Installation - Aidoo Pro Fujitsu 3 Wires Wi-Fi Controller

Device to manage and integrate Fujitsu 3 Wires units remotely from the Cloud. Online control with the “Airzone Aidoo” App (available for iOS and Android). Wireless Wi-Fi connection. Externally powered by the indoor unit.
Features:
• Control of the parameters of the unit.
• Communication errors detection.
• Temperature and operating mode time schedules.
• Multi-user and multi-session.
• Port for integration via Modbus/BACnet protocol.
• Third party smart thermostat integrations (3PTI).
• On/Off output and input.
Access to the Initial Settings of the Fujitsu 3 Wires thermostat and set “Follower” (refer to the Operating Instructions of the Fujitsu 3 Wires thermostat).
Disconnect the indoor unit.
1. Perform the assembly following the next step:
a. Screw attachment.
b. Double-sided adhesive attachment.
2. Connect the Aidoo to smart thermostat (optional). It is needed a non-supplied external power supply connected to the same terminal.
3. Set the SW1 of the indoor unit for a 3 wires connection.
4. Connect the Aidoo to the terminal of the indoor unit using the supplied cable, Red-Y1, Gray-Y2 and Black-Y3. Respect the polarity.
5. Connect the Aidoo to power supply.
6. Power the indoor unit. Check the LEDs (see Self-diagnosis section).
7. Download the app and follow the steps bellow for its setting. Access the support section to see the user manual.
For further information about our products, go to airzonecontrol.com