INSANE 454 LS-7 RUNNING ON STAND NASTY BEAST MUST SEE WOW

[@adriannewman1322]

Sounds good I'd take it for a walk up and down the block

[@thomasgibbons353]

lol'n my ass off. Best comment in here.

[@dmitrypesko]

I'd fall over laughing

[@RYTHMICRIOT]

Reminds me of the lawnmower in the movie "Moving" with Richard Pryor and Randy Quaid. Randy Quaid plays Frank Crawford, the obnoxious neighbor who has a lawnmower powered by a V8. Check it out if you haven't seen it.

[@RoundHeadlightLife]

Hell yes! I definitely would lol

[@DieselDoktor]

Don’t take an engine for a walk… that’s how you have wild mechanics follow you home… then you start leaving 100 octane by your back door because you feel bad… Before you know it you’ve adopted a bunch of stray mechanics

[@jerrykeay5655]

I come from the side that wouldn’t call the cops , I’d call all my friends and say , Jesus man you got to get over here and hear this .

[@myfathersson7851]

The point when man discover 454 make fire ,bring smile ,make ears happy !

[@ROCONN508]

This dude is 100% legit.. That’s beautiful

[@jqsant5324]

One of the best engines ever produced. Early 70's best music. Can't stop listening to it. Sounds aggressive.

[@WindsEternal]

The 70's was an awesome decade.

[@mnwoodshop3877]

I’d rather listen to that than the radio or cd s.Thats what I call MUSIC to my ears.Love it.

[@jimfinigan1681]

Better than the crap they blast around here!

[@michaeljohnson4004]

That's the freaking best video I've seen in quite a while! Wow! I just want to give ya a shout out. Great times.

[@plutocrank]

9 people are women who think its too loud. I can go to sleep listening to that. Awesome.

[@georgejosephhaigh7725]

That loud sound is like listening to the best rock & roll band to us MOTOR HEAD'S & STREET RACER'S , Sound's Badass 🎶🎵🎶. 😈☠👍✌✌

[@offroadchamp1690]

Same

[@scottskinner577]

Salty environmentalists 🧂

[@msh6865]

Those 9 women also got pregnant just watching this video.

[@bobwire3310]

The People who Said it was to LOUD is Not a MAN ,........send deM "SKIRTS"😆😆😆😆😆😆🤣🤣🤣🤣🤭🤭🤭🤭🤭too Loud

[@greatwhitehunter420]

Beast....no replacement for displacement !!!!

[@jazzpup8288]

This put a real smile on my face

[@borborygmus5873]

This is the best New Balance advertisement yet.

[@davejalenderki]

That is nothing less than awesome.

[@Chevrolicious.]

I love that you used an old Sun tachometer on the stand

[@thatredchevelle8943]

Love it!! Got two ls-7s at home, nasty big blocks!!

[@johnnybravo7580]

Sounds like America. I can only imagine your excitement.

[@ceisarsrepair7958]

You now have the undivided attention of Every Male human in the neighborhood!!!!

[@Anarchy-Is-Liberty]

It's not the 70's anymore, this is the new millennia, good luck with that!! But there are a few of us old geezers still around!

[@ceisarsrepair7958]

@@Anarchy-Is-Liberty Yep, nowadays the sound of plugging in a Tesla for recharge gets the young geeks excited! 😂🤣

[@gprice932]

Bro your my hero! Every man 👀 just got motivated! That LS sounds GOOD!

[@dalemartinez6943]

Love the cam

[@deuceswild9415]

One badass motor for sure. So happy you never sold it. But I will glad to store it in 67 Chevelle for yea.

[@JordanSVT]

Not much of a Chevy guy but this sounds amazing. Love seeing how genuinely happy it makes this guy too! 👍🏻

[@markgutierrez7000]

The sweetest sound ever🚀

[@CALB2009]

@freakineagle~ Sweet sound to my ears! My Dad was 1/4 mile Drag Boat Racer. He built all his own engines for his drag boat. The one he built in 1980 was a Chevy 454 LS-7 (7.4L) bored out to 478, had a blower and ran on Alcohol Fuel. He raced in the "Blown Alcohol Flat" division. His boat was made by the HONDO company in California; it was a v-drive with cavitation plates and prop driven. He blew past 170 MPH in 1/4 mile with that boat, like it was a walk in the park!! There is NOTHING SWEETER THAN THE SOUND OF THAT ENGINE TO ME! Dad worked as a Master Tool & Dye Maker for John Deere for 31 yrs & Mom was an elementary school teacher. We lived in a little house with lots of neighbors who LOVED when Dad would fire up the engine when he was dialing it in before a race! :-) Neighbors two blocks away, still joke about how some of their pictures fell off their walls when Dad started the engine! HAHAHA! When Dad retired from racing, he sold the boat to a young racer, but kept the engine fully intact. It's been sitting in his garage on a custom made engine block, covered up with sheets and an engine cover for the past 20 years!! He'll soon be 83 years old and I wish to God I could get some help to set up a temporary Tach, Alcohol Fuel Tank and Battery ...like what you've done here! It would make my Dad so happy, he'd cry! Now I need to find a couple of people to help me figure how to do this for him! I am so happy I saw your video, thank you so much for sharing Hotrod Ronnie! ~~Christy~~

[@oldskoolfunk71]

That is Niiiiiiice Great sounding LS. One day I will build one. Great Job Great Build.

[@grantdavidson3539]

It's saying wish I was a mopar Wedge & had more power

[@mattg392]

That is a big block my good sir

[@michaelsettle1789]

Original production LS code

[@BlaztNbern420]

Me too man me freaking too God bless Merica

[@tucoramirez8397]

@@mattg392 The original 454 SS Chevelle in 1970 was coded as an "LS 6" not the same thing as a newbie thinks of today. It was a big block with solid lifters rated 450 HP from the factory. Probably more like 550 but they underrated because of new regs passed by the GOVT butting in with everything. That part we still have today the closer we get to socialism or flat out communism.

[@antwool6260]

Hot Rod Ronny.. respect first 15 sec. 🍻

[@KeepSycklids]

I’d say one of best engines on KZbin hands down

[@treaystrickland7697]

Love the engine, and definitely love the car behind it

[@christophergrubbs6169]

Nice we need more mechanical people like y'all

[@charlesrussell569]

Friggin awesome brotha!! I bet your adrenaline level is off the chart!! Congrats on an awesome job

[@GUMBYVLOG]

That's a bed time story right there, a *LULLABY* !!

[@Anarchy-Is-Liberty]

...and your coffee in the mornin'!!!

[@GUMBYVLOG]

@@Anarchy-Is-Liberty *AMEN!*

[@SweetFLGuy1]

I'm sure it sounds even better in person because I used to have a 454 big block with headers. Wish I still had it.

[@dinothedog4342]

I would put that in my truck bed and when someone pulls up with there music to loud, I would start that monster up wow best sound ever

[@tomlord5652]

My Uncle Jim built an L88 454 for his Mandela Racing Boat he bought back in the mid 1960's... He put it all together by hand. He later bored it out to a 468 and put a roller cam in it with a Hollie double pumper in it and it puts out around 700 horse power now. It's still one of the fastest boats on his lake. Nice engine my friend and nice and throaty also.

[@georgejosephhaigh7725]

That sound right there is like ROCK AND ROLL 🎵🎶 to us MOTOR HEAD'S & STREET RACER'S , badass myfriend 👏👏👍 😈☠👍✌✌

[@averybauman6307]

Nice, you got Guages,Battery, Fuel Tank and Radiator. All you need now is a Ricaro and a Steering Wheel. Take her for a Spin. Enjoy the Ride.

[@Sean-i4r]

Hearing lifters? Something, She's rowdy congratulations brother I love it

[@220Rick]

Love the video! Thanks Hot Rod Ronnie! You made an amazing set up there, looks and sounds great.

[@freakineagle]

Thank you Rick Short...

[@markbelanger7394]

now that's a guy that knows what the hell your doing on a engine rebuild awesome I wish you where my buddy awesome dude

[@claytammaro7060]

Motion Performance engines matter!!!!

[@mjlmbl]

Double thumbs up hot rod! Badass!

[@chele-chele]

Man, music to my ears! I had several crate LS7's in the mid 80's and ran em in a 69 Camaro. On break in the 2.25" headers glowed white hot on 104 low lead, reminded me of Smokey Yunick's tuning pictures LOL...

[@wildbill5670]

LS7. Square port heads, 7/16" push rods, forged crank with tuftrided journals, 7/16" Boron steel rod bolts, forged rods. All the cools stuff, oh and 454 cubes.

[@Cris-ic2ze]

Wish I had it for my 88 K5..Awesome👍

[@draculasgrl]

I'm still digging that 63 Chevy impala, I started watching your video's bro when you pulled er outta the woods, she's come along way since!! All you videos are awesome!! Keep it going! Never stop doing what your doing! Shot out from NM

[@freakineagle]

WOW...Thank you Draculasgrl.. I appreciate the nice comment and thanks for watching...Me & #CoupeZilla.

[@kelvenguard]

That's got be the Fastest Skate Board ever built :)

[@DistinctMale]

That’s a nice setupbHotrod Ronnie!

[@major1388]

Beautiful! Looks like it wanna take off wit the stand attached lol. I love it

[@matthewkaler823]

Love that sound.

[@gedungisphoopnuchle9121]

I'll bet your neighbors just love you!!!

[@danielives379]

Cant hear the neighbors yelling anyways! 😂😂😂

[@rooster68able]

Nice grew up a few minutes away from baldwin motion smokin 454s baby rockin one in my 1979 camaro "the hooker "

[@bravofoxable]

What a sweet noise, yessireeeebob 👍🏻

[@LowetheTechGuy]

Now that is music!

[@bobhoffman5581]

Coming home from my mom's family's farm one Sunday, 1971--we got stopped at a red light, on Grand River Ave, I saw a Harvest Gold '71 'Vette, with the L-88 type hood over the engine--it HAD LS-7 badges ON the hood. It was a test car, from the GM Proving Grounds, in Milford, Michigan. You should have HEARD the "lope" that motor had! The ONLY thing close to it I ever HEARD was the State Police cars from that era, with I believe a 426 (wedge) "Interceptor"--THOSE cars ALSO had engines with that "lope!" LOL. My mom had relatives who WORKED at the Grounds--as a kid, my uncle (test driver) used to stop by, in '66 and '67 Chevelle Super Sports, 4 speed, (Hurst shifters!) redline wide ovals, 396 375hp motors. THEY had "lopey" engines--didn't realize it as a 10/11 year old, the boys in the Chevy Garage had likely PUT the 425 hp 396 'Vette cams in 'em! lol

[@lobmin]

Sounds Real happy...good stuff.

[@latishanoble6395]

I had a four fifty four ont time in my seventy four montecarlo

[@intimidator.jb3470]

I Love the sound of a Big Block in the morning!! Especially a Tunnel Ramed, Big Cam monster w/headers!!!😍 I've got a LS7 427 aluminum small blk Vette convertible, it sounds good but not THAT good!! Not yet anyway......😉

[@raviolibandit8396]

Let's light this candle. Haha that's great.. you inspire me sir.

[@StoicMntScout]

Man I wish I could go to sleep with this motor running. It would beat the hell out of listening to my neighbor's clown music every night.

[@kensbackshop6399]

Your videos are awesome ,,,thats one bad ass 454 from baldwin ,,,i remember them back in the day with their vegas

[@freakineagle]

Thank you Ken.

[@draculasgrl]

I got a 454

[@freakineagle]

AWESOME...

[@brandonhewitt2386]

Sounded great! Nothing like the sound of a big block! I wish he would've idled it down to about 7-900 rpm instead of 1500 so we could really hear it hit a lick!

[@dougmyers6013]

Perhaps Baldwin used the LS 7, but they got it from Tonawanda Engine facility or Chevy parts. The engine was never used in any Corvette and was strictly sold as a crate "off road use only" complete from oil pan to high rise alum intake with a bright red placard taped to the intake stating the of road use only warning. @ 12.5 to 1, it was never a road use motor. Many of Baldwin's cars were based on the LS 6 & LS 5. Joel Rosen built a lot of strong hot-rods, having owned 3 at different times along with Yenko's but the only LS 7 I ever saw in a car was a buddy's 70 Chevelle SS 396 (402) and he built that car after ordering the motor from a local Chevy dealer in Ft.Walton Florida in 1976.

[@michaelbaker2011]

That beast has some growl to it

[@joeymartin518]

That is so cool Ronnie ...your are still the man...keep it up brother

[@freakineagle]

Thank you Joey Martin. Me & #CoupeZilla

[@mrlonslo6472]

That's a runner there 💪🏾💪🏾💪🏾💪🏾

[@t3chnicianb3000]

Now, I know most normal people would move to put that in a vehicle and run it ... I would keep that one 'ready to go' on the stand, to fire off when the mood strikes. Forth of July, New Years Eve, 9 p.m. on Pay day and I just got a new handle of Crown and I'm lit, etc. Peace

[@nicholaschichura724]

There they are.. the black new balance shoes.. that’s how you find an ol’ boy that can really build a motor.

[@Wotansvolk1972]

Think I heard that up the street, j/k sounds good man

[@bmdbigfeet1031]

Thx for that! Just made my day. I was hoping you would either turn it or move the camera to the back.

[@RichardCole1002]

That is badass brother! Hell yeah!

[@The88katana600]

sounds great !

[@kaelynnswink3368]

Love watching ur videos

[@freakineagle]

Thank you Kaelynn Swink...Me & #CoupeZilla

[@lelibelashabakabel8035]

Very nice,now build me one for my pinto 1975 runabout.

[@LJK69187]

Nothing like that Big Block Chevy rumble!!!!!

[@msh6865]

12.5:1 compression, huge solid lift cam, forged TRW's, square port heads with 2.19's (or 2.25's) and 1.88's, 4 bolt mains, 7/16 rod bolts and I'm guessing 2 x 650's sitting on top of that tunnel ram. That's about 700 horsepower and somewhere in the neighborhood of 625 lb ft of torque ready to get down right there. Every man needs to drive something with a big block in it at some point in his life.

[@1963impala2drWaylonWire]

good stuff man

[@alkennedy1124]

There is one or two lose valves, better check them before they jump off , that happened to my 454 , and it dropped a valve, and you know what happened after that, loll, 19 and 22 tho, koollove the sound , all but the one or two clicking sounds on drivers side bank, thanks brother thanks praise Jesus Christ amen. BigAl California.

[@jjmccloud]

Was thinking the same either valves or loose rocker arms in there lol awesome piece of work though 👏 that's 1 hell of a power plant

[@Bigrich0g]

I heard the same thing probably need rocker adjusted

[@marcmo7138]

Most likely a solid lifter camshaft

[@monzsterman]

the sound or LOVE!!!

[@chiefpontiac1800]

That would make one bitchin alarm clock.

[@davestinson5691]

I bet video does the sound no justice!!!!!. Looks amazing too

[@Anarchy-Is-Liberty]

Now that right there is a solid 290hp beast!!! wink wink

[@caryevans8598]

Sooooo cool :-) love it !

[@theophilhist6455]

Well I just found your sweet mill 4 years after you posted this. What did it wind up in? I can picture it in a classic 1934 High Boy.

[@lionelwells5618]

That needs to be in a '40 Willys Coupe!!!!

[@VicsGarage71]

Awesome video. I'm going to do a how to build an engine run stand on my channel. Need to get my 440 started every now and then during my restoration project.

[@bigblockkings1031]

I'd make a seat and a foot operated gas pedal and have it in my garage to make music anytime I wanted to. 👍😎

[@DeaconYomouf]

Put some wheels with that and drive it just like that....

[@dhouser1695]

That's 1 badass tower of power BBC nice

[@ricklesperance1401]

I sure wish I had one of them just to piss off my neighbor, a quarter mile way. Nice love it!

[@markallen6818]

That sounds BaaadAss.

[@craighall1547]

Like that engine stand! Pretty cool

[@DUN1231]

Got this motor sitting in a boat that sat for 3 decades previously up until 19'. Thing rips. Feel guilty every pull.

[@funnrun3399]

I went for a ride in my Friend's 67 Chevrolet Camaro he barely touched the gas pedal and its doing a Burnout just before we got on the highway it was Fast in such a lightweight car my friend is used to speed he is a retired fire chief and he rely going Fast to save live its red with a black int. Auto he is going to track race it this year he wants to see what it can do on the quarter mile

[@craigarmstrong5291]

God like MONSTER FANTASTIC!!!

[@Trebor-gw8lt]

Bad ass! Love the solid lifters! What cam is it? That bad fella must be big...idling at 1500.

[@freakineagle]

Trebor it is a Comp Cams .710 roller lifter in a stock bore 454 LS-7. Thanks

[@Yarddog464]

Nice job sound great. :)

[@karlk6860]

I owned and LS-7 and it was a small block 427 where does this " bib block LS-7" fit into the GM pecking order?

[@ronniewalters129]

With a rig like that you don't need a radio.

[@williamlopez4934]

Thats the biggest motor i ever see on 4 wheels!!

[@markbrynteson5141]

Damn it man! That does sound Nasty as hell

[@thegreatone582]

That's an awesome looking gocart. Dont be shy put a steering wheel on that, let's go...

[@coreyworden992]

Let em hear it!👌

[@roylcmke7841]

Motorcycle Ready! 💨