough.

[@RunicGamingYT]

How much does a CNC machine go for like the one you have?

[@Broinwood]

You can check the current price on the stepcraft website. My model is q404

[@iancrossley6637]

Adored by Leathernecks the world over.

[@rockyhoffman9132]

I thought I knew how to use my cnc router…..until I watched this.

[@TBL_stevennelson]

Who did you make that for?

[@6666tank]

Steve I'm Mark Dombrowski. The Board is now with me. USMC 66-70 Vietnam veteran Now living in Australia 🇦🇺 but still got my Stars and Bars Passport Semper Fi

[@markp.9707]

Mark that is an amazing piece!! Congrats!!!!! Thank you for your service as well.

[@6666tank]

Mate , Made for me. USMC 66-70 Vietnam veteran. Now living in Australia Semper Mark