Install BrassCraft Angle Shutoff Valve DIY

This quick video shows how to install the BrassCraft 1/4-turn Angle valve. No major tools required to do so.
Here is the link to Amazon if you would like to purchase the shutoff valve*:
amzn.to/48pKkg4
Be sure to tune in to all our videos on this bathroom remodel.
We would really appreciate a thumbs up from you. Subscribing and pressing the bell helps immensely!
*As an Amazon Associate, I receive a commission for qualifying purchases.
#homeimprovement
#anglevalve

[@attsealevel]

Perfect instruction. Just purchased my home and found no shut-off valves in the bathrooms. Followed pretty much everything you did here (even got the pro-pack set of 5 angle valves - for economy). Project was real easy with your video. Thx whole lot!

[@YouCanDoIt2]

That's awesome! Nice work Mark👍. Thanks for watching and leaving a comment. Always appreciated.

[@kylehca]

Great how to video!

[@YouCanDoIt2]

Thank you for watching and commenting! Always appreciated.

[@richardl341]

Thank you for taking the time to make this excellent video. Regarding the tightening of the nut between the angle stop valve and the copper line. Should that be a half or three fourths or full turn after the nut is hand snug tight.

[@YouCanDoIt2]

Thank you so much for watching this video and leaving a great comment... truly appreciate it 👍. That is a great question....and, honestly, it depends. The BrassCraft has compression fittings with rubber washers. I've installed several of these with great success. Some require a bit more wrenching than others. A tip would be to make sure that the copper pipe is nice and smooth and free of debris prior to installing the shut off valve so that you have a solid connection.

[@richardl341]

@@YouCanDoIt2 Thank you for the valuable information.

[@antoniocaballero5607]

What is the rubber o ring that comes in the pack??

[@YouCanDoIt2]

HI. I'm not quite sure of the question you are asking. I by the contractor's pack that has several of these valves in a plastic container. There are no rubber O-rings in this pack. There are brass tapered rings that compression fit as you tighten the nut to the pipe. The braided water supply hose has a rubber O-ring that is necessary for making the connection to the valve. I hope this information is helpful. I apologize for not fully understanding the question.

[@antoniocaballero5607]

@@YouCanDoIt2 the pack that I bought has the the compression copper ring a rubber ring and like 2 copper washer, not sure what the washer and rubber ring are for

[@YouCanDoIt2]

@@antoniocaballero5607 That is very interesting. I think that I would be confused as well. It seems like you might be using a different model than the one that I installed. This particular Brass Craft angle stop only has 2 brass compression rings. There are no rubber washers. I'm sorry that I cannot be of more help. You might want to type in the model number you purchased and see if there is a video for that installation.

[@antoniocaballero5607]

@@YouCanDoIt2 thank you