Install The BMW F10 F30 After-Market 360° Surround View Panoramic Camera System of PEMP

Installing a BMW 360 Panoramic Camera is not an easy task, it takes a long time. The workload is also huge. But the installation is really satisfying , which is probably the reason why many people are willing to invest in it.
This video went through three revisions before I posted it. I think it's a little rough myself, but I still hope it helps you get to the install. If you feel confident , we'll go together !
00:35 Remove the front left door rear cover;
02:53 Removal of front left rearview mirror
04:00 Removal the front right door rear cover;
05:43 Removing front right rearview mirror;
06:57 Cutting holes under the rearview mirror;
09:35 Confirming the position of the cut-outs in the mirrors;
21:05 Removing front left trim bezel and laying out the wires;
29:40 Removing front right trim bezel and laying out the wires;
34:23 Laying out the wires of front camera;
36:43 Laying out the wires of rear camera;
45:49 Restoring front left door;
47:46 Restoring front right door;
51:36 Changing rear view camera to 360-specific camera;
55:52 Connecting 4 camera connectors;
58:17 Calibrating and debugging 360 camera.
01:04:03 How to use 360 panoramic video feature
I think there are 2 things to note:
1. the location of the left and right rearview mirror openings, you need to measure the location according to your car. Without hurting the lenses or having it on a step.
2. the original rear view camera, you must replace it with a 360 camera. Also have to keep the original pullout. This job is a waste of time I think. I am looking for a matching panoramic rear view camera with a puller.
How to Buy?
F30 With 360 panoramic Camera
www.pempcar.co...
F10 With 360 panoramic Camera
www.pempcar.co...
Let me know if you have a good suggestion. Let's optimize and perfect this installation together.
[e-mail]

[@ilyaskajee3830]

Great work. Only issue i didnt like was what was done with the reverse camera.

[@pempcar]

Yes, it should be replaced with an integrated rearview camera with a puller.

[@mchanghk]

hi, could you share where exactly the hole for the wire to go thru from inside driver compartment to outside engine bay? Which hole to use?

[@pempcar]

This video can help you. kzbin.info/www/bejne/hXy4cmeJfZejbKs

[@arijit020]

I went to my local bmw service place and the price they quoted was unbelievable $10k to install all the cameras and code it

[@pempcar]

0k? right I still recommend you finish it yourself based on the video. Because it takes longer. The installation store will charge a high fee.

[@IlkeAlpOzer]

I just installed a rearview camera on the back trunk handle. I see that 360 view camera connectors are different, do i have to uninstall that backview camera to install this 360 view ? coz othervise there will be 2 cameras at the back.

[@pempcar]

@@IlkeAlpOzer 360's panoramic rear view camera is a dedicated camera，Yes, your best bet now is to keep the 360's camera and your original rear-view camera, so that your trunk handle can remain

[@pempcar]

@@IlkeAlpOzer A better way is to use the 360's rear-view camera with the special trunk handle bracket, so that you can only use the 360's rear-view camera.

[@IlkeAlpOzer]

@@pempcar Could you also share wiring diagram ? or basically expalin where those red wires go ?

[@IlkeAlpOzer]

There is a wiring diagram but it doesnt tell anything about where the red wires connect to, how do these cameras get electricity

[@pempcar]

@IlkeAlpOzer The after camera power from the backup power of the Android screen. so the red wire no need connect any where.

[@m0untainli0n1]

You need to make a version for the BMW F32 NBT EVO

[@pempcar]

Yes, that F32 NBT EVO you have we'll also be producing the corresponding 360 panoramic camera.

[@m0untainli0n1]

@@pempcarThe F32 2018 and up models have a thicker front grill than the older models, so the front camera clip won’t fit on the grill at the front, so you’ll have to modify the clip for people who have a 2018 and up F32 model. And I think for easier installation, they have a side mirror cover for the cameras that clips into the side mirrors. And send me a link for the new Ultra-Thin 12.3" Android Screen on your BMW F32 NBT EVO.

[@pempcar]

@@m0untainli0n1 Your opinion is important and I need more time to finish it。

[@m0untainli0n1]

Any updates?

[@pempcar]

@@m0untainli0n1 Sorry, no

[@mistaondemand]

How about you guys fix the android 13 update

[@pempcar]

Please let me know if you are experiencing any problems with Android 13?

[@markbragg5734]

Can i get the link when its ready for sale?

[@pempcar]

Please let me know the model of your car with the date of manufacture and I'll provide the link to you.

[@markbragg5734]

2013 328i f30

[@pempcar]

@@markbragg5734 yes, this one fit your bmw 2013 328i f30. www.pempcar.com/products/bmw-f30-evo-android-screen-12-3

[@m0untainli0n1]

Where is the link to purchase these items?

[@pempcar]

I'm in the process of putting together a link to the product and will send it to you when it's ready for sale.

[@m0untainli0n1]

Thanks

[@m0untainli0n1]

@@pempcar Is the link ready?

[@pempcar]

@@m0untainli0n1 Sorry, no

[@claudiughinea3100]

Is it available for e60?

[@pempcar]

@@claudiughinea3100 Sorry. This one cannot fit you e60. Below link to fit your car. www.pempcar.com/products/bmw-e60-ccc-12-3

[@xhovanikapone7169]

Where can i order ?

[@pempcar]

Dear, you can buy it from below link www.pempcar.com/products/bmw-f20-f30-ultra-thin-12-3

[@youngmohd84]

How many inch is that screen?

[@pempcar]

This one is a 12.3" Screen.