Install K&N Aircharger Intake - Harley Davidson Street 500

[@Tony89]

Just installed this on my Street 750 and your video was 100% more helpful than the instructions provided in the box. Salute from NYC ✌🏾

[@katiek1720]

How is your bike running ? Still good ? Ever get it tuned with this ? I have a 15' 500 as well. Love this air filter. 😍

[@broke123]

Great video mate

[@TheLiftedOne]

Thank you for the video! Do you have any still photos of this bike online? I’d like to lower the rear and do a fender delete as well but would like to see a side profile pic of the bike. What size rear shocks did you use, 11”?

[@WaroengKopi]

TheLiftedOne Sorry I dont have it. Yes It’s 11”. Thanks

[@FrankiesWorld]

Thank you for this video! I just installed the tab slip on exhaust on my street 500 and next is going to be a performance air filter. Did you notice a difference from the screamin eagle air filter compared to the intake you installed on this video?

[@WaroengKopi]

Frankies World no worries mate. In term of sound, yes you can tell the different. But when it comes to performance, definitely you need a tune. I could feel the bike lost power in the high RPM before tuned. After a dyno tuned, the bike got more power and more torque all the way to red line 😊 so far my wife is so happy with the K&N filter with the look of it, the sound and the extra power 😊

[@FrankiesWorld]

Waroeng Kopi thanks for the reply. Yes I plan on getting this intake and am going to get the V&H FP3 tuner.

[@dmcki1209]

Looks good and sounds great. I think you definitely need to do dyno tune since the bike got high flow intake. You will damage the engine if the bike runs lean

[@WaroengKopi]

d mcki thanks for the advise. I will do dyno later since my wife doesnt ride that much. The bike only done less than 500kms since i installed the air intake

[@TOROINSURANCELLC]

Can we take it to harley to get this done?

[@rodolfosabater7781]

Why not just buy an Fp3

[@xbeastmodex3]

True always better to run rich over lean

[@rtubaguswijaya5607]

Nice for instruction details ... By the way what year of the Street XG500 ? And is it 57-1130 series of the K&N products ? Thank you very much

[@WaroengKopi]

rtubagus wijaya it’s 2015. The K&N serial number is 63-1130. Thanks

[@danniet9488]

Thanks for show how to install it. I will use your way to install mine.Do you have VDO of Rear LED light?Thanks

[@WaroengKopi]

Danaipong Suwannapong you're welcome mate 😊 I am sorry what is VDO? Did you mean video? If so, sorry I didn't make any video of it. Thank you 👍

[@playbackvideoimage]

At 8:33, is that tube the oil breather ?

[@WaroengKopi]

Yes it is

[@playbackvideoimage]

Thanks for this video. Helps me a lot. I think i will get the same air filter however i plan to route the breather to a catch can. Cheers.

[@WaroengKopi]

No worries 👍🏿

[@joshuathole4328]

After installing did u get a tune? Did the engine check light come on

[@joshuathole4328]

Hello

[@박경태-p7i]

Thx for your video. It helps me a lot. I'll about to change my one but i wanna know if there is a warp for that intake.

[@WaroengKopi]

박경태 yes k&n has one..

[@heytodd53074]

Love how youtube is doing back to back ads now lol

[@laionelbx]

where can I get the shock absorbers that you have street ? 🙏🏽

[@WaroengKopi]

BXM H I got this from Bad Boy Bobbers. I think you can also get it from ebay.

[@laionelbx]

Waroeng Kopi What is the name of the shock absorbers or what model is it? to be able to look for them 🙏🏽 For me street 750 .

[@kadebrown1848]

Is it made out of plastic or is that aluminum

[@WaroengKopi]

Kade Brown the elbow made from aluminium

[@johnangkasa6991]

Good video.... Btw rear absober brp dan turun brp inch? Bantingannya gimana? Thks

[@WaroengKopi]

John Angkasa salam bang! Saya waktu itu beli sekitar AU$180. Turunnya lumayan banyak, sampe 2". Kebetulan ini motor istri saya, jadi pas banget buat dia bisa napak kakinya 😃 bantingannya masih ok kok. Last week touring hampir 200km, istri gak komplain hehe.. Dia bilang malah makin enak dibelokan 😊

[@johnangkasa6991]

Waroeng Kopi makasih info nya bang.... 😬

[@Makinartz]

Great vid! Anybody knows if this aircharger fits xg750a streetrod?

[@WaroengKopi]

The engine looks the same, so I assume it will fit. Well just to be sure, you can check with k&n

[@Makinartz]

@@WaroengKopi thanks for the reply. How do you deal with rain? Does the sock help keeping water out?

[@WaroengKopi]

@@Makinartz honetly the bike never ridden in the rain 😅 I know it sounds awkward, but my wife only ride this bike on sunny weekend.

[@Makinartz]

@@WaroengKopi nice. Thank for the replies. Gotta get me one of those. Looks and sounds great 👍

[@mattmccauley5561]

Well the street rod is a different throttle body setup but I think they make one for it.the street rod has dual throttle bodies as the regular street 500/750 have a single

[@Wil-Moto]

Was that a stock screaming eagle or did you install it?

[@WaroengKopi]

Wil Cervantes I think it’s a stock because it came with the bike when i bought it brand new. Cheers

[@Wil-Moto]

Thanks!

[@paulsorbian2797]

Wil Cervantes - It actually looked like a stock xg500 air filter with only a Screaming Eagle cover. Can’t be sure of course. But yes you would definitely tune it if that’s the case. The V&H FP3 preloaded maps will nominate a exhaust, but as far as the air filter goes it only will be nominated as ‘High Flow’ so it doesn’t matter which high flow filter you have installed. You can download the FP3 app and it has a ‘demo mode’ you can check out.

[@tazsinthehouse]

Melbourne tinggal dmn bro? Masih ada Street 500 nya?

[@WaroengKopi]

Di daerah Werribee bro. Masih ada, cuman istri jarang pake 😬 lo di Melbourne?

[@tazsinthehouse]

Iya, deket, di point cook. Baru beli xg500 jg few months ago.

[@WaroengKopi]

Mantab 👍🏼 ternyata tetangga 😁 boleh tuh next time kita riding bareng 😎

[@tazsinthehouse]

@@WaroengKopi bole. Add insta ya.. uda request

[@chasechastain2569]

Good mesh cover for this?

[@WaroengKopi]

I ended up using K&N mesh cover. The screamin eagle is too big.

[@chasechastain2569]

@@WaroengKopi link for it can’t seem to find it. I emailed k&n but no reply yet

[@WaroengKopi]

I think it already discontinued. You might find it from third party seller (ebay or amazon)

[@anupamrohit5224]

Can I also get a cover for the air filter

[@WaroengKopi]

Anupam Rohit yes, you can check it through k&n website. They have one for it.

[@timsanders7632]

what exhaust is this? thanks

[@WaroengKopi]

Tim Sanders Vance & Hines Competition Slip-On

[@chickrider293]

Thanks for sharing this. Save me $$$

[@WaroengKopi]

chick rider your welcome

[@JustAnotherReviewwithAlek]

Are you in Melbourne

[@WaroengKopi]

Alek & Mj Adventures yes i am

[@JustAnotherReviewwithAlek]

Waroeng Kopi see u I. The road champ. Did u Dyna tune the bike since updating air filter

[@WaroengKopi]

Alek & Mj Adventures yes i did.. it got more low end power and torque. It feels like a different bike :)

[@DavidAdiv]

Thanks good video I have a question did you have any problems with the filter sticking out more then the original, And if yes is it in the way of your knees? Thanks

[@WaroengKopi]

David Adiv No I didn’t and I am 175cm

[@brandonplachno6868]

Just installed on my 2015 Street 500. Unfortunately now when I start it it dies on me, can anyone help in this matter?

[@WaroengKopi]

Does it start, then dies? Or it doesn’t start at all?

[@katiek1720]

Too much airflow maybe ?