We should stop buying Gotway/Begode until they provide significant improvements.
@electricunipsycho3 жыл бұрын
Not going to happen. They have said many times they will improve and the idiots buy them anyway. They will never improve as long as the ignorant keep buying
@matthewearl98243 жыл бұрын
@@electricunipsycho label me an idiot then. It's nice when someone puts an insult to an entire group of people...sounds like a certain political party. ahhh.i will just ignore the pessimism.
@euc_sharkman3 жыл бұрын
As being fairly new to EUCs, this does help demonstrate what folks have been alluding to when they say Gotway has bad build quality. It's a shame too because while folks rave about how the EXN performs (and the biggest enticement on my part), the thought of having to open up a ~$3k wheel every several hundred miles to potentially vacuum real dirt out of its electronics is preposterous to me. I'm guessing any hint of water is out of the question too. Gotway will need a few iterations on this one.
@ElectricUnicycles3 жыл бұрын
Regarding water, I would be generally cautious about riding any wheel in rain. But yeah, I would avoid riding this model through any deep puddles, etc.
@timrodriguez13 жыл бұрын
What a piece of crap. That was such a tiny little fall. Wasn't hardly any impact, and yet the wheel still lost its goddamn mind....lol
@dmsmoke2613 жыл бұрын
I received my EX.N in Oct 2021 and it is has many improvements. I too was worried about dust and the fan location, etc. However, the inside has been redesigned. I went on a long dirt road ride and the outside looked like it had been in Desert Storm. I opened the right side case (control board side) and was pleasantly surprised to have NO DUST!. I wish somebody would do a more recent video as this wheel is even more AWESOME with the redesign.
@ElectricUnicycles3 жыл бұрын
You obviously haven't seen my more recent video on the EX-N :-) See my EX-N playlist
@victoryvillain14713 жыл бұрын
Gotway the Italian EUC maker lol. Sexy, speedy, not meant for use lol.
@steveo60343 жыл бұрын
Gotways are like F1 cars- high performance but very delicate! Great video!
@RonnieRides3 жыл бұрын
You have a point, I don't drive my F1 car in bad weather either.
@ElectricUnicycles3 жыл бұрын
:-)
@willlawson61262 жыл бұрын
I have heard a lot of people speak very good of the durability of The Gotway Nikola Plus....
@rogerunderhill42673 жыл бұрын
Just opened up my V10 for a tire change. It’s fantastic inside 🙂
@ElectricUnicycles3 жыл бұрын
Inmotion wheels are a step up for sure. Unfortunately they don't make any wheels that compete with Gotway in performance.
@GGnext.crazycro3 жыл бұрын
@@ElectricUnicycles Psssssss BAAAM V12
@bigbadboogie68423 жыл бұрын
@@GGnext.crazycro Yeah the v12 seems like an optimal choice but for me, i need a ride this summer so probably a Sherman (ex.n. quality is to bad and price diff too small to justify a buy of something one needs to fix before riding). But next year who knows, france might move in :-) new 16" 70km/h ride is just what i want
@Nybravest9113 жыл бұрын
I recently opened my Gotway MSP to basically inspect the inside. This is after having it for 10 months. I'd say it was spotless inside and for the most part in good shape. I did crash it one good time but, no interior damage to report. Putting it back together was a bit of a challenge because of the gasket which came apart when I separated the shell. But, I fixed that with silicone and already have taken it back and forth from Westchester to NYC twice. Wheel of Torquetion I literally gain speed on steep inclines. I hope that Gotway steps it up. I have a feeling they will soon.
@ElectricUnicycles3 жыл бұрын
The consensus is that the MSP has been a great wheel. Mine continues to operate flawlessly
@markricharddavies3 жыл бұрын
Marty, thanks for this investigative work. I haven’t opened up my ex.n yet... I have to say that I’m really enjoying the ex.n, much more playful then the Sherman. The wheel moves out, I’m very impressed with it! It’s incredible..
@ElectricUnicycles3 жыл бұрын
Hi Mark. I can't wait to have my personal copy - love how this rides. The build quality is nothing new to guys like us :-) Enjoy your copy :-)
@Trener_Artem3 жыл бұрын
I laughted at the title more, than i probably should, considering i own a Begode wheel😅
@jawsilent133 жыл бұрын
Shhhh!!! Don't provoke it's blazing rage (Glances nervously at the RS in the corner)
@ElectricUnicycles3 жыл бұрын
LOL
@GGnext.crazycro3 жыл бұрын
@@jawsilent13 Psssss.... Is the RS Cold? Maybe you should tuck it in with a nice warm fire blanket 😅
@SirRolandSK3 жыл бұрын
I have opened up my EX.N as soon as I got it and made sure that those holes are ptched up. If you are good at tinkering i think one can do a pretty good job to protect these wheels. Its sad for me that this has to be standard procedure for gw wheels, but on the other hand I don’t think they would be that “cheap” with their kind of power.
@DontKeeptheFaith3 жыл бұрын
I've been riding an MSX 100v for a year. It's only got a little dust inside. It seems like Gotway just couldn't afford to keep making such a great wheel.
@electricunipsycho3 жыл бұрын
Or you got lucky lol
@jaredboulderterry39123 жыл бұрын
In my opinion gotway got worse when it became begode
@DontKeeptheFaith3 жыл бұрын
@@jaredboulderterry3912 Yes, that does seem to be the case.
@willlawson61262 жыл бұрын
I'm completely new to Electric unicycles and the entire world, but from the little that I have seen so far in my research wasn't Gotway/Begode the company who lost an engineer who went out and started his own brand and secretly developed the Veteran Sherman and released it? If my memory serves me correct on that, that could explain the sudden change in the quality of Gotway/Begode. Veteran came out with their first wheel as Top Dog..... and I'm pretty sure the Begode Commander was released as a direct answer and competition to Veteran considering the stats and even the aesthetic design and name of the Commander compared to the entirety of the Gotway lineup. Competition breeds excellence
@freshlycharged3 жыл бұрын
Gotway quality may be crappy, but at least they are consistent with their build quality!
@ElectricUnicycles3 жыл бұрын
LOL
@rcpete70553 жыл бұрын
I could not ride anything other than Gotway.. I've had them all and my daily ride is always gotway.. They are all rounders.. 👍 Sherman is just a straight line wheel!
@squidsleap3 жыл бұрын
My RS had wires over the center of the fan, just to make sure this would happen in a tip over! Plenty of wire slack left to move them out of the way gotway just put them there anyway, on a pice of double sided tape to make sure they would apply pressure to center of the fan shroud. It's crazy. To keep the dust out I had to plug the motor hole, tape over the trolley handle and add small foam pieces from a gas RC car air filter to the vent holes. But, as is tradition, the ride quality is 1st class!
@Nokkturnal79x3 жыл бұрын
I’m shopping for a 3rd wheel to fit in with my v11 and ks16s (wanting a long range higher speed wheel) I just can’t bring myself to buy a Gotway. Debating on the Sherman
@duperfastEUC3 жыл бұрын
Sherman, Do it! I went from v8 to 16x and now Sherman.
@econnak79093 жыл бұрын
Get the Sherman, absolute beast of a unit
@Kekafuch3 жыл бұрын
Went V8, V10F and now a Sherman. Second ride yesterday and it was a 100km loop. All from the original charge shipped. Amazing wheel. Sore thighs but worth it.
@Nokkturnal79x3 жыл бұрын
Alright you guys convinced me. Just put in my order with ewheels
@Kekafuch3 жыл бұрын
@@Nokkturnal79x 3rd charge. Almost 400kms. Really a good wheel if you like exploring. It’s a good package.
@YourAubsome3 жыл бұрын
My guess is part of Gotway's strategy is to constantly make better wheels and taking care of all the little details on the inside greatly slows down that process and increases cost. I think they willingly sacrifice the quality to constantly bring us new wheels that have incredible specs, and as far as they are concerned the strategy works because everyone buys their wheels and most of them are sold out right now. TI still hate the fact that my EX.N that I just ordered has some terrible quality on the inside that will likely cause problems at some point.
@ElectricUnicycles3 жыл бұрын
I think you are partly correct, but I don't think it's a strategy. I still believe it's a general incompetence and Chinese mindset of not caring about quality and workmanship.
@RobUKTH3 жыл бұрын
The noise sounded like a MAJOR issue. Relieved it was just a design issue involving the fan. Thanks Marty & Ride Safe! 👍😎🙏
@skykingjts3 жыл бұрын
wow Marty, That's pretty piss poor. You and wrong way have revealed some troubling issues. so you pay 3k plus for a wheel then , to be safe you need to open it up, take it apart, inspect it, fix it and prey it doesn't blow up while your going 40 plus. They should just sale it as a kit, so we can put it together correctly the first time.. Ill just buy another sherman while the bugs get worked out. I hope!
@v4v7773 жыл бұрын
yes... just like you say... they just need to sell it as a kit so we can assemble it ourselves... but of course they wont do that...they would loose huge profits.... buying each component separately the cost of buying would be reduced by a lot.
@willlawson61262 жыл бұрын
@@v4v777 I might be looking at this the wrong way, but if he were to buy all the components individually or let's say there's a core kit, but you still have to buy a lot of components to have a complete and custom build, you would end up paying more to build your wheel vs one that is already assembled. In the world of BMX any complete in the box BMX bike is going to cost substantially less than buying an after-market frame and then building it from the ground up.
@v4v7772 жыл бұрын
@@willlawson6126 This is not the case for electric vehicles... i build an e-bike that cost me around 1.500$ If i go to buy a factory made e-bike with the same power and range... im looking at least double the price of that.
@Born2Ride1083 жыл бұрын
Good discussion Marty.. Unfortunately it just comes with the territory when you own a BG wheel. You have to be prepared to service it and mod it to avoid all the issues of their BAD engineering practices. It looks like you did not open the shroud that covers the vent hole for the fan. I believe that is a major point of debris entering the the wheel. @rayrok suggests to put a vacuum filter over that opening which I have done and it makes a big difference in dust and dirt ingress. I suggest you do the same. There also is an opening under the motherboard that is not sealed and that also allows dust and water to enter. That should be silicone sealed. After this two mods you’re wheel will run cleaner. Thanks for the comments. I sure hope Begode sees this video and others and learns that they will eventually lose market share as other companies like Veteran challenge their performance level.
@ElectricUnicycles3 жыл бұрын
I did remove the rubber piece covering the heat sink and used a flash light to look under the shroud. I could see zero evidence of dirt in there. "Dust" might be coming in there but not the dirt.
@fishndive19613 жыл бұрын
It's not the side cover seal Marty. Take the cover off the heatsink and marvel at the massive cutout that goes into the wheel cavity. You could get stones in there.
@ElectricUnicycles3 жыл бұрын
I know :-) But I actually did look in there and saw zero evidence of dirt infiltration. In my case it's coming from the side panel - shell attachment area.
@TheRealAlpha23 жыл бұрын
Seems like they could do with some sort of rubber gasket on the inside rim of the shell to further protect it from the elements. But even then the thought that comes to mind every time someone opens one of their wheels is that it's like they shoveled a bunch of electronics into the shell, squirted a half tube of paste on top of it, slammed it shut, and somehow it makes for a nice ride. Then they turn to the camera and say "It just works... Don't question it."
@ElectricUnicycles3 жыл бұрын
Your description is perfect :-)
@frigidtsunami3 жыл бұрын
These companies should just hire ElectricUnicycles as R & D, tester, and inspector, basically quality control. I'm glad you do these videos, EUC fam does not have consumer reporting.
@ElectricUnicycles3 жыл бұрын
:-)
@DonovanWert2 жыл бұрын
Thanks brother 🙏 love your vids!! The best!!
@geekprices3 жыл бұрын
It's coming in from under the plastic cover over the heatsink, and also more then likely through the headlight holes when riding in wind. My rs gets dirts in weird places and also the holes in the headlight area
@douglashughes23313 жыл бұрын
Marty, percussion engineering in the field!
@JadeEyes903 жыл бұрын
I was gonna buy the EX.N, until I saw this. I now ordered the Sherman v2 👍🏻
@ullle663 жыл бұрын
You really should have pulled of the black pastik case....for some more horrific findings ;-)
@ElectricUnicycles3 жыл бұрын
I know what's in there :-)
@slidersgliders55163 жыл бұрын
Crap 👍 begode 🤔 begone soon if QC department don't change really soon . Awesome video 👍 Thanks for the heads up .
@FabriceDURAND3 жыл бұрын
I plan to buy a Nikola+ , it seems to me that it s the latest wheel from Begode/Gotway that is good in term of waterproofness and shell durability. Don't you think so Marty ?
@hyperxalloyfpspelinappaimi84473 жыл бұрын
Yes. I recently bought one. Love it
@ElectricUnicycles3 жыл бұрын
Yes, the Nik is a fantastic wheel. The MSP has always been a winner. But no doubt the round wheels seem the most durable.
@PlusSign2Day3 жыл бұрын
Exactly what is needed. Shell will act as blade guard. Zero reason GW didn't do this. They should have.
@mangu7683 жыл бұрын
Gotway's secret sauce is the motors. Quick acceleration and great torque i have zero concerns of a cutout when riding.
@ElectricUnicycles3 жыл бұрын
We should never have zero concerns of a cutout but I get your meaning :-)
@duperfastEUC3 жыл бұрын
Marty.. You should put some gasket maker along the whole shell and it will form a seal, plus for the fan if you could wedge two pieces of wood slightly protruding above the fan and just add gasket maker to keep it in place.
@ElectricUnicycles3 жыл бұрын
Yes, if it was my personal wheel I would do more work in this area.
@Jaaaaaaaaaaaaaaay Жыл бұрын
Seeing this a year later I think there has been much improvement since then. Hero, Master, Master Pro, EX20/30 all much better in terms of overall construction, though of course none without their problems :)
@duncanoo3 жыл бұрын
After Your modifiation, the airflow pressure can be lower than designed and therefore it can cause problems with heat. I think You should make new more upper located wall on the fan after cutting the old one.
@ElectricUnicycles3 жыл бұрын
I don't want to spend time doing work that isn't needed. If the wheel runs hotter than I'll make changes. If it doesn't, I won't :-) Thanks for the suggestion.
@kelseylantz19893 жыл бұрын
Id rather have 1 strongly and quality built wheel than have 10 mediocre wheels to pick from. Leaperkim only started in 2020. I feel like its a very good start. Quality over quantity every time. Especially since we're the people testing and pushing the limits of these wheels.
@darkstar44943 жыл бұрын
Huh? What’s leaperkim?
@neurokinetik64ES3 жыл бұрын
@@darkstar4494 The other name for Veteran. In fact, it's the only brand name you see on a Sherman.
@darkstar44943 жыл бұрын
@@neurokinetik64ES ok that’s a new one for me
@kelseylantz19893 жыл бұрын
@@darkstar4494 someone hasnt been doing their homework 😉🤣
@shanesplanetshane37953 жыл бұрын
If they're selling, no reason to spend more on them in quality. Its time for some competition for sure. Thanks for the vid!
@jawsilent133 жыл бұрын
This is exactly like the RS, I broke to fans already because of pressure from the side panels
@darkstar44943 жыл бұрын
@Supernova what happened when it overheated? Did it tilt you back? I overheat my nikola when I do aggressive sprints, I don’t think it’s the fans fault though. I overheat my v11 that way too.
@darkstar44943 жыл бұрын
@Supernova I’m confused, shouldn’t the thermometer detect the high temp and shut it down before it fries? Do you think the fan and the thermometer both malfunctioned?
@tommesshoo3 жыл бұрын
Thought this was the wheel to go for...until you opened it up....
@ElectricUnicycles3 жыл бұрын
Like I said, I'm still buying one. Although their build quality is bad from my experience most people don't have failures with their Gotway wheels. They just have the potential to require a bit more maintenance.
@bigbadboogie68423 жыл бұрын
@4:04 I agree, when veteran starts releasing lighter more agile wheels (veteran is a superb and very fast cruiser) im sure people will make a switch. I know i will
@skykingjts3 жыл бұрын
Good morning Marty!
@neurokinetik64ES3 жыл бұрын
Doesn't look like they used a groove with a seal the way they did on the Nikola. How do they manage to go backwards in terms dust and water ingress protection?
@ElectricUnicycles3 жыл бұрын
I know, right!
@sherryandpeter3 жыл бұрын
I have to add this comment. If that fan is sucking air in from the in side the housing and blowing it out that hole near the centre of the wheel for cooling then the whole housing is under a negative pressure and the air that being blown out needs to be replaced. Therefore all the air around the wheel is constantly being sucked in along with anything in the air otherwise you’ll have no airflow for cooling. The whole cooling system is based on air flowing into the housing from outside. That is air is filled with dust dirt mud moisture. They can’t have a waterproof wheel with the current design because they wouldn’t have any cooling. With the way they’ve designed the wheel they clearly have no intention of waterproofing.
@ElectricUnicycles3 жыл бұрын
Once Gotway started using fans, their implementation has never seems fully thought out :-(
@mornchillchill4125 Жыл бұрын
A loud fan is better than a quiet fan and burnt out the circuit board. Saw some brands, the fan is not loud, but the circuit board burns. This brand should have improved the wiring, and the fuses and seals on the wire's terminals are of better quality. Looking at the clip, not using the model produced in 2021, but the 2021 model still has a loud fan noise. Including the foldable handle that has not been improved to make it easier to hold.
@dougsuen19863 жыл бұрын
older gotway wheels dont really suffer from dust/dirt/water ingress. the new begode wheels, ex,exn,m pro, force air out of the wheel for cooling. this creates a vaccum inside the wheel sucking dust/dirt/water in from any air gap around the wheel. good for cooling, bad for everything else
@fredbaker90463 жыл бұрын
Thanks Marty was thinking about buying one of those. May as well be content with my MSP HT and Sherman. Oh when I been my knees I get a bad wobble what might that be, I've got about 500 miles under my belt? Thanks for any info.
@ElectricUnicycles3 жыл бұрын
Wobbles from bending down is common and will go away after more riding experience.
@fredbaker90463 жыл бұрын
@@ElectricUnicycles Thanks Marty.
@Mpower313 жыл бұрын
Marty, Is the build quality any better or worse than the MSX? I've been feeling like the latest iteration of gotway wheels seems like a step down in terms of quality and thoughtfulness. Am I wrong?
@ElectricUnicycles3 жыл бұрын
To be honest, I don't think it's fundamentally any worse. Seems about the same. And if you compare the quality to 3-years ago it's certainly improved.
@bartversteijnen10842 жыл бұрын
Gotway the Ferrari of the EUC world. You spend more time under it then in it…
@ElectricUnicycles2 жыл бұрын
In reality you don't. The vast majority of my wheels I just ride. Maybe there's some initial setup work to be done but otherwise they are mostly reliable. This is my experience of course. Your mileage may vary.
@deadbluesky3 жыл бұрын
when you buy a Gotway before running it you open the sides panel and put a thin layer of silicone in the grove then you wait until it is dry then you put your panel back, so you wheel will get a better ip rating, after 3000km with my RS still no dust inside !! To be honest i do work in electronic and the circuit is fine they use white gue so the connector will stay connected just clipping connector is not enough, capacitor on the side and wire who are shielded is not a big deal, i saw worst on a board from a Samsung tv or amp from Yamaha, Pioneer, Sony...etc and this is product which are not even moving.
@TheHDFatBoyGuys3 жыл бұрын
Agreed. Finish looks like crap. Considered replacing the fan?
@ElectricUnicycles3 жыл бұрын
This was the 1st generation EX-N and was a demo wheel for me. My personal copy of the EX-N is 2nd generation and the internal board & fan layout is different and better. Fan works great.
@eekenulv3 жыл бұрын
always a joy to watch ... would love to ride with you some day
@ElectricUnicycles3 жыл бұрын
Maybe one day, you never know :-)
@valentinlex79332 жыл бұрын
What is the normal temperature for this tire? I get to 68 degrees, is this normal?
@mrarrgeereaction64793 жыл бұрын
It's a nice wheel in fact of fun no worries, but these inside wiring.... No please No.... BMW have to make an EUC for sure that's building quality.... They have many to learn @ gotway. :)
@DJChrismaz3 жыл бұрын
Gotway...again and again... A reason I don't trust this brand. Thanks to show us the crap. I hope the makers will see your video, and will understand ... Build a lamborghini with Walmart tech inside is just insane, dishonest, and mostly dangerous for all. We ride just one wheel, we need extra care, this is not a toy, but a real transportation engine.
@scottsum13193 жыл бұрын
O well win some lose some. At least GW's consistent😳. I wonder if using some transparent waterproof caulking tape over the panel seams might help? esp for those in wetter climes🤔
@ElectricUnicycles3 жыл бұрын
If I had to ride in the rain, yes, I would tape all the seams.
@DardanAirlines3 жыл бұрын
Is the Veteran Sherman of any higher build quality (internally)?
@ElectricUnicycles3 жыл бұрын
Yes, the internals on the Sherman are solid.
@fredbaker90463 жыл бұрын
By the way I love my Gotway MSP really fun and I love the way they look.
@mikeintampa2503 жыл бұрын
Hi Marty, you are the Quincy of EUC riders! The fan sounded just like the Dremel, lol. Do you think you could have gotten away with just adding the cardboard instead of cutting off part of the fan cover?
@ElectricUnicycles3 жыл бұрын
Maybe. Hindsight :-)
@EUGUY3 жыл бұрын
They clearly don’t take pride in their work , if they did, the inside would look just as good as the outside with proper layout and thought. Their formula today is the same as in the beginning. Same type of case, same method for fastening, just new design. Since the early days, the wheels have mostly been updated in the software and extras on the electronics, the overall choice of components as layout looks to be very similar indeed. As long as people keep buying, nothing will change.
@ElectricUnicycles3 жыл бұрын
Well said :-)
@B1gLe03 жыл бұрын
Hardly any Chinese companies take pride in their work. That's just not their thing lol
@ElectricUnicycles3 жыл бұрын
@@B1gLe0 Agreed
@radicalhayabusa76813 жыл бұрын
I understand peoples feelings about the wheel and build quality but your getto fix as you so put it is a bad idea. The fan housing is designed specifically to blow down onto the heat sink to keep the board from overheating. By cutting out a piece of the housing you are allowing the fan to blow outside of the housing and not perform its job. This can eventually cause your board to overheat. If the fan housing is tweaked and a blade broken, then the only fix is to replace the fan. If Gotway will not send you a fan under warranty for defects in material and workmanship then I suggest picking up a new fan and replacing it, they are a common fan and not hard to come by. Please do not put out content that can create bigger issues for other EUC owners of this wheel. Thanks, I follow your content and most of it is pretty good.
@freeforester17173 жыл бұрын
I think that on reflection, it might have been best to try the wheel out with the addition of the card/spacer, ie before reaching for the dremel and butchering the casing of the fan, which is of course there for both protection of the fanblade assembly and direction of the airflow created by it. It seems more of a design issue concerning the tolerance of the casing width rather than the relative fragility of the fan per se, as seems to be indicated by the end resulting fix. “To the man with the hammer, every problem looks like a nail”, lol! Joking apart, it should be a simple enough matter for both Begode and Leaperkim to tweak their casing designs to accommodate the extra ‘headspace’ required to rectify their respective known tolerance issues, one millimetre added or subtracted here and there would make a world of difference, but in fairness to both companies, I think they are each willing to improve their designs to overcome such shortcomings, most of which have become apparent only after the real-world influencers put them through their paces, more often than not in pretty testing conditions, which is indeed as it should be. Great to realise this did not put you off buying an otherwise great performing wheel.
@GGnext.crazycro3 жыл бұрын
Begode could replace a part of the plastic shell like the sides with Aluminium. Add some fins on parts of it to increase surface area, and make it a passive heat sink eliminating the need for fan's. Using the outside air stream to cool the motherboard. Additionall benefits would be a potentially stronger shell. It doesn't even have to be the entire sides. It could be a Plastic / Aluminium element composite design. And for esthetics the Aluminium can be anodized to black if needed. Just use the outer part of the shell... why have a hole with a duct system on the inside of the shell close to the tire with potential for water ingress.
@GGnext.crazycro3 жыл бұрын
Honestly Marty. If i had a extra Gotway that would be my project mod.
@Roskellan3 жыл бұрын
Not sure I like your solution for the fan. The efficiency of that item will be very compromised. Could thin the fan molding a bit, then add a steel washer spacer (rectangular washer with a rectangular hole) over the fan area so any pressure applied by the cover did not bear in an area causing the problem. I presume the cover could take up the extra thickness, I appreciate any adhoc solution to be a compromise . Pity Gotway wont up their game building it right, it shouldn't cost more than allowing this sloppy workmanship.
@MikeMPharmaCyclist3 жыл бұрын
I agree that the fan will lose some efficiency but once it's covered again I think the difference will be marginal for this application... the cover will serve as the fan housing even if the interface isn't perfect and some pressure will be lost.
@ElectricUnicycles3 жыл бұрын
Yeah, I'm not super proud of my fix. This is a loaner wheel from EUCO. If it was my personal wheel I would have added a bit of aluminum as you suggest.
@Roskellan3 жыл бұрын
@@ElectricUnicycles Steel :-)
@thcaywkg3 жыл бұрын
..nothing surprising to me looking inside the New “Begode” EXN.. expect nothing more for what people call “quality built” this is a after all a Gotway from the beginning, a a hobby class high performance EUC that every rider go for. It will never be a Ninebot Z😁! and it need not be one. I think when one buys a Begode this design and engineering quality is considered the best one can expect. One should not talked about fit quality anymore and just take this Begode built standard the benchmark for ultra high performance EUC.. nobody is going to built it like the Z anymore because EUC patent belongs to Gotway! Be safe ride within yr skill☺️
@nyceuc26603 жыл бұрын
Hey Marty whats the tire size on the EXN?
@ElectricUnicycles3 жыл бұрын
20x2.75 - it's a huge tire
@wheelman69643 жыл бұрын
So the fan can stop working after a ridiculous drop and we'll never find out until it overheats and it's too late, dirt and water seeping through every corner, the cables and electronics is a nightmare, the hollow motor and the bearings haven't been addressed but we're still supposed to buy a gotway/begode because of torque? After the MSX it seems they lost all respect for their loyal riders...
@ZenLee3 жыл бұрын
my EX, quite dusty on the inside even on the board
@bigbadboogie68423 жыл бұрын
@16:39 air flow decreased A LOT. You might now see increased temp instead. The air flow is based on a full tunnel, of its cut the air just escapes. Let's hope gotway don't use this ghetto fix lol
@ElectricUnicycles3 жыл бұрын
It's all theory isn't it? Please quantify exactly what the decreased air flow be. I'm waiting??? :-) I don't think the wheel will run any hotter, but I'll let you know if it does. An no worries, Gotway won't be making any fixes :-)
@bigbadboogie68423 жыл бұрын
@8:51 you will change your mind when you see the speaker membrane in direct exposure of the dirt
@ElectricUnicycles3 жыл бұрын
My Nikola was speakers exposed to the wheel. Over 2-years old. They still work :-)
@jedhuang38173 жыл бұрын
cut side housing off is not a good solution as well. you may changed the air flow directions
@ElectricUnicycles3 жыл бұрын
I've seen fans with no sides. Air still moves front-to-back.
@GGnext.crazycro3 жыл бұрын
Gotway is like my EX .... Love / Hate relationship.
@ElectricUnicycles3 жыл бұрын
Yep
@JonS3 жыл бұрын
Like mine too. Looks good on the outside, but messed up inside and requires all-to-frequent maintenance.
@Duf3 жыл бұрын
Same crap, same company, different wheel......
@ivankapipkins36432 жыл бұрын
beautiful street wheel guaranteed 50mph insane torque
@Ukreefside3 жыл бұрын
I’d love to have a gotway but I want to spend all of my time riding not fixing…Especially with the uk climate. I love the aesthetics of the exn. Like a 16x on steroids
@ElectricUnicycles3 жыл бұрын
I spend an extremely small amount of my time working on any Gotway wheels. YMMV.
@benjie90613 жыл бұрын
can you give me a link to a video of changing exn pedals?
@ElectricUnicycles3 жыл бұрын
I don't have that video yet
@age_of_reason Жыл бұрын
I can't believe they actually allow this to be mass produced. I'm not going to buy any more Gotway/Begode wheels until they get their $**t together.
@SwitchUpYt3 жыл бұрын
Check out the latest Wrong WAy RS 2021 tear down the internals are MUCH better.
@DIVA-MC-73 жыл бұрын
not really.
@Sportinglogic3 жыл бұрын
I’m done with Gotway since 20018!
@ElectricUnicycles3 жыл бұрын
I guess it comes down to how you ride, but Gotway is the only game in town for a lot of riding styles. I'm glad you're happy with your other choices :-)
@DIVA-MC-73 жыл бұрын
Well finally the ride ISN'T everything anymore. To me people who keep buying gotways right now don't value their life too much. Too bad you only have one
@ceradinimp3 жыл бұрын
Gotway should just go open source, sell the components, let the buyer assemble. Would be cheaper for everyone and buyers could ensure a quality assembly.
@YASAJTV3 жыл бұрын
Now! the questions is does this crap worth over $2k or not
@ElectricUnicycles3 жыл бұрын
I am buying one :-)
@matthewearl98243 жыл бұрын
But why do i see in comparison videos it performs well and even the sherman keeps burning up? I don't feel safe with a Sherman the way I see them catch on fire all the time. After 2 weeks of solid research, this will not stop me from getting an ex.n. ALL the wheels have issues.
@ElectricUnicycles3 жыл бұрын
It does perform well. This video was more about the build quality. If you see my recent EX-N videos you'll see that they made some design changes which make it better.
@matthewearl98243 жыл бұрын
@@ElectricUnicycles ooh I’m sorry. I been looking at these for a while and this post just came up for me. I will look at your more recent videos. Thanks!
@RidershermanV33 жыл бұрын
Why should that veteran change something that's not broken 🤔 in a sense I know it's not perfect but it's better than anything
@johnnygovroom3 жыл бұрын
My son “I bet you Marty has long sincere goodbyes”
@leoenin3 жыл бұрын
First, I commented that GW is worthless garbage (which it is), but then I decided to elaborate my thoughts on the situation a bit more. When your wheel breaks up while you're riding it, for no visible reason, and it constantly happens across the whole lineup... it means that their Q&A is not existent. And engineering is just simply bad. The PEVs that rely only on electronics to balance you on a single wheel while you're going 40mph+ should be sturdy and reliable as hell. It's not that hard to make a wheel that performs well, but it is incredibly hard to make it safe and well-performing at the same time. My Nik+ recently just died while I was doing 35kph (I posted on Facebook about it). Fucking burned out. I got some road rash on my side, nothing serious. I am always geared up, fine. But my conclusion here is pretty simple: I learn on mistakes, mine or others; it doesn't really matter - if it's the wheel's fault and not mine, I don't use that brand anymore. I don't want to risk my health and life by supporting a brand that doesn't care about its customers' safety. Thank you for the video Marty, it just confirms my thoughts about GW and other brands. The good thing here that you weren't riding it on a public road. Stay safe.
@michaelbesler74693 жыл бұрын
I think Gotway doesn’t do better quality because you all still buy it fully knowing, so ask yourself who truly is at fault ?
@ElectricUnicycles3 жыл бұрын
When there are alternatives to buy then we will stop buying them.
@Ronin_Ryder3 жыл бұрын
Nasty insides for the exn and the same feedback is consistent across various exn videos 😓
@duperfastEUC3 жыл бұрын
they need to design a shell with the chip in it's own compartment sealed
@big_petebear85353 жыл бұрын
I know the feeling all too well.
@fire9501143 жыл бұрын
Gotway is dead to me. Especially after watching THAT video from Hsiang
@bigbadboogie68423 жыл бұрын
Do NOT ride in the wet until you fixed below. If you want to see the true nightmare, remove the mother board (huge hole into wheel well poorly siliconed) and also the plastic cover at the bottom with ZERO silicone, just an open hole into wheel well. In the next one i guess.
@JonS3 жыл бұрын
Oh, Gotway! When will you learn?
@CHI_dozie3 жыл бұрын
I Still like it
@brian_gonzalez3 жыл бұрын
“ it was the best of wheels and it was the worst of wheels”
@bigbadboogie68423 жыл бұрын
Before riding ANY gotway wheel, open it up and FIX IT 😖 YOURSELF
@electricunipsycho3 жыл бұрын
Their crap quality is old news
@MyLunde3 жыл бұрын
Please do not buy GotWay until they get better quality control. If you continue to buy their products, they have no incentive to increase quality control. GotWay: "Why should I care about how well they work, when they buy them anyway. As long as I sell more than I can produce. In addition, production capacity goes down with increased quality control. So f .....! Quality control"
@MetatronsCube233 жыл бұрын
dollar for dollar you can't beat the gotway wheels. They have more battery power, and motor power at the same prices as other brands. you can get a 1600ah MSX for 1550$.....nobody else beats that price and power. Or a Tesla V2 for 1200$ with over 1000ah, or a Mten3 with 460ah for 780$. I'm not sticking up for the EXN intake and fan design flaws, but most of the over 2000$ wheels seem to be experimental to say the least.
@MyLunde3 жыл бұрын
@@MetatronsCube23 You are absolutely right if what is written on a piece of paper is the only thing that determines price / value. But quality and service are not free. So if you only shop based on specifications, you will give companies like Gotway an incentive to take shortcuts with anything that cannot be listed in the specification.
@donscott64313 жыл бұрын
Honestly, I expected to see a dead mouse in there, with its head hitting the fan
@xeeded3 жыл бұрын
Awesome but undependable? Sounds like a KTM motorcycle.
@voltron51283 жыл бұрын
I wanna see a Baby Sherman.....something lighter and slimmer
@bigup77773 жыл бұрын
Good video Marty, I also think this exact same wheel has been worked on before by the previous tester before you , possibly disturbing the cable layout etc, so a not true representation of how it arrives from factory, just to bare this in mind kzbin.info/www/bejne/nWSwnmOXaN-Hl80
@ElectricUnicycles3 жыл бұрын
That could be the case, but Gotway's wiring is still generally a mess.