[INSTALL] Milwaukee Extended Capacity Magazine For M18 FUEL Cordless Framing Nailers

Order Now At toolnut.com!
48-08-2745 30 Degree Extended Magazine
www.toolnut.com/milwaukee-48-...
48-08-2744 21 Degree Extended Magazine
www.toolnut.com/milwaukee-48-...
Milwaukee 48-08-2745 M18 FUEL 30-Degree Framing Nailer Extended Capacity Magazine
-Nail Lengths: 2" - 3 1/2"
-Nail Diameters: .113" - .131"
-Magazine capacity: 105 nails
-Bottom loading design
-Nail collation angles displayed on tool
-Bottom loading design
-Simple, quick installation
The M18 FUEL™ 30 Degree Framing Nailer Extended Capacity Magazine will keep you productive all day by increasing your magazine capacity to accept two full strips of nails. This means less down time reloading, and a more productive day overall. This innovative accessory is compatible only with the M18 FUEL™ 30 Degree Framing Nailer (2745).
Milwaukee 48-08-2744 M18 FUEL 21-Degree Framing Nailer Extended Capacity Magazine
-Nail Lengths: 2" - 3 1/2"
-Nail Diameters: .113" - .148"
-Magazine capacity: 83 nails
-Bottom loading design
-Nail collation angles displayed on tool
-Bottom loading design
-Simple, quick installation
The M18 FUEL™ 21 Degree Framing Nailer Extended Capacity Magazine will keep you productive all day by increasing your magazine capacity to accept two full strips of nails. This means less down time reloading, and a more productive day overall. This innovative accessory is compatible only with the M18 FUEL™ 21 Degree Framing Nailer (2744).

[@georgevritsios1998]

Video was exactly what I was looking for. Got mine changed up in 5 mins. Thank you brother.

[@toolnut]

Thank you!!

[@billsmith9249]

thanks for this video.... i just bought an extended clip yesterday for the same nailer I just bought a few weeks ago. The instructions are lame... it says to remove 3 screws. I DID remove 3 screws, but the wrong ones. I removed the first one you did, then the one further up the mag on the same side (was a little smaller) and the same sized one on the opposite side (same size as the first one). Removing those 3 DID allow me to take the magazine off but the new extended one would not fit.... so I chalked it up to being for an older gen Framing nailer and I was about to return the magazine until i saw your video! THANK YOU AGAIN!

[@jpdunamislodge]

I watched this video while researching this nailer and the extended mag option definitely helped sell me one buying one. I just converted my 20 to 22 degree with the extended mag. Took all of about 3 mins to do. It came with an additional screw and the new mad has an additional built in bracket that adds an additional attachment point to the handle base. Same exact 3 screw swap but the 20 to 22 has the additional attachment point. Super quick and easy upgrade for sure. Nice video thanks for the info 👍🏻.

[@oo0Spyder0oo]

They could have offered the gun with the standard or longer nail slide and just charged the difference. Having to pay full price for it is crazy.

[@rvscootin3457]

Thanks for a great video

[@estebanoures1]

When will the 21degree start shipping? Can't wait to get mine!

[@billsmith9249]

and FYI, I would like to point out, DEWALT model already comes with an extended mag unlike the milwaukee.

[@danielbrown8105]

Can you load 2 racks plus have the last unused nails from the previous rack? For the 30 degree one rack capacity version I have to unload the last 5 nails that didn't fire, then load in a new clip.

[@sugamedic188]

Has anyone tested to see if this fits Metabo? Really would like to know before purchasing

[@paulsantangelo9180]

Hi There, would you know how to remove the Magazine from the 2743-20? The Pusher failed and need to replace it. Thank you

[@dustingocus]

Having the single rack on mine has pissed me off so many times today

[@JF-fx2qv]

Holy crap! Don't get caught in states like NY with an extended mag. They may arrest you for to many nails.

[@jonothandoeser]

Haha, this guy is another reason why KZbin is where everyone goes for instructions!

[@andyloucks]

I imagine you didn't get this kit, but I'm curious if the tool with the extended magazine will fit in the included soft case now.

[@jpdunamislodge]

My 20 to 22 degree fits with the extended mag. The tail of the mag sticks out but that’s fine with me. Bag still holds and carries the nailer.

[@colekidd2]

This looks exactly like the metabos. Do you think it would fit possibly on the cordless metabo?

[@sugamedic188]

I’m curious if it would fit a Metabo also.

[@colekidd2]

@@sugamedic188 It doesn’t. I have them both now. Metabo would be a game changer if it had one though.

[@sugamedic188]

@@colekidd2 damn…I guess I’ll have to try and find a busted 21 degree pneumatic and harvest the magazine from it then. I have seen that conversion work.

[@colekidd2]

@@sugamedic188 i tried that with the newer models magazine of the metabo framing nailer. Wasted 100$ it has to be that one from the video specifically

[@sugamedic188]

@@colekidd2 good to know. Thanks much

[@Tazanthro]

Is that legal in California?

[@DangerClose805]

No felony

[@timothyferrante486]

Do you know if dewalt has an extended capacity mag?🤔

[@toolnut]

No, they don't.

[@oscarbarrera6924]

Would a 30 degree megazine fit onto my 21 degree nail gun?

[@dirkdiggler5525]

apparently they can with a little mod. I'm trying to find that out exactly myself

[@tleonard410]

I saw this on clearance at the local home Depot for $25 . I'm gonna pass though after doing some research the gun is already heavy enough and it's just pure laziness to just slide another strip in they make it easy enough

[@culiacansinaloa3432]

@The Tool Nut the 21 magazine fix on the 30 degree?

[@toolnut]

It will not, the angle, where magazine connects to the gun, has to match the magazine. 30 with 30/21 with 21

[@culiacansinaloa3432]

@@toolnut the gun has tread nut for both 21 and 30 degree ,I ask because in that case can I buy the magazine one and switched when is needed

[@brianvanheck3133]

The Tool Nut dosent the 21 use a differnt hole than the 30. Which make the right angle

[@GaVR3]

Culiacan Sinaloa I think they do fit but just a thought if you notice both 30 and 21 guns 2 head bolts run straight down plus both guns have 2 different screw brass base on different housing angles on the one screw holding the middle of magazine so I still skeptical I want to try it already have the 21 but will get the 30 eventually and will order 30 magazine and will try on the 21. Unless @thetoolnut has already physically tried on, am I wrong? Both guns has bolt brass base for middle magazine plus has both angles built in gun housing

[@GaVR3]

The Tool Nut hi have you physically tried it I’m still skeptical, each gun has 2 bolt brass inserts plus both angles build in gun housing for the middle of magazine

[@Frankie431]

I was so pissed off when I found out about this extended magazine. Fucking joke. Made me want to get a different brand.