Install Of Speed Sensor

[@ronniecatalano5246]

Fixed my car in my 1988 Delta 3.8! I was having so much problems with transmission and throwing a code 24. Can’t believe I almost installed a used transmission. Speed sensor replacement for the win!

[@ADHD20B]

This kind of saved me a headache as i thought i would have to change the whole mechanism and main gear to suit an electronic sensor. This gives me hope, can just screw one of these on and hopefully wires up to my existing electronic speed sensor on a Eunos Cosmo 😊

[@codyfeatherstone731]

I like your thumbnail it taught me a lot. Thank you!!

[@thepeoplesmorgantownindian8383]

Need to make one that fits triumph. I bought a set of gauges and am currently making my own adapter. It would be nice for Triumph builders to have the option of these gauges.

[@jamaralexander8528]

Look like the pin on the sender was different size than the orange or red gear in trans. Did it really work. I have that concern now about my install

[@mxlman26]

HELP, I want to wire a 4L60E (2000s cámaro) to a firebird digital dash.... Any clues or aftermarket pice that would fit?

[@marketingdirector3103]

The speed signal will come the ECM, just wire directly to it.

[@darealblair9459]

Very good explanation

[@jaredpado8356]

What is the part number I dont see a link for the sensor

[@jonathanleonard657]

Is there a way to hook up the vss sensor behind dash? The old one has an optical pick up behind speedo

[@etceteraleatherworks1103]

My Dakota Digital dash came with the speed sensor shown in this video, but my transmission uses what I assume is a magnetic speed sensor, which makes the one supplied non compatible. Is there an alternative solution to my non compatible parts?

[@deankay4434]

As an ASE Master Tech since 78, working on motorized anything since the 1970's, I can answer your and others questions. The output shaft has a $6 40 tooth tone ring / reluctor that is driving onto the output shaft, inside the tail housing of the transmission. With the speedo-drive hole open, in neutral you will see metal rectangular teeth that is driven into dead center of the pickup opening. It provides higher resolution for newer vehicles EGR, Shifting, VSS, and P1870 code for speed comparison from input to output. This changes line pressure for internal slippage of the transmission at road speed. The Camaro and Firebird in 1992-1996 used a pickup that bolts on. Two wire in factory schematics is "Hi" and "Low". Low is ground as this is an A/C signal, at the PCM for "LS family engines". This signal goes to dash speedo, ABS (3-Channel) and Radio. Radio became louder with road speed the faster you drive, if equipped and set. I prefer to wrap in foil tape to ground- tape sold at home improvement or run ground, with wires twisted 9 times per foot. To keep RFI (Radio Frequency Interference) from plug wires to high frequency fuel pump sales signal at gas stations. (They don't use wires / can cause entry-start problems on keyless vehicle-TBS) Connector can be bought online or salvage yards. Solder and shrink connectors, please. DK, ASE Master Tech Since 78, mechanic since 70. (Note; I will respond to questions) by responding to this comment. Have a lucky one!

[@frankkjllefjord446]

This is great. I have a1989 Camaro Iroc-z with 700R4 transmission, so i assume this unit will fit. What do i need to do with my speedometer instrument, can it be converted as well? I really want to hang on to it as the car are 100% original except for the wheels

[@camaropartsgarage]

I didn't get that same speed sensor that you used in yours. I think I was sent the wrong one. The one I was sent has a round tip.

[@chrisbelli445]

Is this something that should be replaced during a transmission rebuild?

[@Juicejunkie409]

I got the plug in the screw in piece but my transmission doesn’t have that extra attachment that you guys show on the transmission what’s going on

[@timestandingstill]

I bought the speedo adapter the color of the wires are different than red black and white, I'm working on a 1988 chevy silverado, what color do I hook up to the red .... black.... and the white. Is there a fast and easy way to know?

[@Intellitronix]

Hello Jim, you can contact Jim Fultz for technical questions in Technical Support at 440-210-7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail]. Your Intellitronix Team!

[@johnnyhagar7109]

@Jim Kingdon did you ever figure this out? I have the same question

[@mongrott]

Yeah. Or just pop the tailshaft off and throw in a reluctor wheel, then use the stock 88-98 sensor

[@morrisontomtom1464]

Would 4l60e reluctor wheel fit th350 shaft so I could use my factory speedo in my 93 silverado with th350?

[@autohog]

would this work for a 2002 Ford Econoline 350 Superduty trans?

[@nathangibbs2606]

Hi there thank you for sending me the speed sensor I also need the bit that its wines on to that go onto the gearbox so everything seems to be alright for wiring down not a problem with the but you sent us but I need the bit that it's screwed into that is in the actual gearbox cog gear whatever pieces in there this it's in the back there be great thank you

[@Intellitronix]

Hi Nathan, the best way to contact us is via email or telephone. Email [e-mail] or [e-mail]. Call 440-359-7200 ext 201. Thank you!

[@thabisomampheko4362]

Does this sensor also control the rpm counter?

[@papapetunia4905]

No I don’t think so, rpm gauge(tachometer) usually hooks up to your distributor

[@pleasantsight]

I need to get the adapter 700r4 yo th400 let me know if is any adapter, thank you buddy

[@Intellitronix]

Please call our sales department and they can assist you

[@lt.schlechtnacht9414]

So does the sensor produce a pulse per revolution like a normal one would?

[@Intellitronix]

Hello Lt. Schlechtnacht, you can contact Customer Support at 440-359-7200 ext 214 or email [e-mail] or the Help Desk at 440-359-7200 ext 201 or email [e-mail] and they will be able to answer your question. Thank you! Your Intellitronix Team!

[@glowdog6321]

How about showing what went before that?

[@djkoold8833]

my 92 c1500 is setup to electronic speedo but when I switched transmissions I wasn't thinking and installed a 700r4 with speedo cable.im not wanting to switch transmissions again just to get speedometer to work.how can I get this speed sensor of yours to hookup to my factory speedometer? or is it even possible?

[@bellalovesmusic88]

I'm on the same boat as you did you figure it out?

[@mandrakeholmes6352]

We have a electric speed sensor so we have to get the GPS which is another $125 plus the cost of shipping and handling

[@mandrakeholmes6352]

What he's working on as a cable transmission

[@mesnlokz3335]

What if I want to use my speedo cable on a 4l60e with a controller..

[@marketingdirector3103]

The speedometer can receive signal by using our electric sender, a trans with an electric VSS, a ECM or GPS sender

[@soychingon.6808]

what about if transmission is electronic sensor what I need to do

[@luisyzfr672]

Eduardo Dominguez did you figure it out?

[@theunderdawg]

Luis Bedolla guess not

[@raul5394]

Did you figure it out?

[@Beauj27]

I have the same question. I have just tapped into my current speedo line (yellow) and sent it to the cluster. It works only if im going faster than about 30mph. Anything slower than that shows im doing 200mph+!

[@Intellitronix]

For technical questions, please call Jim Fultz in Technical Support at 440-210-7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail]. Jim is very knowledgeable and will be glad to help you. Please let us know if you have additional questions. Your Intellitronix Team!

[@milcacantu1066]

How about brother, could you tell me what the name of the sensor is?

[@shannongarrison153]

Is this the same transmission in a 2005 chevy trailblazer

[@Intellitronix]

Hello Shannon, please contact Helpdesk at 440-359-7200 ext 201 and they will know.

[@MrDown79]

I installed on my 79 olds and for some reason the speedometer only works when the car is moving in reverse, will not work when car is moving forward.

[@Intellitronix]

Hello Jesse, you can contact Customer Support at 440-359-7200 ext 214 or email [e-mail] or the Help Desk at 440-359-7200 ext 201 or email [e-mail] and they will be able to answer your question. Thank you! Your Intellitronix Team!

[@KCKidGaming]

So if thats for the 700r4 why did they send me that sensor for my t5 transmission?

[@matthew24997]

KC Kid did it work?

[@Intellitronix]

Hello KC Kid, we apologize for the delay. You can call Sales at 440-359-7200 ext. 208 or email [e-mail], Orders at 440-359-7200 ext. 206 or email [e-mail] and they will take care of your product issue. All products have a LIFETIME FACTORY WARRANTY. Your Intellitronix Team!

[@tumashedrick]

How do i order for 1978 chevy caprice th350 with cruise control

[@Intellitronix]

Hello Tumas, you can order the 1978 Chevy Caprice LED Digital Replacement Gauge Panel on the Intellitronix website with cruise control for $399.95 plus 15% discount through Dec 15. Shop today and save www.intellitronix.com/product-page/impala

[@aloneinanearthship4010]

What exactly was wrong with the perfectly reliably way of doing it with a speedometer cable??

[@Intellitronix]

Technology changed with the new Analog and Digital Gauges.

[@mongrott]

Nothing, but when you throw an early 80's 700r4 in an 88-98 c1500, the speedometer won't work unless you butcher a hole in the dash to use an older mechanical speedometer

[@EoEx-GG]

just a quick question would this work if this was in the clock cluster it self then wired to a digital speedo so when wheel moves would the needle move in the cluster thanks .....

[@Intellitronix]

For technical questions such as yours, it would be better to reach out to Intellitronix Technical Support at 440-210-7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail]. The Technical Support department will have the answer to your question. We will forward your question to Tech Support. Your Intellitronix Team!

[@milcacantu1066]

what is the name of the sensor

[@caddi70]

I have cruise control. How does that work?

[@Intellitronix]

Hello SwitchDoctor, please call Technical Support at 440 210 7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail]. They can answer your question. Your Intellitronix Team!

[@smokechop3599]

I don’t have that same sensor on the the tranny where can I get one ?

[@Intellitronix]

If you rare still using a cable driven system, you will need this. It is found in the "Sending Units" section on our website. If you are not using a cable driven system, a speed sender is not needed.

[@ryanadamsamazing]

I have a Chevy 4x4 where does it go

[@Intellitronix]

Hello Ryan, please call Technical Support at 440 210 7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail] and they can answer your question. Your Intellitronix Team!

[@yeeyee7862]

It goes on the transfercase

[@lubblegarage]

Can I install on my stock camaro VSS trans sender?

[@Intellitronix]

Hi Scott, are you installing your stock Camaro VSS trans sender versus the speed sender that came with the Intellitronix gauge?

[@lubblegarage]

@@Intellitronix Thanks for the reply. This is a custom build. I have 90's Camaro T5 with an electric sender. I am using an older version of the AP20002 universal gauge that came with a manual to electric converter. I read where the wires can be hooked directly from the VSS line from the dash to the sender on the transmission on other gauge sites. Is this correct with this gauge cluster? Thanks

[@Intellitronix]

@@lubblegarage Hello Scott, you can call 440-359-7200 ext 214 or email [e-mail] and the Customer Support department will be able to help you. We've sent your question to them directly as well. Your Intellitronix Team!

[@lubblegarage]

@@Intellitronix I re-read the directions and it was a direct fit to my stock electric sending unit. I just need to calibrate and we are golden. Thanks

[@Intellitronix]

@@lubblegarage Perfect!

[@veneno276]

Is the reset need it every time we replace sensors?

[@Intellitronix]

Hello Eduardo, the answer is No. For more information, please call Technical Support at 440 210 7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail]. Your Intellitronix Team!

[@SGTK-lh2zp]

the sensor will not fit onto my 200R4 the threads are not deep enough on the sensor.

[@Intellitronix]

Hello Eric, please call Technical Support at 440 210 7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail] and they can help you. Your Intellitronix Team!

[@efrainzuniga7598]

What’s that red cable do?

[@Intellitronix]

This is an electronic speed sensor, red wire is ran to 12V source, black to ground (engine block is the best ground available), white wire is signal wire, runs to the speedometer wire coming off the dash

[@mrtrill6147]

What about 2004r?

[@Intellitronix]

Hello Richard, please call Technical Support at 440 210 7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail] and they will answer your question. Your Intellitronix Team!

[@wildriderz_bw]

What’s the part number

[@arthurjordan8371]

what is the 12 volt source \

[@Intellitronix]

Hello Arthur, The 12 volt source is the battery.

[@stevekazmer134]

@@Intellitronix which white wire are you talking about? thanks

[@Leveluplivin]

What about the T56

[@Intellitronix]

Hello LevelUpLiving, we sent your question to the Intellitronix Team! We should here back later this week or early next week. The Team is exhibiting at PRI Performance Racing Industry 2019, so they will not be back in the office until Monday, Dec 16 2019.

[@Intellitronix]

You can call Technical Support at 440 210 7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail] and they can answer your question as well. Your Intellitronix Team!

[@Leveluplivin]

@@Intellitronix yes please I have gm trans and I have a 6 speed manual transmission which is call a t-56 from a 2002 trans am

[@Intellitronix]

Hello LevelUpLiving, could you please give us your telephone number, so the Technical Support person can call you personally? Your Intellitronix Team!

[@GusgusA1]

Available for a turbo 350?

[@Intellitronix]

Hello GusgusA1, fits everything from GM 1948-95. If you have further questions, please call Technical Support at 440 210 7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail]. Your Intellitronix Team!

[@soychingon.6808]

I think thank you

[@soychingon3324]

?.....????????

[@Intellitronix]

Hello Soy, did you get a satisfactory response to your question? If not, please call Technical Support at 440 210 7646 ext. 203 or 440-359-7200 ext. 203 or email [e-mail] and they can help you. Your Intellitronix Team!

[@robertorodriguez8238]

Angel.montero