INSANE Car Exhaust Flames Compilation: Best NKE Flamer Kit Reactions

Insane Flames Compilation: Best NKE Flamer Kit Reactions
www.nkeperformance.com
Our NKE Custom Flamer Kits provide you with the flames you need for your car without damaging it.
Our kits are NOT connected to your vehicles engine, ecu or fuel tank
With years of experience making our NKE Flamer Kits you can be sure that whatever car you need one of our kits for we can make it for you.
GETTING RESULTS.
To get great results from this type of Flamer Kit some throttle techniques need to be employed. First the engine must be warm. Some cars will be able to create flames at standstill, usually done by gently revving up then letting the revs slowly return to idle whilst lightly blip ping the throttle, or sponging on and off the throttle in the mid rev range. Nearly all cars should see results whilst driving at speed, the technique here is to accelerate hard in gear and then without changing up, just let the revs get pulled down again, and as with flames at standstill, sometimes lightly blip ping tell throttle on the rev descent can achieve greater results. Basically when you let back off the throttle after a burst of acceleration it is the best time for excess fuel vapour to be released into the exhaust gas. Once flames are achieved the techniques can be perfect for great results.
CAUTION.
Ignition systems can involve high voltages emitted from the coil component. Please take care when handling this apparatus once connected to supply. This product may be deemed illegal for on road use in some areas. Please comply with local laws. Always use a fuse to the value of that supplied. No responsibility can be taken for anyone causing personal injury or damage to goods or property by negligence whilst using this device. Do not handle any of the kit whilst in operation. Please keep the module vented and clear of obstruction.
*Please note for better results this kit will require a de-cat and ideally a remap to work at its full potential, the more fuel in the exhaust gases the better the results as it’s the Exhaust Gases that ignite the spark, making the flame. Flames will NOT come out of the Exhaust just by pressing the On Button*
*It will not work with a diesel.*
FITTING
Please contact us before ordering and speak to Nick if you require fitting, on 07594 504434.
You will be required to come to our workshop address on a pre-arranged date