Installing 25mm Wheel Spacers On 370z

Improve the stance and handling of your Nissan 370z with this easy-to-follow tutorial on how to install 25mm H&R spacers. I will guide you through the process step-by-step, showing you everything you need to know to do the job yourself. From removing the factory parts to installing the new spacers, this video will cover it all. The H&R spacers will give your 370z a more aggressive stance and improved handling by increasing the track width and adding more stability to your ride. This is a cost-effective way to improve the overall look of your car without having to replace the entire suspension system. Don't miss out on this upgrade - watch now and give your 370z the aggressive stance it deserves!

[@timm58]

Looks awesome!

[@HustleGarageTV]

Thank you!!

[@pantera6343]

Wheel spacers are fine as long as they are hubcentric , have extended lug nuts , and are checked after first 100 miles or so , Your car looks 🔥

[@HustleGarageTV]

Thank you !

[@guillescatering]

Something that is highly recomended is to torque all the lug nuts I did my Accord I drove it for a week and re torque it again.good luck with your project

[@HustleGarageTV]

Yes for sure, retorqued the nuts down after a drive and over the week. Thank you for watching!

[@macrobialgains]

@@HustleGarageTV did it seem to have loosened ?

[@HustleGarageTV]

@@macrobialgains nope, 3 years on and still have these on after multiple track days, I just retorque them every time I take the wheels off

[@trishcrick1445]

OCD is a wonderful thing

[@HustleGarageTV]

:///

[@sundaydickson]

I love the look, in my opinion it (the rear) flushes just fine, I would leave it just like that. Great work!!

[@HustleGarageTV]

Thank you so much !

[@sundaydickson]

You're welcome sir, keep it up

[@Dontflake0nsbs]

What’s the offset on those rims?

[@HustleGarageTV]

Nikesb Flake 19x9 +47 Front, 19x10 +30 Rear, stock 370z sport rays wheel

[@trishcrick1445]

any concerns with wheel rubbing the fenders

[@HustleGarageTV]

Trish Crick no rubbing issues at all even with lowering

[@brilliantz3474]

Did these come with extended lug nuts? Or did you buy them separately?

[@HustleGarageTV]

I didn’t use any extended lugs nuts hey

[@brilliantz3474]

@@HustleGarageTV Okay great thanks! Z looks great btw

[@HustleGarageTV]

@@brilliantz3474 haha thank you so much!

[@romelmangune5745]

what are the front tire size and rear

[@HustleGarageTV]

Stock tyre sizes Front: 245/40r19 Rear: 275/35r19

[@yanpom]

Link to buy those?

[@HustleGarageTV]

i bought these second hand, check their website or a supplier

[@boostconcept_]

U still running them spacers?

[@HustleGarageTV]

Yeah, still running these spacers and my front spacers as well. 2 years later and no problem yet. Tracked it and everything

[@Luis-jd9ne]

aye man did the spacers come in 2 or did they come in 1?

[@HustleGarageTV]

Hey man, they came in pairs

[@andrewbarron6236]

I bought 25mm spacers for my 370z but the spacers don’t fit I think the bore is different think I can grind it make it wider?

[@HustleGarageTV]

The Nissan bore is a 66.1 bore I’m pretty sure. No do not grind it wider! Buy the correct ones

[@chrisprice2616]

That’s a brilliant idea! Let us know how that ended 🙄

[@joshuaminke6629]

this would be illegal in the UK, as the wheels extent further than the arches. 20mm would be better

[@HustleGarageTV]

Once they settle in, the wheels are actually inside the arches. Hop on our Instagram to see, it’s like flush and looks good hahaha

[@Prodrift7]

How far out did the spacer stick out over the oem studs? I’m interested in doing the same ones but 20mm all around but I’ve heard someone who had to cut the oem studs down a bit so they’d sit flush with the spacer

[@HustleGarageTV]

ProDrift 86 the oem studs fit flush with the spacers. No extra work or fabrication needed 😊

[@Prodrift7]

Project VQ thanks for the reply! Were your 25mm just right or do you think 20mm ones would sit flush too?

[@HustleGarageTV]

ProDrift 86 25mm sits really flush, with some lowering, natural camber would tuck them perfectly inside. 20mm spacers would have around a 5mm gap inside the guards. 20mm fills the fronts perfectly.

[@Heyyluis]

why not just but wide tires ? I prefer wide tires on my z plus it looks sexy

[@HustleGarageTV]

I definitely agree. Wheels with the right specs will always win. Spacers are just a temporary for me until i get funds for new set of wheels :)

[@teammember5962]

Can you please show me more videos or photos, I am confuse in 25mm or 20mm want it perfect not to flushout Please help!

[@HustleGarageTV]

Hey! I've got some photos on my instagram (gizelle_z34) if you wanna check it out for some photos. 25mm fits perfect in the rear with a little tuck in the guards, 20mm fits perfectly in the fronts.

[@teammember5962]

Thank you soo much bro, I've checked you Insta but couldn't find much clear photos. Actually I don't want the tire flush more than the fender cut! I need accurate offset for front and rear.. as I can see in this Video the rear Tire is little flushing out but its not clear here so really confuse in 25 and 20mm.. :(

[@jonnnn4895]

Would u recommend same setup on my maxima 6th gen running oem 350z wheels staggered 245/45r18

[@HustleGarageTV]

Oooo that’s hard, it’s depends on what flush offset is for the maxima. Measure the gap between wheel and the fender and that measurement is what size spacer will fill the guards

[@stasKZ]

worst thing you can do to your car if you drive aggressively. but hey its your car if you cant tell it drives like shit with spacers

[@HustleGarageTV]

Mmmm it has been fine, slip on spacers will kill you. Hubcentric spacers are safe, heaps of my friends drift cars and track cars use them and they get beaten the shit out of and they're fine. Just buy proper reputable ones, install them properly and you'll be fine.

[@azmin08]

400z just came out

[@HustleGarageTV]

Yesss! I'm so keen for it hahaha

[@rafaelhernandez7630]

Kind of look the same to me

[@HustleGarageTV]

It definitely fills the guard so much better!

[@bencubelo9325]

Just an FYI - They are illegal and if you have an accident and the assessor sees them, forget about your payout.

[@HustleGarageTV]

Yes that is true, but risk it for the biscuit hey ;)

[@cediepurificacion8480]

You can always take em off before they check out the car

[@kc8653]

Glad to see rice is still alive 😂

[@lelisamohamed4355]

kev mar ur mom

[@HustleGarageTV]

indeed it is and indeed it's a good thing

[@joejones6968]

I highly recommend that you do not use those. That's a disaster waiting to happen for you. Those put a insane amount of strain on your suspension components and especially on your wheel hub bearings. DO NOT USE THOSEZ!!

[@HustleGarageTV]

Joe Jones thanks ! Have heard stories and have stories of my own about spacers. Spacers should only be a temporary thing, as my plans are with these :)

[@Mazda3z]

Joe Jones h&r hubcentric spacers shouldnt cause a problem unless you install them incorrectly and torque to spec. Also checking the lugs the first 100 miles on installing

[@joejones6968]

uh-huh, how about simply not using them, Avoiding a potential disaster in the making, Those were not originally installed onto the car for a reason, That reason is, Is that it severely alters the geometry of the suspension, and creates a great deal of strain on the wheel bearing assembly.There are several videos on you tube showing you what happens when you install these terrible devices onto your motor vehicle.

[@RedVoodoo69er]

Joe... With all due respect, I think you are overreacting a bit. I've run spacers on cars for years and have not had any issues. Are there risks for increased suspension wear? Perhaps, but that's the price you pay for modifications. Don't sweat it.

[@maxim9110]

lmao i run 2” spacers for the angle kit on my 370 and i throw that car around harder than 99% of other 370zs and have had no issues