LED Front Turn Signal Bulb Replacement On My BMW F30

In this video I replace the halogen front turn signal bulbs on my BMW F30!
PRODUCT LINKS
LED Turn Signal Bulbs amzn.to/37SmkoP
Exterior Modifications:
Carbon CS Style Spoiler Lip www.ecstuning....
Gloss Black M-Style Grills amzn.to/3ybhVJx
Smoked LED Sequential Mirror Turn Signals www.maxpeeding...
Carbon Fiber M-Style Mirror Caps www.maxpeeding...
Use DISCOUNT CODE: HallenBMW
For 15% off at checkout when purchasing on MaxpeedingRods website!
Smoked Reflectors for BMW F30 amzn.to/2RV0EDO
Carbon Fiber Front Lip (Suvneer) www.suvneermot...
Carbon Fiber Side Skirt Extensions amzn.to/3f2svuK
GTS OLED Style Tail Lights www.bavgrupped...
BC Coilovers coiloverdepot....
Performance Modifications:
CTS Turbo 4" High Flow Catted Downpipe (EWG) www.ctsturbo.c...
CTS Turbo Air Intake www.ctsturbo.c...
CTS Turbo Charge Pipe www.ctsturbo.c...
CTS Turbo Front Mount Intercooler www.ctsturbo.c...
BM3 N55 License for Flash Tune www.protuningf...
OB2 to Ethernet Cable (For BM3 Flash Tune) amzn.to/3balFAX
Any questions? Feel free to comment down below or message me on Instagram!
Instagram / e90hallenb
NOTE: Some links may be affiliate links, which means I'll earn a small commission if you make a purchase though the posted link. This'll help expand this newly started channel!

[@hobbsie1413]

By the way, there is a little panel in the fender liner that you can take out and gives access to the back of the headlights (was put there to make changing bulbs easier and so you don't have to take off the fender liner). It is held in by two push clips on top (push down and pull towards yourself), and then slides up and out and exposes all of the bulb doors.

[@InlineSixAuto]

Yes but from what I remember, that opening only gives you access to the low beam bulbs?

[@hobbsie1413]

@@InlineSixAuto I just did the swap today and it's a little awkward to get to, but that was the way I did it.

[@a9653192]

@@InlineSixAuto negative, just did the upgrade myself… didn’t even move the tires. The angle is weird… but definitely can access both turn signal bulb and headlight bulb through the access panel

[@robertrodrigueziii5304]

Does this method also work for 2011 328i?

[@hobbsie1413]

@@robertrodrigueziii5304 that would be an E90 chassis, which I am not familiar with but if you look at the front part of the fender wells there may be a small door that opens, again I'm not sure if they have that on E90s so you would have to look yourself.

[@Scotford_Maconochie]

I replaced the halogen bulbs on my F15 for both the turn signal and fog lights with LEDs. It was a $30 and 10 mins job to modernize the car a bit. Also, those dynamic/sequential LED is an Audi thing.

[@teo2263]

@François Parent Where did you find the bulbs for the front indicators? Is it the same led bulb as what he uses in the vid?

[@michaelalbrandt3341]

Where did sequential tail lights come from? Sequential taillights became a signature mark of a Ford Mustang on the 1968 Ford Mustang Shelby GT500

[@Scotford_Maconochie]

​@@teo2263Ali Express the bulb type is a PY24W. If you search there are dozens of LED available

[@Scotford_Maconochie]

​@@teo2263i bought them on Aliexpress and its a PY24W type. Unlike many BMW drivers i use those new LED so they have to be replaced every 2 yrs or so

[@JIBBOYZ]

Saved my ass thank you dude!

[@dgaoimages7384]

Upgraded to these same bulbs through this video and now I'm getting all kind of lighting malfunction, went and bought bimmercode + adapter to try and code it and still getting the malfunction plus flickering,( 2012 f30 modern fully loaded)

[@InlineSixAuto]

From what I've noticed, not all BMW react the same when it comes to changing electrical parts like bulbs. Some are just more sensitive than others and will react like yours. However some will not react at all. Mine still hasn't had any issues since installing these. Though it would flicker sometimes because of the voltage check but I just coded that out. You just happen to have one that didn't like the change. I would just reinstall your original bulbs and maybe try a different LED bulb.

[@KiNG-fr5ib]

it depends on the bulb quality too

[@jrcadoy]

@@InlineSixAuto can you pls put up a video on how to code the Led turn signal. What you use and stuff? Thank you

[@jgvolleyball2847]

What part # is the actual turn signal bulb socket holder for halogen headlights? I'm not having any luck finding it for halogen headlights, all i come up with is for xenon headlights. I have a 2013 bmw 328i xdrive. many thanks in advance.

[@IronHardAirsoft]

my 2014 435i socket looked nothing like that and the LED style did not fit at all...hmmm oh well

[@rex27samonte]

Man, nice car, thanks. Can you send me the link for your lift kits

[@hvvfu7043]

in my car it's like that when I turn on the turn signals, they flash quickly

[@colefender399]

Mine are the same way have you figured out why it does it

[@tisdue]

bad bulb replace it @@colefender399

[@masonwesterfield6984]

where did you find the black/smoked reflectors? or how did u tint/paint them black. the stock orange ones gotta go lol

[@InlineSixAuto]

Got them from Amazon. Got them linked in the description!

[@OfficialMatt03]

Why bother if you don't even use your turn signals?

[@InlineSixAuto]

what are turn signals

[@MrAditza95]

are they error free?

[@InlineSixAuto]

They are on mine

[@FelipeRodriguez-vx8ry]

My halo bulb went out how do I change that can ypu do a video on that?

[@InlineSixAuto]

The angel eye bulb or the low beam bulb?

[@kiakami3396]

Did it give you a code on dash ?

[@InlineSixAuto]

noo

[@gamehancer]

hi how to lock signal bulb with coding ?

[@InlineSixAuto]

you dont need to code anything

[@valentingvl]

if I choose to put LED, must it be coded after replacement?

[@InlineSixAuto]

No, if you put these, they wont have to be coded to function properly. However, the do flicker every so often because of the voltage check but you can code that out if you want

[@valentingvl]

@@InlineSixAuto after coding will it do the same?

[@InlineSixAuto]

@@valentingvl It will function with no flicker after coding

[@Streamlined955]

Isn’t part of the appeal of LED bulbs the fact that they will last much longer than filament bulbs?

[@InlineSixAuto]

Usually that's the case. But sometimes when they're cheaply made they won't last that much longer or less than the filament bulbs. At least that's based from my experience.

[@valentingvl]

what type of socket is it?

[@InlineSixAuto]

at what time in the video are you referring to?

[@valentingvl]

@@InlineSixAuto 4:03

[@InlineSixAuto]

@@valentingvl The piece the bulb is sitting in?

[@valentingvl]

@@InlineSixAuto yes, BA15s sau BAU15s?

[@InlineSixAuto]

@@valentingvl That was a part thats from the car.

[@acrdn2tc]

Did you have any coding issues?

[@InlineSixAuto]

Nope. However I am noticing that they flicker every so often which I'm assuming is a voltage check. I think that can be coded out though.