Is she going to be lifted back on?

Your thousand pictures speak trillions of words. Thanks! My 2015 Accord J35 has a similar looking MAF, and I was shocked by its appearance. Seeing you clean yours gave me confidence that it's OK to spray it. I'm also going to see if my DX8 scan tool can manually open the throttle. Dang that Civic is cramped living quarters. Update: The scan tool doesn't manually operate the throttle position. it just checks or calibrates. It's much simpler to just put a brick on the gas pedal. After cleaning throttle and MAF and recalibrating, I can't even feel the engine idle. My car has 130K on it. Thanks again!

You are genius ! Great idea !!

Can you drive like that without throwing the air bags off?

What size drill bill did you use to get the screw out for the rotor? I’m stuck there.

Very helpful videos, straight forward

How do you adjust it from the calipers

You are genius thanks for share!!

Did it take 4 quarts exactly?

Dude thanks! I literally followed your instructions step by step and got my toothbrushed fixed.

YMMV on this one. The head of mine was loose like in this video, but the screw was not the issue as I could not tighten it any more. The gap also was not the issue. Beside the point since the toothbrush needs replaced anyway, but I also destroyed the body trying to pry the cap off.

Thanks for the video. It saved me some money.

My hero.

Que buen video amigo, re zarpado!

Are you sure your refrigerant is not 1234yf, not R134a? I know honda switched a while back.

Bless up yute ...honda owner from 🇯🇲

I had a bad day when i changed my. Pcv valve it. Doesn't come out it keeps twisting the bolt. Anyone have the same trouble and how do you fix?

Oh my God! It looks easy but is not! I wish I could do that to my own car and don’t have tu pay, but no I prefer somebody else does it for me!

Is it necessary to put silicon paste at the back of the Air box?

I didn’t show the name of the spark plugs or the specifications, and I didn’t show the tips either. Badly. Before you do anything, you must first clean it of dirt and then unwind it. The hatch does not close completely and returns. Don't know what to do? Otherwise thanks.

Hey bro, I needed this video. Thank you.

Where u get the discount !?

I just did mine. THANKS!

THANK YOU!

Whats it sound like?

Knocking on wood.. but I haven’t had a close call with a deer since I installed them on all my cars.

Product link: a.co/d/0ih0OmWu

So 56f taking out my passenger front seat and entire back seat area of my 2015 honda civic lx sedan. I just got the socket wrench set as I have no car tools. If you have time why did and how did you disconnect the battery before using the socket wrenches? I have no experience fiddling around with cars except to check fluids, change a tire and put air in the tires...lol I also saw you doing something with i guess fuses??? I know I wouldn't rip them out but is there anything I should be looking for specifically if I have this video with me in the car while I am doing this. Or should it not be pLayed with by someone who has never done anything like this before????? I just want to be safe, is all. Thanks for the video.

Whole video with one hand wow you are my hero 😂. Thank you for no nonsense video.

Thanks for the reminder, brought me back , my parents had a oldschool seatbelt cutter in their '95 ford escort.

Link to product: a.co/d/0e4Gdzu4

This looks so easy. I love my civic, you can really tell they designed it with easy maintenance in mind. The oil and trans fluid are equally simple to DIY if you have a way to lift the car. Even the alternator is just right there under the hood, lookin' all easily accesible n shit.

Thank you! From this video and one of the comments about how to fix the gap, I repaired mine and it’s as good as new. 👏🏽

I like your wallpaper

Great idea. I did use the RFID small circle in an adhesive square on the free bypass plug you can call and get from GE. I heated the sticker up up with hair dryer and removed a little at a time, more heat, remove a little more, etc.. Just like you said. I placed it where you did higher up on the refrigerator filter area . Bypass plug has a much smaller RFID on bypass plug than on the GE filter (just a small circle in an adhesive square, I then pressed it against my carpet and such to make it less sticky on purpose). So refrigerator now says BP on the display with the XWF filter and all works well. Now if you put the GE filter back in while you still have the bypass RFID sticker on, I guess that has a stronger signal, and then you have the refrigerator reading like you used to with the number of days. I just did this as a test. Cool, thank you

Can you buy this at AutoZone or do you have to go to the dealership?

Frig, I left the trunk open when pulling into garage after unloading 😞 Only so much the mind can remember. It was sunny and hot 🥵 I didn’t realize I left it open.

Thats the great video. Just a quick question. I have the same van. Did you leave the screw loose when each time your wife was pushing the breaks 5 to 10 times and once you tight the screw back, did your wife press and hold the break or should you let it go and then tight it.

Thank you, fixed the wife's toothbrush.

Fixed my ebrake handle that had too much play before even being engaged, thanks!

Thank you for sharing! This happened to my boyfriend and I when we were putting the belt back on after changing the water pump. The hex bold on the tensioner snapped. Super cheap hollow metal. Thank you for the fix we will try it tomorrow

Thank you! I was having this same problem with my 5100, easy fix.

Thanks for the information, appreciate it, keep going 😊

Ya got your M8s and M10s… but have you ever heard of the M100s?

That was useless

Nice video short and sweet!

Looks a bit tight for a torque wrench. What did you use?

This is applicable to my 2021 Civic Type R as well, couldn’t find a good video to show how to do the rotors (only the pads). Once you take the caliper off, it’s basically the same process. Thank you!

Nice piece of history!!!

Disconnect the battery why?