Install new LED in your Cluster

[@hyltonvaneden1273]

The instructions are easy to follow.Thankyou for the video.

[@kosatka6980]

Kako se skida LDC, i koliko je diodica ispod tj za njega, dal bi se zamarao da se posle duze voznje nista ne vidi, ovo u bijelo je perfekto ispalo svaka cast!

[@96garage]

Ne mozes ga skinuti u potpunosti, ima ova kao kontakt traka zalemljena za njega i plocu, da se sam otkacit i sklonit u stranu. Ne sjecam se koliko ih ima, mozda 15ak kom, isto su 3528 kao i ostale. A to da li ce se vidjet ili ne, to je do displeja. Hvala :)

[@каллибр152мм]

Не могли бы вы показать схему работы зуммера в приборной панели при выключенном зажигании. Она задействована с кенцевым выключателем двери или нет?

[@probimp]

Hi!! I want to thank for your excellent video. It is clean and very helpful. But I have another problem with the computer screen. It went black a year ago. Can you tell me how to replace it and the reference of the piece? Could you include that job next time you fix some leds? Much questions 😅 but you are a master…thanks in advanced😊

[@96garage]

Hi, thanks bro. Not sure about the screen. It could be that the diodes are dead or the screen. You can disassemble the cluster and see under the screen if the diodes are working. I never done on the screen so i can't help u so much.

[@probimp]

@@96garage all right, copy that, sir!! Thanks for answering I will do as you say. I’ll tell you 😉 Thanks a million!

[@frac3620]

Hi, sorry, can I ask you which PINs are needed to test the bench lights? I hope in your answer

[@96garage]

Hi friend Just watch this video and u will see it kzbin.info/www/bejne/oXjUlHxnmpabbLMsi=wNIYfXbs35mJuoDx

[@frac3620]

@@96garage grazie

[@SAED_ASAEED]

can i use 2835 smd led?

[@96garage]

@@SAED_ASAEED yes u can. I used also 1206.

[@Glandorf570]

Kako napraviti da display i dalje ima kontrast ako se original crvene ledice zamjene sa bijelim??

[@96garage]

@@Glandorf570 nisam se nikad oko toga cimao pa ti i ne mogu bas pomoc drug. Jedino da probas i vidis.

[@ronishlourembam1364]

Is it working on VW polo

[@96garage]

Yes, it do.

[@Bennnce]

Hey could you help me? I did that on my octavia 1 i changed all the leds to white. I tried it back in the car and from the ones that i changed only half of the km/h numbers are working, the fuel or the temperature meter is not working. Did i accidently change up a - + and that could cause this kind of problem?

[@96garage]

@@Bennnce Hi, it can be that u change the + and - If u have taked a photo from original smd that chack it with the new leds and see where u did make mistake. I hope u will solve u problem.

[@Bennnce]

@ sadly i forgot to take picture of it. But the drawing that you made is the exact same + - as mine how i remember. But i was really tired after work when i did it so maybe i just mixed up the + - 😅. Thank you for answering tho! I’ll take it apart today when im home and check on them

[@96garage]

@Bennnce u will fix it, not big issue. Good luck bro

[@Bennnce]

@@96garagehey man! Thank you so much for the video and the help i fixed it! I figured it out that i was so tired when i did it that at some leds i used super glue to make it stay in a good position. That caused the problem because the glue got on the sides of the led where it supposted to get the eletric. Have a nice day!

[@96garage]

@@Bennnce I'm glad to hear that. Wish u all best Friend

[@dariopapiii]

It s working with 2835 smd s?

[@96garage]

It can work

[@MrkiJebac]

gde mogu da nađem taj ispitač za led diode

[@96garage]

Trazi na Aliexpressu ili ebayu "smd multimeter probe tweezers"

[@Acolytes_]

Ledice još svijetle po 1 godini? Naručio sam identične, ali ne znam da li bih to učinio ili ne zbog kvalitete ledic

[@96garage]

Drug koji radi duze od mene, koji je radio satove i prije 3godine+ jos uvijek sve svijetli i radi. Tako da se ne treba mnogo oko toga zamarati 🙂

[@Acolytes_]

Hvala care. Ili ledice svijetijo kad avto ne radi? Trebaš da daš upor? Če da, koliko ohmski?@@96garage

[@96garage]

@@Acolytes_ Au brat, nisam te bas sve razumio haha Nista otpornici, ne trebas to nista dirati. Odlemi staru led i zalemi novu led, to je sve.

[@MiroslaavC]

Da li si mogao i centralni bord odraditi ili mora ostati crven?

[@96garage]

Moze i on, al pitanje je kako bi svjetlio s drugom bojom. Mozda staviti nove crvene diode da svijetli bolje.

[@MiroslaavC]

@@96garage moguće, ove fabričke diode nisu nešto jake, ja sam hteo da mi ekrani budu beli i brojevi na skali, a da ostanu plavi krugovi sa crticama, ne znam dal je to izvodljivo

[@96garage]

@@MiroslaavC Pa sad, s obzirom da ja nisam nisam stavljao bijele diode u ovaj ekran i da ne znam kako izgleda, ako ti bilo sta kazem, mogao bih te slagati haha. Tako da doista ne znam, ostaje ti samo da probas i da vidis svojim ocima.

[@MiroslaavC]

@@96garage tako će i biti, probam pa ćemo videti, hvala brat, svako dobro 😃

[@96garage]

@@MiroslaavC Takoder. Sretno

[@cvele4433]

Koliko bi para uzeo za ovakav posao?

[@96garage]

Javi se na IG @van_pehli

[@mehmetyazar16]

Can yo say me which kelvin leds? 6500? 4500?

[@96garage]

9000-12000K check the video description for link

[@_________Rema____________]

Svaka cast na radu ... Koliko bi kostala ovakva modifikacija da uradis isti sat je u pitanju samo bez borda ..

[@96garage]

Hvala drug. Sumnjam da si blizu, ne znam koliko bi ti se isplatilo.

[@_________Rema____________]

@@96garage pitao sam okvirno koliko uzimas ..

[@96garage]

@@_________Rema____________ 30KM

[@FastSee]

3v led or 6v ?

[@96garage]

3v 🙂

[@dejandon]

Koji LED se koristi zZa GOLF 6 Izgubio sam pozadisnko svetlo

[@96garage]

Ako mislis bas na kilometar sat, tu idu isto ove 3528 smd diode, s tim da bi najbolje bilo koristiti org diode sa sata od sestice, radi jacine i nijanse.

[@7thsenserecordzz488]

poz drug, imam pitanje , citao sam po forumima nekim kada ljudi izvade taj sat i hoce ponovo da vrate zna se desit da se ukljuci immobilizer, jesi kad imao takav slucaj GOlf 4 u pitanju

[@96garage]

@@7thsenserecordzz488 Pozdrav, nisam imao taj problem. Samo nemoj kontakt davat, il idi bas na siguricu pa skini klemu.

[@robertbeyers1308]

Don't turn the needles counterclockwise during removal. It'll break your stepper motors.

[@bestblkn]

kada narucim sa alija npr 1 komad jel se podrazumijeva u tom jednom paketu kao 100 komada za 2.43KM ?

[@96garage]

Jeste drug

[@_basic9192]

Ima li neki link?

[@dieselMpower]

Pozz drug odakle si imas li neki kontakt?

[@96garage]

Pozdrav Fojnica Mozes pisat na IG @van_pehli

[@2012isRonPaul]

Bremse kaputt