I installed mine on my 2007 odyssey almost 5 years ago. Absolutely no issues and it was one of my best purchases ever. It enhanced my driving experience immediately
@gotitdone4 ай бұрын
@@waholoopesorry74 Thank you for your comment. I completely agree. No more shaking.
@chfengr2 күн бұрын
Super video. Your time spent will save many their time. Thank you.
@gotitdone2 күн бұрын
@@chfengr thank you for your voice comments. Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this.
@TheSQLPro8 ай бұрын
Nice video. Mine is on order now. Just wanted to tell other owners that have Honda's with similar engines to check the Air Intake Hose as it has cracks due to VCM high temperatures. I changed mine yesterday, the RPMs are solid now, no more flickering and dancing on the dashboard. An easy $20 fix (short term) along with the VCM disabling (long term). 2011 Honda Odyssey with around $130K miles.
@gotitdone8 ай бұрын
Thank you for your comment. My air intake cracked a long time ago and had to change it. Easy fix. I am 246K miles now. The ride feels better after disabling the VCM.
@gotitdone8 ай бұрын
Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this. I am regularly fixing things around the house and adding videos about it.
@OldManFrank7 ай бұрын
*VCMTUNER II MANUAL - Avoid Check Engine light (P0118) code on installation - It is recommended you turn off the vehicle, pop the hood latch and leave the hood open some 15-30 minutes without the key in the ignition before installing the product. If you have a push button start, keep the keys some 30+ feet away from the vehicle, otherwise the ECU may be in an accessory on-state and throw a p0118 code. After some 15-30 minutes, the vehicle ECU will normally stop monitoring the ECT circuit and no code should be generated while you install the VCMTUNER II. It is possible to receive a check engine light on some models if any portion of the harness is removed while the ECU is still activated; the computer will see the circuit disconnected and throw a CEL code in some circumstances. If this does happen, the code will clear itself at a later time. If you have a code reader or scanner, you can clear the code at your convenience.*
@isaacsanchez515910 күн бұрын
I installed this 3 days ago ,driven the car for about 500 miles with it on my Crosstour it perfromed excellent, but now my battery is dead could it be this draining it, battery is 6 months old
@gotitdone10 күн бұрын
@@isaacsanchez5159 I haven’t experienced that issue. My car’s battery is almost 4 years old. I would recheck the connections and make sure it doesn’t have a bad contact onto metal that is draining it. Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this.
@AnalynnPalacios-m1sАй бұрын
Hello - would you mind sharing where you got your part from?
@gotitdoneАй бұрын
@@AnalynnPalacios-m1s This is the product I bought: www.vcmtuner.com/products/vcmtuner-ii-honda-3-5l-i-vtec-disable-vcm-eco-mode Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this. I am regularly fixing things around the house and adding videos about it.
@tdodge293 ай бұрын
Have a 2013 Honda Accord EXL V6 and can't get the original cord disconnected. Cut my hands up trying to get it out for over a half hour. Already took the engine cover off. Any tips?
@gotitdone3 ай бұрын
@@tdodge29 are you talking about the connector on minute 1:30 on the video? Is that the one you cannot disconnect?
@ninjamonkey15917 ай бұрын
Is there an alternative solution if your vehicle doesn't have the battery bracket?
@gotitdone7 ай бұрын
You mean the place where you hang the device? If that is the case, I would just look for a place where to lock it place or even maybe Velcro… I don’t know. You just need to keep it away from the engine’s heat
@dekideki95195 ай бұрын
I have honda accord v6 2008 3.5 with VCM, i install VCM muzzle 2 3 years ago my car is working how how to be 😊
@gotitdone5 ай бұрын
@@dekideki9519 same here. The car feels better
@juniorsaldana94443 ай бұрын
Whats the best muzzler or tunner.....2014 odyssey 77k......
@gotitdone3 ай бұрын
@@juniorsaldana9444 You may not know but the trick with these devices is that they set the coolant temperature at 74C so the computer never triggers turning off cylinders. I recommend the VCM Tuner II since on top of setting the temperature to 74C, it also continues to monitor the coolant temperature just in case something happens. Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this. I am regularly fixing things around the house and adding videos about it.
@johnnguyen85353 ай бұрын
Whats the green wire for? Leave it disconnected?
@gotitdone3 ай бұрын
@@johnnguyen8535 leave the green wire disconnected. I think it was for diagnostics. Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this. I am regularly fixing things around the house and adding videos about it.
@streetpharmacist2 ай бұрын
If you want to reenable the vcm without removing the device, you can connect the green cable to ground
@gotitdone2 ай бұрын
@@streetpharmacist thank you for the tip
@danno58058 ай бұрын
Forget the installing it where can i buy one? No one has them because they're all sold out.
@gotitdone8 ай бұрын
Thank you for your comment. The site to buy it is in the description of the video: www.vcmtuner.com/products/vcmtuner-ii-honda-3-5l-i-vtec-disable-vcm-eco-mode Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this. I am regularly fixing things around the house and adding videos about it.
@gotitdone8 ай бұрын
I recommend creating an account with this site and having a PayPal account pre configured, so when they release the limited stock on Mondays you quickly buy one. Another idea is to check Facebook marketplace for one
@jc92337 ай бұрын
All you need is the plugs and a cheap resistor. I'm not sure why they started adding power to them as they are already powered from the ecu. Either way, all you gotta do is unplug them, make a jumper with a resistor inline and plug it inbetween the connection to the vcm sensor... look at the cheap vcm delete kits on Google. They will show you what resistors to use.
@OldManFrank7 ай бұрын
@@jc9233 *I believe this device is more plug and play than the devices you are speaking of. VCMTUMER II = plug in without having to worry about finding the right resistor and it will auto adjust if needed base on temperature, etc.).* The cheap plug/resister setups I have seen online = you will have to find the right resistor (trial and error) to works without issue and in some cases you may have to switch the resister based on the seasons. Also, the cheaper products may not with stand the engine temperatures and the cheap plastic and connects can burn, etc.*
@eastmanresearch31432 ай бұрын
They are available every monday at 9am pacific time to purchase. Batches sell out quick.
@tonyxiong69628 ай бұрын
So once you install it? A check engine code comes on? And you just clear it?
@gotitdone8 ай бұрын
Yes. I got the P0118 and cleared it out. It never came back. Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this.
@OldManFrank7 ай бұрын
@@gotitdone *When you installed this device, did you happen to have the key fob within 25 feet of the vehicle?*
@gotitdone7 ай бұрын
@OldManFrank this is a 2013 Odyssey with no push start button. But I guess I didn’t wait enough time and got that error code. I didn’t have any problem erasing it. It hasn’t come ever since.
@OldManFrank7 ай бұрын
@@gotitdone *Ah. Yeah. The manual says you can clear the code or it will most likely clear on it's own. My Mom's 2015 - 2017 Odyssey has the push button start. I am hoping to get this installed on her Odyssey this Summer.*
@gotitdone7 ай бұрын
@@OldManFrank Awesome! And thank you for your comments and research. Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this. I am regularly fixing things around the house and adding videos about it.
@Ape-GG9 ай бұрын
Plz post link !
@gotitdone9 ай бұрын
I bought this one: www.vcmtuner.com/products/vcmtuner-ii-honda-3-5l-i-vtec-disable-vcm-eco-mode I added it to the description. Thanks. I am so glad it helped you. Please consider subscribing to my channel or a $thanks. It will help me on doing more videos like this. I am regularly fixing things around the house and adding videos about it.
@FranklinLesley-c1j3 ай бұрын
West Spring
@JuliusJoan-y1n2 ай бұрын
355 Schmeler Island
@RobertWilson-i5x2 ай бұрын
Sunny Locks
@ThomasDale-w8u2 ай бұрын
Ullrich Roads
@TurnerEarl-e3i3 ай бұрын
Will Crossroad
@AngelaYoung-v1k2 ай бұрын
Hahn Walks
@KristineJohnson-j5s2 ай бұрын
Bosco Pine
@RobertSeay-o8p2 ай бұрын
Leuschke Rest
@MaryStafford-z9f3 ай бұрын
Pablo Islands
@GunterWill-i7f3 ай бұрын
Considine Groves
@dekideki95195 ай бұрын
This is too much money, i paid 3 years ago less than $100 VCM muzzle 2
@gotitdone5 ай бұрын
@@dekideki9519 I got mine from Facebook marketplace. A guy was selling it for $50. I got lucky