I like the grille, with the mesh trimmed out to accommodate the winch. Nice touch.
@michaelcurtiss35573 жыл бұрын
Whts it look like
@kamots225 жыл бұрын
Great vid! Just what I was looking for as I’m installing a winch on my 2013 550 Touring & was curious about the wiring part. Thanks for sharing...very helpful!
@indyjones75507 жыл бұрын
Good video. This will help as I am installing a 3500 on my 2015.
@jayanddenissejones66486 жыл бұрын
Great video and very informative! I liked the idea of cutting out the winch plate and reusing it! Great idea
@gobigparts6 жыл бұрын
Thank you and thanks for watching.
@HeartlandMakesAndOutdoors7 жыл бұрын
Excellent install video sir, thanks for sharing and Keep up the fun videos, Subbed you as well.
@gobigparts7 жыл бұрын
Thanks, I will be adding many more. Please feel free to provide feedback.
@jimmydesperado29365 жыл бұрын
Nice work....clean factory look.
@thomasoatman18285 жыл бұрын
Thank on the advice but just so you know you don’t haft to cut it out you can just take the body pins out on the and the grill will come off
@gobigparts5 жыл бұрын
Correct. I stated that but I wanted a cleaner look so cute it out so I had a smaller opening around the winch.
@johnthomson83324 жыл бұрын
Good vid, did the winch bolt right up to the frame of the quad or did you have to install a bracket for the winch. I'm planning on installing a winch for plowing snow.
@gobigparts4 жыл бұрын
Bolts right up. No additional bracket. We now sell KFI ones for Polaris that are plug and play
@billsmith1475 жыл бұрын
Thanks for the video. I have watched it several times. I am going to be installing my winch on the same vehicle this spring. If I understand it correctly you connected the two wire adapter coming from the contactor and connected it to the 570's wiring harness 2 wire adapter, and then connected the handlebar rocker switch 3 wire adapter to the machine's wiring harness? If I understand correctly the handlebar wiring was already prewired to the ignition wiring? Thanks
@gobigparts5 жыл бұрын
Your correct
@89kevino6 жыл бұрын
Great video, very instructive, I plan on putting a winch on my 2018 450 and it looks identical, only question I have is how and what did you use to cut out the hole in the front, I think that looks awesome like that. Thanks alot
@gobigparts6 жыл бұрын
I believe I just kept going around it and scoring it with a retractable razor knife like you would get at a hardware store.
@89kevino6 жыл бұрын
Oooh ok that's sounds like it would work and be pretty simple, thanks for the fast reply!
@gobigparts6 жыл бұрын
Not too bad because the material is already thinnner around where you make the cut just for that reason.
@billsmith1475 жыл бұрын
Did I miss you disconnecting the battery, before you started the install process?
@gobigparts5 жыл бұрын
I missed that. Yes, always disconnect your negative cable from battery.
@es477 жыл бұрын
Good video bud But its winch not wench every time you say it think wife is gonna come out and hit you with a shovel lol
@gobigparts7 жыл бұрын
shaun schollaert You noticed that. My wife always correcting me. Lol. She can be a real wench then I have to use the winch. The quad that is.
@stevo01955 жыл бұрын
That Milwaukee fuel impact tho. Very nice. Thanks for the video very helpful.
@robtaylor44494 жыл бұрын
Great video! Thank you! What did you use to cut out the grill?
@gobigparts4 жыл бұрын
I beleive it is scored from the factory. So you just keep going around it with a razor knife until you cut through and it pops right out.
@erikdesormiers94586 жыл бұрын
Noticed you passed the cables close to the radiator, any issues so far? I’m just concerned with the heat on the wires. But there doesn’t seem to be another way to pass the wires... any tips?
@gobigparts6 жыл бұрын
I looked at it last night and the wires pass around the outside of the radiator and then a ways behind it. They are not touching the rad and one of the wires are in a loom. I have had no issues. The stock voltage regulator and wires for it are closer than my winch wires. No issues.
@buletpoint4 жыл бұрын
Did you need to disconnect the battery at all? Just asking I have to install my 570 winch tomorrow
@gobigparts4 жыл бұрын
Could have but I did not. Always safer if you do.
@buletpoint4 жыл бұрын
@@gobigparts Thank you great video.
@buletpoint4 жыл бұрын
@@gobigparts I did the same way you installed yours this afternoon, worked perfect. Only issue will be the 100 hour diff service, I will have to unbolt and pull winch forward to access the fill plug..
@michaelatwood32254 жыл бұрын
Looks good
@427Ron5 жыл бұрын
That looks good
@MegaDpenner6 жыл бұрын
Will any winch fit or are bolt holes set up for a polaris one. Thanks for posting. Just bought a 2017 570. First thing i did was a battery tender now its winch time. Definately like the grill panel on. Thats what ill do.
@gobigparts6 жыл бұрын
You would need to find a mount kit for what ever winch you purchase. Then do your own wireing. That is one reason I just went with the Polaris one. Plug and play.
@liamcalhoun25986 жыл бұрын
Doug Penner all you need is the Polaris mounting plate but any ATV/UTV winch will work. My question is if the orange wires are your ignition wires in a 2017 sportsman
@gobigparts6 жыл бұрын
I used a multi meter on the post terminals under the cover in the storage box to see which one had power when turning the ignition on. If you follow my video I installed it on the that one.
@MrMjrRage5 жыл бұрын
Hi Doug. I wanted the Polaris winch for the simplicity of wiring and mounting, as everything is already plug and play. That said, up here in Canada the dealership wants nearly $700 for a 3000 lb. winch kit. I went on Amazon.ca, purchased the mounting kit for $50, went to Canadian Tire and bought an ATV winch (4000 lb. Warn knock off made for Canadian Tire) for $150 on sale, went through Amazon to upgrade to a synthetic rope ($35) with a line stopper ($12) to make it lighter and less prone to rust. Because this was an actual atv/utv winch, it came with the mini rocker switch and everything needed to do a stealth install. It took about 45 minutes to mount and set up the winch in the bracket with the fairlead. (The Polaris bracket also comes with hardware). The only drawback is the wiring included is longer than needed, as it is designed to go to the back where most manufacturers put the battery. You can either loop it up or shorten it and install new loop connectors. Following the above video, it is a snap to install and I saved over $400 from using the Polaris set-up. The only difference is when you choose a winch, the Polaris mount is designed for the universal 4 hole mounting pattern. Make sure the winch is going to line up. Also, Polaris winches for the 570 are inverted from the factory, so conventional winches will mount upside down. No biggie, just the stickers will be upside down and you need to run the winch line completely to the end and re-set it in reverse (or just be aware that the button in/out will be backwards). Saved a ton, for a little bit of extra work, and got an extra 1000 lb. capacity (overkill).
@wattyd68674 жыл бұрын
@@MrMjrRage I'm also in Canada (BC) and its outrageous how much polaris wants for a winch! I havent bought the machine yet, just getting ideas of add ins! The 570 premium here is $9555 plus the tax.
@hectorhernandez46305 жыл бұрын
How much was the winch?
@markpaezjr13186 жыл бұрын
Im wanting to get one for my bike to it looks preaty easy i have never put one in so i dont know what to expect are do i need to know my wires i dont want some body to do it and charge me for it get back with me mark thank you
@gobigparts6 жыл бұрын
Mark Paez Jr pretty much plug and play. Red goes to positive black to negative.
@upnorthvlogs5 жыл бұрын
Kinda hard to here you is this a Polaris winch I bought same machine would like put one on it
@gobigparts5 жыл бұрын
Yes Polaris winch like package shows.
@upnorthvlogs5 жыл бұрын
Missed that part awesome thank you
@joseRodriguez-hr3ii4 жыл бұрын
How much did it cost
@wattyd68674 жыл бұрын
What your opinion on the 570?
@gobigparts4 жыл бұрын
Love it.
@wattyd68674 жыл бұрын
@@gobigparts no issues at all?
@davelester33575 жыл бұрын
What model and part number, just bought a 2016 570 efi sp, needs a winch...errrm wench 😂
@Cooked796 жыл бұрын
Where did you purchase your winch?
@gobigparts6 жыл бұрын
I have a comercial account through my dealer. I can quote one for youif you would like.
@Cooked796 жыл бұрын
Go for it
@gobigparts6 жыл бұрын
Shoot me an email at randy@gobigparts.com and your zip code.
@tomvana42704 жыл бұрын
WINCH not wench! Get it right.
@landscapenurserygrower27664 жыл бұрын
W i n c h not wench
@aaronwitner20016 жыл бұрын
Can not hear what you are saying
@gobigparts6 жыл бұрын
Yeah, I need a different camera I think that can have an external lapel mic or something plugged in.
@j.whisper23793 жыл бұрын
Made in China!
@gobigparts3 жыл бұрын
Probably just like all of our gear.
@j.whisper23793 жыл бұрын
@@gobigparts ! All you conservatives hate Socialism, but don't mind giving American Bucks to a Communist country! LOL!
@gobigparts3 жыл бұрын
@@j.whisper2379 not everyone in the US is a conservative.
@j.whisper23793 жыл бұрын
@@gobigparts ! So, are you a liberal? Many people that are partial to mudding with ATV's are from the South. At least that is my impression from the videos. The south is a big part of what we call the bible belt. The bible people tend to be conservative, anti vaxxing, science hating, climate change denying, evolution deniers who support Trump. Look at Florida and Texas. But as long as you can get your toys from China, things are cool??
@gobigparts3 жыл бұрын
@@j.whisper2379 I usually shy against political talk on my youtube channel, but if you want to send me an email feel free. I don't live in the South much further North. YOu can find my email address on my gobigparts web site.