INSTALL Heated Hand Grips & Thumb Warmer KIT | Pure POLARIS Sportman XP 1000 850

[@user-pj6pi5jd4f]

Nice video but you skipped over when you attached the heating element to the grips and the thumb warmer. Why would you leave that out in the video?

[@black_marty]

Just installed mine on my 2020 sportsman XP1000 eu version, great tutorial followed step by step. Nice content, you have to continue this way! Thanks

[@JohnFrancoNH]

Glad it helped. Thanks for watching!

[@terryheadgepath4205]

We used to spray the bar with hairspray to lube it to slide the grips on, then it dries and they don't move.

[@0661mike]

I just installed the odi vapor grips. I love them.

[@JohnFrancoNH]

Nice man!

[@0661mike]

@@JohnFrancoNH you were right about them. There pretty sweet.

[@jonhathaway2537]

nice upgrades. ill be doing all these besides the lift kit, adds wear to the diffs and axles.

[@kjmudge7929]

I just ordered my heated handle bar kit and new grips

[@JohnFrancoNH]

Nice man. You will love them. Thanks for watching!

[@DrChim_Richels]

Anyone tried to wire the thumb and handguard heaters into the same switch?

[@carlosbriceno9857]

Muchas gracias Jhon muy bien explicado me serviría para mi profesión saludos cordiales de España

[@kjmudge7929]

Thank you very helpful

[@JohnFrancoNH]

Glad it helped

[@kshields2]

Where is the best place to ground the wires? Thanks

[@JohnFrancoNH]

battery or bare chassis

[@pablitorentas4217]

What grab bar is in Handel bar ?

[@JohnFrancoNH]

Thanks for watching!

[@travlnchaz239]

Just curious why did you put the OEM exhaust back on?

[@JohnFrancoNH]

Got sick and tired of the excessive drone from the big gun exo when out trail riding, plowing & not being able to hear other riders speaking because i had to wear ear plugs when machine is running. The 2018 and up have the newer designed higher flowing stock exhaust. So removing the spark arrestor gives more bark. Much happier now.

[@1rieper]

What lift did you use for the 850? I have the same one and can't find one. They all say not for the arched rear arms. Also having a hard time finding wheel spacers. Thanks

[@JohnFrancoNH]

Highlifter 2" lift. My wheel spacers will be going on ebay soon.

[@turdsandwicher]

Hi john always enjoy your videos. I have a Honda HSS1332 just like yours 2018 model. It is stuck in free wheel mode. ( you know how you pull up on the two handles to release the track). Yeah its stuck in turn mode. On one side I can push the transmission arm forward and this allows the track to reengage and drive. Although if I pull the level again it gets stuck in spin mode again. The opposite side. I am not able to push the transmission arm forward. Without being too forceful. Any ideas what the problem could be?

[@JohnFrancoNH]

Never had that happen to me. But I would start at making sure the steering cables are adjusted properly.

[@turdsandwicher]

@@JohnFrancoNH ended up being covered by warranty. They said the steering cables were seized and replaced them. I kept thinking it was something to do with the transmission.

[@ryanmyette6576]

John - do you have a link for the ODI Rogue grips? All I can find are the lock/clamp on ones which apparently won’t work.

[@JohnFrancoNH]

Amazon links below the video. Thanks for watching!

[@MrRZRracer]

How are you enjoying the Rogue grips? Should I change or stick with Oem ones?

[@JohnFrancoNH]

The ODI Rogue are great but i have recent changed them to the ODI Vapor ones and i love them. Lots of cushion and still good firmness. Very comfortable if you do alot of ATVing. Thanks for watching!

[@MacNewlove]

Where you unplugged those square connectors do you plug them back in. I have a Highlifter I found those square connectors but they were plugged into

[@JohnFrancoNH]

If those connectors are being used then you will just have to wire it up right to the battery terminals. Thanks for watching!

[@MacNewlove]

@@JohnFrancoNH thanks man figured out the dealer used it for that my wireless winch remote

[@ScottieBMan]

Did this plug into factory ran wires? Also would it work with a sportsman 570? Thanks

[@JohnFrancoNH]

Yes there are factory accessory power leads in and around the battery. Thanks for watching!

[@ScottieBMan]

Well looks like I am buying those right now lol

[@JohnFrancoNH]

@@ScottieBMan What year polaris? Should be orange wires with white stripe right upfront near the battery.

[@ScottieBMan]

@@JohnFrancoNH 2020 570, your link on Amazon looked like they work on 570’s so pulled the trigger on them. Thanks for heads up on wiring, will refer back when I get them 💪🏻 I love the plug and play wiring stuff. I added the KFI winch...perfect plug and play option using all factory ran wire.

[@JohnFrancoNH]

@@ScottieBMan Those are the polaris factory ones. Worst case just strip the wires and crimp on a ring terminal and go straight to the battery.

[@pOOlarisking]

Not to knock you, but that insulation is useless when compressed like you did.

[@JohnFrancoNH]

yes i know what you mean but it still does something

[@slimpickins6164]

You totally missed the most important part. The wiring. Defiantly a useless video. The air gune trick is something every should know. But still, red wire here, brown wire there. You missed all that bud

[@JohnFrancoNH]

And thats what the instructions are for...

[@raywhite8122]

Your girlfriend? If she drives an 850, you need to put a ring on it.

[@JohnFrancoNH]

Yes i already have LOL

[@Jeepinwargammer]

Omg dude just shut up and get to it! Wasted a half-hour with rambling about everything but adding the heaters. Save yourself time everyone and find another video