InMotion V10F Teardown (2021) - What's the build quality like?

Today we are going to take apart the InMotion V10F. In this video you will find out about it's build quality, how it's made and how well assembled it is. The inmotion V10F is definitely not an easy wheel to fully disassemble as it requires a multitude of screws and correct tools for it but a tire change is actually not that hard to perform. All in all the waterproofing seems to be on a very high standard as well as the water ingress protection into the motherboard area and battery compartment. It does use a lot of cheap philips screws that go into he plastic and these are also not that hard to damage. In spite of that the threads don't seem to have a lot of give and all in all the build quality of the wheel seems solid.
Similar content to Kuji Rolls, Alien Rides, Electric Scooter Guide, Ginger On Wheels, Jerryrigeverything, Ben Fox, Speedy Feet in 2021!
Visit my webpage to find datasheets and useful stuff:
wrongway.info
MYEWHEEL.com :
myewheel.com/ref/wrongway/
Coupon code: wrongway
Support me on PATREON:
/ wrong_way
Instagram:
@wrongwaychannel
email:
[e-mail]

[@augustleo7434]

V10 was my first wheel and I still love it. It may not have the highest top speed, but it is super nimble, quiet, good speakers, good headlight, fun LEDs and the tire provides one of the most comfortable rides. Highly recommend to any beginners or people who are looking for a great all around wheel.

[@vince7245]

I got this a week ago for my first wheel because I liked the idea of it being a fairly safe wheel. I can already cruise along quite happily, and so far I am very pleased with my purchase choice. A V11 would have been awesome to be honest, but it would have cost me 700€ more and I kinda wanted to see how I go.

[@BunnyslippersEUC]

I was going to DIY some stands from yogablocks and velcro. But now I am going to buy these flower pots for balcony and call it a day. V10f is build very very well. It doesn't look like a hackjob or a hobby project. I was surprised the battery sits on top. It's allmost impossible to get water in the motherboard or battery.

[@supercurioTube]

Thanks for showing all that! Good video. This is my winter: rain/snow wheel 👍

[@Andre-Mostert]

That does look like a well put together wheel. Thanks for sharing the info.

[@TutosBricolages]

Good video ! inmotion did a good job on this wheel, make the same video for one wheel from each brand! that would be interesting

[@4nlimited3dition_4n3d]

Yes!, this is one of the most important aspects of any review imo. Going through the actual build quality of the product. Just outside looks doesn't tell us much about whether a wheel is good or bad quality.

[@Kekafuch]

@@4nlimited3dition_4n3d I totally agree. I am impressed with the design of the speaker modules being symmetrical and how the inner case halves completely surround the battery and with silicone! Then the controller is also in its own compartment and not just willy nilly exposed behind a piece of exterior shell. That second compartment has me intrigued at what to fill it with :)

[@hhead56]

Thanks looks well made, you need it with all that snow.

[@HSterlingCross]

Wow. This is great! Mfgs/distributors should pay you to make a video like this for each wheel! Amazing video for your first, recent try on this type of video.

[@kmg501]

Thanks for the expose.

[@mr_wrongway]

Aye sir :)

[@kenspaceman3938]

Great vid, my v10f thanks you.😁

[@whileistillcan9338]

Yes please for the Tesla V2 teardown. I have the V2 with stock 1024 mah battery and would love to know what you think of build quality and any weak points that may need attention.

[@johnrichardson5089]

Man you killing it with that Viking beard. LoL

[@RobHitch]

The V10F was my dream upgrade shortly after learning to ride! 😊

[@kmg501]

I have a V10F, it is a great wheel as far as I am concerned.

[@4nlimited3dition_4n3d]

@@kmg501 Agreed. Been riding it for a year in all weather, rain, steep puddles, snow,... still working fine and hasn't cut out even once. Only overloaded a few times when trying to go over the top speed.

[@aia2735]

@@4nlimited3dition_4n3d what was your top speed limit on the inmotion V10F ? I don't feel very secure at 40km/h

[@4nlimited3dition_4n3d]

​@@aia2735 I have it set at 40. Haven't tried anything faster. Also, I mostly ride at around 20-30km/h. When going up a hill if I speed up too much (35-40km/h) it can overload and stop and tell me to get off. I do prefer that over a simple cutout a face to the pavement though.

[@andreyopohmelkin6026]

@@aia2735 it's totally secure

[@alainbibi0047]

Hey thanks for sharing, my V10 has 5625 miles and it's time to change the tire not the battery yet :)

[@user-tg6tf4ny2o]

Miles? So its 10000km ?

[@arevee9429]

Thanks again. Seeing this makes me wish I'd gotten the V11 instead of the RS19. This one looked better than the Tesla.

[@AndreiPetunin]

It’s good to see the two halves are sealed now. If only they did it on the first batches so that they didn’t burn to ashes in the middle of the night.

[@belzanti1544]

Hello from France and thank you for your very explicit video. When I turn stationary in place to the right or to the left, my wheel tilts forward or backward, this is not normal I think. Where is the gyroscopic sensor, the one that allows the motor to keep the wheel in a vertical position? Is there an exploded plan of V10? Thanks in advance for your answer and sorry for my English. Frank.

[@Adn4p]

Hey I just purchased a 2nd hand v10f with like 3 miles on it like almost brand new, but it doesn’t charge when I plug it in, is their supposed to be a light thats turning on when the charger is plugged in the socket? Even without being in the euc ? Idk what to do now is it the euc hopefully not.

[@danielerdofi9164]

Hi Adam! Can you explain what the differece is between the V10F made after 2020 summer and before. As far as I know pedals are different (rubber or sand papered rubber), but what is the technical differences - for example in the motherboard. Do you know what was the date Inmotion made the changes, developments? Thank you!

[@ernestsantos2147]

Would you know if I’m able to put some power pads on a V10f?

[@Kekafuch]

Thanks for this video. Now I love my wheel even more! Thinking what can I do with that extra empty compartment. Imagine if the charger can fit in there Integrated. Alarm/Tracker/DVR. Hrmmmmmm

[@tiaguerra7002]

Hello.question.on1 of ur video u had a hardydavison sound on ur euc.how?can I download that sound on my kingsongs16??

[@thierryleriche1196]

Summer is coming, it's hot, and my V10F starts to say "please get off". Maybe the ventillator is not good enought. What can I do ?

[@giggleherz]

We are going to take a peek inside, proceeds to dissemble the unit into the basic elements.

[@duncanoo]

Finaly You went to the barber

[@theg0ldkiller]

The difference in manufacturing quality between Begode and Inmotion is impressive. On the one hand we have a prototype, on the other hand a very well assembled object...

[@a.d.h.dn3d461]

I drilled holes right through the side pads so that I can unscrew it without removing side pads.

[@SuperGeert123]

Sounds interesting, can you make video ?

[@orna1377]

Sir please answer I got crash and one of the silver tin fiber in black wire of battery is separate, is that danger sir to ride again, I do check on diagnose in inmotion app is in good condition, what should I do sir I'm really scare to ride, is that safety to keep ride sir, please answer sir

[@yuryprokhorov6788]

Inmotion is the best in terms of built qaulity!

[@4nlimited3dition_4n3d]

I think Ninebot / Segway is still on top with the Z10. Pretty close though.

[@yuryprokhorov6788]

@@4nlimited3dition_4n3d True

[@kmalph]

I would like to see a teardown of the Tesla V2

[@mc-dq6oj]

The nylon screws for the pedal is for the friction lock. I wish all wheels use that instead magnets. Magnets are useless when you have jump pads.

[@duncanoo]

it is not for friction lock. For this purpose there is one screw under the pedal, (with blue glue on the movie)

[@mc-dq6oj]

@@duncanoo what are you talking about? The set screws on the bottom holds the pedal rod in place to prevent rotation. Then the nylon screws can squeeze the rod from both ends to have friction for you to fold up the pedals. Seriously, I own this wheel and disassembled it many times. That's how it works!

[@LaggerSVK]

@@mc-dq6oj yes I confirm. I though magnets are better because, the pedal just falls down when you give it a kick. No hand needed

[@GoG6138]

Despite your incorrect ideas about the V11, all of InMotion's wheels are high quality. Compared to Gotway they are in another league.

[@VladyslavKL]

☀

[@jantulak5285]

The motherboard cover is good, but it is not complete protection. Dust and water can (and will) get inside through the cable cutouts. Still, it greatly limits the amounts and the wetness I found in is probably just from air moisture. By the way, a new V10 looks exactly the same inside as far as I can tell. It just has different battery cells.

[@Kekafuch]

I think both these wheels have been out for a while and InMotion definitely silently changed some things to water seal this thing. I read that the V10 even came with increased capacity because the cells were the same price but InMotion never announced they just put in the better cells. Its confirmed the controller, motor is all the same. Just the battery.

[@bonjingversoza5058]

in which country that made?

[@peempiotrek7149]

Myśle ze ten film będzie mi niezbędny 🙂

[@Swinghi]

When do you attach the rocket motors?

[@mr_wrongway]

Not eco friendly

[@staffan78]

Lets say i have 3 kids, (8 ,11and 15 years) Is V10F a wheel they could practice on or is it still to big?

[@supercurioTube]

It should be fine, I briefly taught to some kids who were curious and asking to try and they had no problem. It remains a fairly narrow wheel which helps.

[@Anubis585]

Inmotion's build quality is why I chose them for my First wheel & V11 for my suspension option (Z10 is just to hard to get in USA). This booger is a beast for it's size. I would push it hard with my 230lbs, until I got cautious about my weight overpowering wheels. Does sound like a copy machine in "OFF ROAD" Mode. Cut 2.5" inches off the Trolley Handle and so much easier to use. Raises it from the brake light, felt it was to close blocking some visibility. I want someone behind to know my fat a$$ is stopping.

[@kmg501]

I suspect a heat gun would be useful for removing the pads without breaking up the adhesive.

[@BunnyslippersEUC]

I think the heatgun would damage the pads.

[@kmg501]

@@BunnyslippersEUC If used incorrectly yes. Otherwise the heat flow should be easily to moderate. All a heat gun is, is a more powerful hair dryer pushing air at a slower speed.

[@felixfranz2799]

Yes please do Tesla V2.

[@andreyopohmelkin6026]

Nice. You just did it a bit wrong. You should pull out other part of the shell, which is opposite to controller board. So you don't have to care about all the wires etc. And also plastic parts of pedal screws are for tightening the pedals as they are hold up by friction.

[@leucalyptus8072]

It is a good wheel compared to a nikola or a 16x?

[@mr_wrongway]

Different league ;) this is a smol wheel with less performance and range

[@leucalyptus8072]

@@mr_wrongway and compared to a tesla?

[@christophbrady]

Are these things safe to keep inside an apartment?

[@mr_wrongway]

Yup :)

[@4nlimited3dition_4n3d]

Depends on the brand and individual wheel.

[@christophbrady]

@@4nlimited3dition_4n3d im looking at getting the veteran sherman

[@4nlimited3dition_4n3d]

​@@christophbrady It's better than Gotway for sure, but it's not yet at Inmotion / Ninebot level judging from the problems I have seen people posting with some wheels. Still though generally it should be fine. I haven't seen a Sherman battery blow up yet or cause a fire. Just individual control boards frying in intense testing and a few battery BMS's acting up / needing replacement.

[@ukaszmalak6958]

Fajny sprzęt,szkoda tylko że wejście do ładowania jest podobne do tego co jest przy mikrofonie,jest mało bezpiecznie

[@mr_wrongway]

No trochę inny port czyli GX-12-3 ale faktycznie przydało by się coś innego. Dodatkowo fajnie by było jak by nie był u góry pojazdu tylko z boku

[@4nlimited3dition_4n3d]

The charge port is perfectly safe. It doesn't put out any voltage (0,03) unless it detects a secure connection to the charger. I just checked on mine again with a voltmeter. Port ładowania jest całkowicie bezpieczny. Nie wystawia żadnego napięcia (0,03), chyba że wykryje bezpieczne połączenie z ładowarką. Właśnie ponownie sprawdziłem swój woltomierzem.

[@jansvoboda9778]

Busted you meet illegal barber 😲. I sell my V10F under 1K Euro new owner be happy long time i belive. Because i own KS16x v10f lost purpose for me (im not Marty Backe) EUC collector :-) because KS16X is V10f on steroids. For MOST people under 100kg is V10F just ideal EUC is good all in one EUC just AVERAGE in good way. Ok climb ,Ok Speed ,OK confort ,OK convinient ,Ok trolley Ok sound ,Ok lights BEST weatherproof euc early 2021 Support Eucworld OK original app. Real life range 40-45Km (27 miles) . Not for speed demons, not power euc, not big cruser ,not aceleration ,not that hard overlean ,just Average most polished EUC so far for 95% EUC riders. After all this word i realize how mutch i miss my V10F :-(

[@Papalou1234]

WrongWay to re-assemble a v10f crack the shell a pedals hanger 🤦🏻 alot of screws indeed😂

[@rocelioaggalot7888]

The other side is empty, better if they change the handle to trolley type like V8 does.

[@Kekafuch]

I thought of this aspect but interior trolley is also a point of water ingress. i guess the 2 shells can isolate but really I see all the negative old reviews of the InMotion trolley, when I grew to love it. Its unique and exterior works!

[@gadgetman1588]

Higher quality then Gotway? I believe Gotway is the worst and Inmotion best.....

[@4nlimited3dition_4n3d]

Inmotion / Ninebot definitely at the top. Gotway is pretty much the lowest quality there is. But when it doesn't explode or cut out, it's also the cheapest and fastest with the most battery life.

[@felixfranz2799]

@@4nlimited3dition_4n3d plenty of reports of failing Inmotion EUC as well. Just recently someone posted a failed motor on 40 mile old V8F. Heard of plenty of cutouts and failures on V11 (someone I knew had the control board fry). V10 overheats on overheat hill.....So I don't think Gotway is any worse than the others, especially Tesla is rock solid - hardly any failure reports

[@4nlimited3dition_4n3d]

@@felixfranz2799 I was mostly referring to the overall build quality between brands. Take a look inside any Gotway and compare it to any Ninebot or Inmotion. I'm not saying any of them are perfect. Inmotion has plenty issue as well for sure, but Gotway wheels are the ones with consistently bad build quality and designs. They really should work on that.

[@Birahits]

still gonna shut down on long steep rides. Adam will not ride this wheel with his style. :)

[@4nlimited3dition_4n3d]

How steep? I've tried to climb every hill I can find with this thing and it didn't shut down. Although it did overload when I tried to go too fast up a steep hill. But if you take it easy, it doesn't seem to overload. At least with my weight ~70kg.

[@mr_wrongway]

I burned a V10F going up on a 30 degree hill or so. Indeed it cant handle hard hillclmbs and hard acceleration. Always when i accelerated hard enough on my V10 the pedała would just go up and bring me to a stop

[@4nlimited3dition_4n3d]

​@@mr_wrongway Did it like actually burn something inside or just overload and reboot?

[@mr_wrongway]

@@4nlimited3dition_4n3d I burned fuses on V10, V8F and burnt motherboard 3 times on V5F only IM I didn’t burn yet is V11 but I probably could if I really wanted to

[@TutosBricolages]

@@mr_wrongway you make the inmotion struggle with your riding style Adam 😂 The fuse is placed low enough on the inmotion 30 amp fuse as that only allows peaks at 2500w which is not enough

[@MitsubishiHondaAcord]

LOL hope you didnt break it like the v11 you mauled

[@bridgettewest4496]

First

[@exklimexklim]

Did you know that 99% of your followers don’t like Electric Unicycles? We here for the cool Electric Scooters....

[@KhanDisco]

That’s a very bold statement and very presumptuous on your part. I could care less about the scooters and I’m here for the EUC’s. Curious to see how other subscribers feel. I somehow doubt it will only be 1% that care about EUC’s.