Installation of Reversing Camera

🔔Don't forget to turn notifications on to get notified whenever new videos are uploaded 🔔
Interested in purchasing a Kayhan Audio head unit or accessory for your vehicle? Visit our website at kayhanaudio.com.au
Give us a FOLLOW on Social Media @kayhanaudio 🙌
👉 Facebook - / kayhanaudio
👉 Instagram - / kayhanaudio
👉 Twitter - / kayhanaudio

[@richardknight7034]

By far the shortest and clearest installation process video. No jib jab or bad camera angles, just a nice clear diagram, thanks!

[@angelinamelendez8565]

Yoooo I was looking for something like this and doing it while listening and seeing. Now I can understand it

[@giirmou3798]

I kinda love what you guys are actually doing for people, I'm really much happier to be a part of this great Company.

[@carlosgraphic]

Excellent video. The only one that I found that says that we don't need to connect to the tail light cable if there is a canbus present. Finally, It made my reverse camera works perfectly. Thank you.

[@1totalhitman]

Thanks bro! It worked! I love the short and straight to the point video.

[@hundeyinoluwatosin3511]

Best and Short video i have ever seen on youtube on how to install reverse camera. Well Done and Well Done. I so much understood the process.

[@KAYHANAUDIO]

Thank you for your patience. Please call our 24/7 technical support 1300 696 488 or message us on Facebook facebook.com/KayhanAudio

[@lbarakat9418]

This is the best explanation I have seen on KZbin.

[@stickboyfpv4742]

No bro. Dont splice into the 12 v at the tail light......😅 just splice the red wire to the red camera wire "back of car". Then get your 12v from the head unit with the red wire at the other "stereo", end... then you dont even need to use the ground wire.... its grounded in through the co aux cable👌

[@zigajamnik]

@@stickboyfpv4742 So you dont need to connect it to reverse light at all?

[@KTM_sniperITA]

@@zigajamnik you need tail light because when you use the retro gear the camera turns on

[@robsonmartins5587]

@@zigajamnik if you have canbus decoder no need to connect it to reverse light.

[@ardifly6779]

How do i know if i have a canbus decoder ​@@robsonmartins5587

[@lamarmc]

4 hours of swapping connections …then I find this 1 minute video🤦🏾‍♂️. Thanks for posting.

[@dancostaleitao]

Fantastic my friend

[@mamin380]

If I have the canbus should I still connect the ground wire near the camera? Thanks!

[@izansilvatorres]

Sencillo pero muy bien explicado

[@bejakabyle]

Thank you 🙏 very informative

[@faizanchaudhary7921]

Very Helpful Thank You

[@consultastecnicas6056]

muchas gracias!!!

[@TjFoXFTW]

thank you!!!!!!!

[@OCmeiwaku]

my existing wiring does not have an rca jack. any tips on splitting the wires so i can just replace the camera ?

[@rachidslaoui8341]

ممنون. خيلى جالب است.

[@cheekeongkong1192]

You a lot good,Easy looking for install powerful help,look someone very hard 😂

[@sincerelyyourz7984]

Do i have to ise a trigger wire or can i find another power source

[@Subhash-it1md]

I hv a dbt...if am using a dvr camera in the rear...from where i can take the postive connection..bcz the camera should be on all the time with the car

[@makpsv]

Nice video, but what about cars with Canbus? Where are we supposed to conect the camera if not like shownbon the video? 🤷‍♂️

[@Ahangermudassir]

Thankyou

[@nipunmadushanka8282]

Thnks brthr

[@richardlabarre7892]

Incorrect. The read wire needs to be connected to the reverse bulb. Not the rear tail lights.

[@cwnews8785]

Not true they want cam on all time not just in reverse

[@AcheDoss]

You're incorrect clean your ears he mentioned reverse tailight tonto

[@congbang87]

Can help me know, the forum or how to buy correctly output video cable for each car? Ex, toyota head unit have 4,8,16,20,24 pin to get output video. 16 pin is ok, but i dont know choose which one for each model of toyota.

[@KAYHANAUDIO]

Please contact our support team at [e-mail]

[@tallevi2829]

hey, what is a canbus, and how do I know if my car has it? I own suzuki swift 2013 thanks for the video btw

[@KAYHANAUDIO]

Hi there for any support please mail us at [e-mail] Just an update we have just launched version 5 which comes with : 1. 8 GB Ram 2. 128 GB SSD hard drive 3- 8 core CPU 2xA75 + 6x A55 4. Bluetooth version 5 with data sharing. 5. Built in wireless carplay. 6. Built in wireless android auto. 7. Built in DAB - Australia Only (( digital radio )) 8. 6 channel RCA out (( 4 speaker 2 subs )) with a massive 4.3 volt power on RCAs. 9. Ultra HD IPS anti glare screen. 10. Built in professional DSP (( digital sound processing )) 11. 3 port USB 12. Hdmi in and out 13. DB33R background noise cancelling microphone. 14. Microphone gain control volume. 15. AM/FM with RDS 16. 2 channel video out. 17. 2 channel video in. 18. Reversing camera FHD input ready. 19. Front and rear AUX input. 20. Front USB input. 21. Voice assist built in. 22. Instant startup. 23. Adjustable reversing camera guidelines. 24. Customisable Home Screen. 25. Startup wizard. For more info please check our website www.kayhanaudio.com.au or mail us at [e-mail]

[@brianree00]

from the tail light? or from the reverse light? please enlighten me

[@DEADPOLES]

Reverse light brother

[@GenXUndercover]

Hi im currwntly wiring it like this, but i also want a switch to power my camera whenever i want. Any smart methods to get power from a second place without interfer with my tail lights?

[@sammykamau2480]

Advice where is nsdd 62 reverse port

[@garblesp7705]

Top cool 0:50

[@bobdragneel8658]

Where to connect the black one

[@Fishing_with_Gilbert509]

Black goes to the ground must touch metal for the car

[@leasegrandcayman8747]

I connected everything as per the video, except that I did not connect the red "power" wire to the tail lights, but to the "back up" lights instead. I did that, because the "back up" lights only get power when the car is put into "reverse." Since I only want my rear view camera to work when my car is in "reverse," I thought that this is the logical way to do it. Well, why am I getting a "No Video Signal" message on a black screen then? Any advice?

[@bejakabyle]

You will need to connect the power the red wire to the tail light .

[@IlianNachev]

@@bejakabyle, What do the tail lights have to do with the back up camera?

[@bejakabyle]

@@IlianNachev Connect to the positive pole of the power supplvof the car's reversing light

[@westhomp1721]

Need to connect the back up camera power supply to the acc power that way it can be use not just during reverse operation when power is supplied that at time

[@IlianNachev]

@@westhomp1721, I don’t want to use it all the time though.

[@krystianp37]

Do you have a camera for the Insignia B 2018?

[@KAYHANAUDIO]

Hi with our headunit yes. Do installation at Unit 3,151 dhortys rd laverton north Victoria

[@krystianp37]

Thank you very much I thought you from the UK 😊

[@loopsmybrother6156]

Whats a canbus

[@KAYHANAUDIO]

Hi everyone we have just launched version 5 which comes with : 1. 8 GB Ram 2. 128 GB SSD hard drive 3- 8 core CPU 2xA75 + 6x A55 4. Bluetooth version 5 with data sharing. 5. Built in wireless carplay. 6. Built in wireless android auto. 7. Built in DAB - Australia Only (( digital radio )) 8. 6 channel RCA out (( 4 speaker 2 subs )) with a massive 4.3 volt power on RCAs. 9. Ultra HD IPS anti glare screen. 10. Built in professional DSP (( digital sound processing )) 11. 3 port USB 12. Hdmi in and out 13. DB33R background noise cancelling microphone. 14. Microphone gain control volume. 15. AM/FM with RDS 16. 2 channel video out. 17. 2 channel video in. 18. Reversing camera FHD input ready. 19. Front and rear AUX input. 20. Front USB input. 21. Voice assist built in. 22. Instant startup. 23. Adjustable reversing camera guidelines. 24. Customisable Home Screen. 25. Startup wizard. For more info please check our website www.kayhanaudio.com.au or mail us at [e-mail]

[@Vlad14969]

Why i didn't connect to tail light if I have canbus?

[@ivandobnik9277]

Bcz canbus automaticly sends power signal to camera when you put in reverse

[@Vlad14969]

@@ivandobnik9277 тогда как мне надо сделать? если не сложно нарисуйте схему и вышлите мне на почту [e-mail]

[@ivandobnik9277]

@@Vlad14969 if you have canbus you do exactly the same thing as in video just without connecting to taillight...because can bus will automaticly recognize that you put in reverse and then trigger the camera to turn on...

[@tallevi2829]

@@ivandobnik9277 hey, how do I know if my car has canbus? its suzuki swift 2013

[@ivandobnik9277]

@@tallevi2829 sorry i don't know...do you consider replacing your headunit or connect it to stock one? Because headunit must have video inputs for camera

[@MussaKZN]

I can weld anything! but being Colour blind sucks when wiring shit up!! I’ve got no idea!!!

[@ryanssongrs]

Ezzy pezzy

[@erniecurl3344]

Hello my camera has the led lights working but stereo isn't switching to camera view.i didn't install it so no idea what to check

[@Fishing_with_Gilbert509]

Did you put the yellow male to the back of your stereo on right female camera if it don’t say camera might say camin try that in put your car into reverse and see if it shows on the screen

[@leasegrandcayman8747]

@@Fishing_with_Gilbert509, I have the same problem and I have connected the video line to the "camera" input at the back of the stereo. I have also connected the power wires to the back up light, but still no video image... Any advice?

[@user-ui1fy4qz5q]

Olá bom dia

[@sold1million]

That black wire

[@KAYHANAUDIO]

Sorry please explain your question. If you need any support please mail us at [e-mail]

[@jfroux1]

Please help me. I want to connect an aftermarket camera to my gm volt 2017. On the car I have 5 wires, the ground (back) and the positive (+12v in pink) and I also have red, yellow and white. I cut the aftermarket RCA video cable and inside I have red, yellow and back wire. Someone can tell me how to connect this?

[@KAYHANAUDIO]

Hi there please mail us at [e-mail]

[@jmclick.6349]

How do you know if it's a man or female?