Inside Look at Harley Primary & Starter Operation | Solenoid, Starter Clutch, Starter Ring Gear

[@mickhall2894]

You just saved me draining my chainchase floorboard removal... On my 07 Electra Glide. I thought outer had to come off, at least for thrust washer like in shovels. Thanks! P.S. I'm getting a click only until I"TAP" solenoid with a screwdriver. Battery is full and load tested. Must be solenoid, yes? Thx bro'

[@Bionic_man09]

Man im in the same boat.. I think my starter clutch is going bad and I’ve been searching for hours for a clear answer if I need to remove my primary cover or if I can just pull the starter and replace the starter clutch.

[@MarkAmazingo]

Another great video from the LAB team. It's nice to see how the starter actually engages.

[@RyanUrlacher]

+Mark Arnold Thanks Mark for your ongoing support! U da man

[@sebcelvoyageurs]

Hey , need some tips , just change the clutch , that make me a New problème, bendix always touching the flywheel , dont want to pops in ?? I remove primary covert for better view , and i see the bendix is touching and spinning on flywheel ... wath is my problème ?

[@patrickbristowe406]

Thanks for another clear and concise video. your videos take away the fear of having67

[@RyanUrlacher]

You're lost welcome Patrick. I'm glad you liked the video. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids bro: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

[@dreK-47]

Why did it go forwards and backwards? Thanks

[@kaniwetini2784]

Hey there I’ve just replaced starter clutch on my 07 fatboy, have just finished putting all back together. & it is doing what is in this video the starter is being pushed out but won’t turn.

[@Golfhead22]

so why would I be getting grinding sometimes hen i hit my starter?

[@ryanbontrager5369]

Hay Ryan, my 07 road glide makes a horrible noise on start up and won't start. Any idea's and videos

[@rustygoodright6890]

Love you guys.... Great job on videos... Do you have one on replacing a starter ring gear on a 2001 fatboy

[@RyanUrlacher]

Not yet bro, sorry. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

[@bigwavecoralsllp]

I replaced my entire starter and it still makes the spinning noise similar to the one at the start of this video. Any suggestions?

[@jasperjones6962]

What are your thoughts about using small diameter hi collar split lock washers under the cap screws on Harley Davidson Motorcycles to stop them from working loose?

[@CaptainKWahl]

Did I just miss a Starter Clutch R&R ? Worried Shit goes flyin. Looking for some video. Brushes make me uneasy. Thks

[@Bionic_man09]

Hey man, if I understood you correctly, I doing need to remove my primary cover on my 08 ultra to replace my starter clutch, correct?

[@briangreer2914]

I've got an 02 wide glide that keeps sheering the teeth off the ring gear and pinion gear. what could possibly be causing it to keep doing this.

[@nswiss19751]

My 07 makes a horrible grinding noise during hot start sometimes any suggestions

[@joedees6463]

I got a 07 Softail Customs doing the same thing that you ever get any answers on the grinding noise on a hot start

[@JoshSanders1]

Did you get a fix for the grinding? Mine on 09 Fatbob does that sporadically. Thx!

[@nswiss19751]

@@JoshSanders1 I put in a drag specialty gear and did away with the compensator also new tensioner never had a problem since

[@HighHate]

Hi everybody! Please tell me what diametr of that starter ring?

[@jasonkav]

Just go belt driven BDL or Primo that’ll fix all the hot start issues embarrassing

[@rondunning4859]

I have a problem with my starter, everything engages but the starter ring gear doesnt move. It makes the same noise when solenoid hits like in the video but it wont crank the motor. Any ideas? Great video

[@RyanUrlacher]

Sounds like maybe a starter clutch. Here is a video we have on replacing your starter clutch. gumroad.com/l/harleystarter

[@rondunning4859]

Ryan Urlacher Hello Ryan the compensator went out of my 13 Glide with only 17,000 miles.

[@bobtailbiker]

The solenoid is engaging the drive but the starter motor is not turning the drive gear...possible causes are the starter motor is not getting voltage through the solenoid when it engages,starter motor,or engine locked up

[@dwaynewhite7848]

Ron DUNNING I replaced jack shafts spring and coupling on 2005 road king but works in termination it spins but doesn't turn out error everything seems to be coming apart at starter to jack shafts coupling I made sure it was put in with keeper towards clutch side what would cause it to not stay engaged

[@tjeco10ify]

Thanks 😃

[@RyanUrlacher]

No problem 😊 Ride safe & Ride Often! Check out this KZbin Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub

[@bobgwinn5091]

ty

[@RyanUrlacher]

U betcha! Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

[@djstevet]

Great video....helped a lot .

[@RyanUrlacher]

Thank you Steve. We're glad out video was helpful. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids bro: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

[@philgiordano1]

Question: I have a 2014 Fat Boy with the 103 engine. Over this winter I had SE 585 Cams put in, but now it is harder to start. Does that make sense? It still starts no problem but it sounds like it is struggling to turn over? Any ideas?

[@moearmendariz7022]

phil giordano.

[@jonathancoyne51]

phil giordano compression releases. you can get aftermarket ones that you flip open and closed by hand, it'll save you a few starters too.

[@caseyklein1590]

Awesome video

[@RyanUrlacher]

+Casey Klein Thanks Casey. We love hearing when videos are helpful to the biker community. Makes it worth putting them out! Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids bro: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

[@toddmlund4990]

thoughtful post🇨🇦🐢

[@markprivate_67]

First off, it's not called a "solenoid", it's called a "pinion gear" Second off, Calling it a " ring gear" is the appropriate terminology. It's actually necessary, it's what the object is called, please, stop being condescending to your buddy, he's just trying to help you.

[@gaetangalipeau3247]

Change oïl moteur

[@paulpatrie3068]

No need to remove oil tank.. just sayin

[@RyanUrlacher]

That's for another video. Search this channel

[@tntbbq85]

I have a 2011 road glide, I do not have to remove the primary cover to remove the starter ???

[@finley614]

No