Innova 3011. Do you want to know what each Icon mean for your code reader? Watch my entire video to get the full explanation. Visit my Merch store: mydiyjournal.myspreadshop.com/
Пікірлер: 46
@strollingbones-films2 ай бұрын
Hey man, thanks. Just the video I needed.
@carlosarturomendozarojas54114 ай бұрын
What is the USB input for?
@onearm58278 ай бұрын
thank you so much my friend
@MYPROJECTS101.8 ай бұрын
Thanks for watching
@jamesflores619 Жыл бұрын
Green light means ur car is ready to do smog and pass, the yellow light means the car is readin all the codes to see if the car is ready to go or not, the red means u have a code or a few
@nascar97783 ай бұрын
So he is wrong and yellow does not mean there is an issue?
@carlosmeza6439Ай бұрын
I went to smog my car and was told they couldn’t connect to car. So I went and a bought a scanner and it connected and gave me a yellow light. So I drove it till the cat o2 and evap stopped and I got a green light. So I’m hoping when I take it today it connects I have no check engine 0 DTC what my reader told me.
@MsBrivlogs12 күн бұрын
@@carlosmeza6439 did u pass n how long u drove it
@MrJwtaylor405 ай бұрын
My monitor status at top left; flash. Anyone know what that means?
@thomasspero2496Ай бұрын
Excellent video. I have a question for you. I have a 2012 Rogue with a MAF problem p01 01 code. The Nissan dealer replaced the MAF. I replaced the air cleaner. I did not replace the PCV valve yet. The dealer I go to tells me they cannot fix the problem any more than they have because they do not have a Master Technician??? I am going to have to travel a ways to get a dealer with a Master Technician. The engine light has gone on twice now. It is supposedly fixed now. If not and the light goes on again and the car seems to run fine I want to turn off the engine light. I purchased a Walmart Hyper Tough HT 100 code reader. It is not much on instructions. It connects with your phone via Blue Tooth to give an explanation of the code. I do not need an explanation and I just want to turn off the engine light. My question is, do I have to use the Blue Tooth feature with the HT 100 or can I just plug it to the plug in the car, turn the ignition to on, read the code, and push the red button to clear the code?? Thank you, Tom Spero
@MYPROJECTS101.Ай бұрын
Hi Tom, so sorry for getting back to you late. I had a Blue tooth Code reader once upon a time, but it was so long ago, I forgot how it worked. If you are still having issues with your light coming on, disconnect your car battery for about 5 minutes and then reconnect. That should stop the light to come back on. Keep in mind that if your car has the same issues or if it has another issue, your light may come back on. I hope my suggestion was helpful.
@LenaAudrey4 ай бұрын
Appreciate it
@MYPROJECTS101.4 ай бұрын
Thanks for watching
@joshuacooper552510 ай бұрын
Is this the same as the Walmart ht-100 when I look for user manuals and things like that for the code reader I have I can't find anything but there's plenty of information on the 3011 did they sell them to Walmart
@MYPROJECTS101.10 ай бұрын
Not sure of the unit from Walmart.
@SaltLyfe4 ай бұрын
What does blinking abbreviations in the top left mean?
@MYPROJECTS101.4 ай бұрын
Refer to your manual because it does explain them. I had to search for it myself.
@HASSANOIZE9 ай бұрын
Hi, can that innova clear srs code and airbag code?
@MYPROJECTS101.9 ай бұрын
Good question. I don’t have an answer for that one. You may want to call them directly to get the answer.
@sportclipz63582 ай бұрын
Are the monitor icons the ones that are currently pending or that have passed how do I know if I finished the drive cycle
@MYPROJECTS101.2 ай бұрын
You will need to refer back to you manual
@sportclipz63582 ай бұрын
@@MYPROJECTS101. well i see in some videos they are flashing mine are just solid icons any idea about that my friend actually just gave me this scanner but it’s the exact one
@randallrussell1268 Жыл бұрын
What does it mean when I plug the tool in but all it's says is error and nothing else.
@MYPROJECTS101. Жыл бұрын
If you turn on ignition without starting car it should work fine. It will even work if you start the vehicle, bur not necessary. However, if your Innova is reading an error each time, you may have a bad connection issue. Your Innova Reader may be bad or, your connector port.
@cyrusberry54427 ай бұрын
Mine won’t come on when I plug it in. Does it need to be charged because I have no idea what’s going on
@MYPROJECTS101.7 ай бұрын
No. This run off your vehicle battery.
@NickEllett3 ай бұрын
Change your cig lighter fuse then it will come on.
@jamaicansbuildingdreamhous1136 Жыл бұрын
Can I pass smog with yellow light
@MYPROJECTS101. Жыл бұрын
Florida doesn’t need it to pass so, not sure.
@noeperez28159 ай бұрын
sister
@bto19979 ай бұрын
How do u delete codes? Fixed the coil but the code still on
@JohnSmith-ns4gt6 ай бұрын
red button clears code
@ACTVRLADR11 сағат бұрын
It doesnt on my 05 ram 1500
@jamesflores619 Жыл бұрын
Ones u fix replace all the problems then erase the codes , the light will go from red to yellow and if is all good the light will turn green but u have to drive ur car a couple of miles for that
@jdmans8 ай бұрын
Yellow with no codes?
@jm-hs6hr4 ай бұрын
Drive cycle needed
@TheJune3019876 ай бұрын
Im haveing issues to connect the reader to the app. I saw in the video your bluetooth wasn't on. Wondering if maybe this modle doesnt connect.
@MrJwtaylor405 ай бұрын
No, this does not connect to Bluetooth.
@TheJune3019875 ай бұрын
@@MrJwtaylor40 🙏🏽 for takeing your time to respond. Blessings to you!
@bluestar94633 ай бұрын
Cleaned throttle body after P2101 code and "check engine" dash light went out. Tested with Innova and receive yellow light and 0 DTC display with all but 2 icons flashing. Pushed "erase" and got green light with 0 DTC. Test again and I'm back to yellow light 0 DTC with icons flashing. What am I doing wrong? PLEASE HELP!
@MYPROJECTS101.3 ай бұрын
It’s been happening to me also on other things. I don’t think you are doing anything wrong. After clearing my code, it comes back on saying the same issue even though it is fixed. It’s usually because of another problem or the same issue. Flashing yellow usually means pending.
@80sCrazyCatDadNGunAddiction10 ай бұрын
The guy at auto zone told me I can reset the ecu with this.
@trentstockton87579 ай бұрын
How?
@insanity5506 Жыл бұрын
If code erased (by accident) will it return? And about how long would that take?
@MYPROJECTS101. Жыл бұрын
Yes it will return but not as quickly as it should. Mine took about a week or two.
@catherinee.chaisson82209 ай бұрын
Do you have to drive the car a bit in order for the codes to return ?