INSTALLING A K&N COLD AIR INTAKE ON A 2015 FORD FUSION ECOBOOST

[@ReynoldsRides]

I made a video of me racing this car in my ‘89 Corvette. Check it out: kzbin.info/www/bejne/bqeke4R6friWgrM.

[@twistedproductions2959]

I have the 2017 Ford Fusion se with 2L ecoboost and turbo. subbed plan on getting this mod and loved this video!!!!!!

[@TheRichgod100]

Just installed mine on my 2014 fusion Titanium! A cool trick I realized is if you remove the sound deadening material on the hood, the induction noise is wayyy louder in the cabin.

[@Yepppppppp533]

My 2016 Ford Fusion gained 8.4 horsepower when tested on a dyno literally across the street from my work lol and it may not be much but I did notice a lot faster boost response and the sound is pretty impressive especially with a blow off valve. May not be much but better then nothing.

[@dennisrobinson8008]

Now use something like the delta deltaboost and gain even more.

[@GBDogg504]

2 days ago I installed this K&N cold air intake on my 2015 Fusion Titanium eco. So far I'm impressed with the upgrade. The Turbo sounds ALOT better and there is a noticeable increase in HP. The car seemed more responsive immediately and this was just normal city driving. I live in Ca so I have Carb legal 50 state version. K&N includes a carb legal sticker with stamped EO# for state smog inspection. I placed that sticker right on the casing in front of the air intake. This will be the only small performance modification I do to the car.

[@joeymatthews5817]

Fun fact about the fusion 2.0 eco boost (I have one myself) you can adjust the turbo solenoid to push out more psi. I just got this intake and with the turbo adjusted, and intake it’s pretty zippy

[@stopthecap8679]

how?

[@joeymatthews5817]

@@stopthecap8679 if you look at the wastegate there’s two nuts. Adjust them to get closer to the wastegate and gold

[@hangrymachinist]

Is there any chance we can get a review after having it installed for 3 years?

[@bastiansnow]

X2

[@dannyjr7997]

A step bit is pretty cool for many types of holes.

[@vincemartinflying]

Tbh, sounds gr8 but sport mode actually adds no horsepower. It just stiffens suspension and tweeks throttle control

[@TheCody1255]

They knew that…

[@danzhangy2343]

Was the car completely stock before the CAI? Or did it have a bov? It sounds crazy for just one mod

[@ReynoldsRides]

Completely stock.

[@Brushyip]

Do you need an eco boost engine for this?

[@jfk963]

Con esos filtros no aumenta el HP pero si notas que la aceleración está mejor

[@matthewsetzer9896]

Where are you guys at ,it looks beautiful

[@heavensector5964]

why did u do a third gear run when 4th is the 1:1 ratio?

[@Tjluberda]

You add a catch can??? Just bought a new 2020 and was wondering if you know about the dfi flaws.

[@Tjluberda]

Need this upgrade for sure. Good video. She sounds a bit nasty she can breath a bit better.

[@pataizud]

Hi RR....Mine called Mondeo here in Malaysia, same engine as yours 2.0 Ecoboost 2015...if you dont mind to share what is the part no of those K&N open port....thanks

[@ReynoldsRides]

What else should Trevor do to his Fusion? Tuner?

[@BasementBrosss]

Caliper covers?

[@scojo]

Spinners

[@jaytulewis6093]

Straight pipe it ‼️‼️‼️‼️

[@GBDogg504]

Steeda front strut bar 179$ and Steeda strut hood lift kit 120$ If you're gonna go all out and spend$, also get Livernois performance tune, rear sway bar and Steeda performance shocks installed in addition to the first 2 things mentioned.; Also maybe upgrade your tires if needed.

[@thegreatkeys]

I have a 2015 ford fusion se with a 1.5L eco boost engine It should be turbocharged will it fit in my car?

[@scojo]

I miss the Fusion already.

[@oz_medias]

So much potential, such a great ride and diversity that make each car unique, even though there are millions out there.

[@poppinxxbobaq873]

Will it fit in a 2017 fusion titanium? Ur engine looks the same but on the website it says it doesn’t fit

[@305Navi]

Hello and thank u for sharing this vid. Will this kit also fit a 2014 Lincoln MKZ V6 3.6L AWD engine? I think the under engine set up are the same in both the fusion and mkz.

[@BasementBrosss]

That is a sick Fusion.

[@evanrichley7506]

Im a little new to the car scene i just turned 16 and bought my parents fusion off of them and one question is do i need to live in cold climate to use a cold air exhaust ik its a dumb question but i figured i should ask

[@ReynoldsRides]

No sir, no cold climate required.

[@yanceybarker6411]

Not a dumb question. You may have helped others get an answer that were also afraid to ask. I live in Cali and a lot of people have these cold intakes. This might have to be my next install.

[@angelconsuegra7196]

It’s only work for the acoboost ? How about the 2013 SE ?

[@maddednandhighlights2285]

Does anybody know where I can get a wide body kit for a 2017 Ford Fusion titanium

[@jackzhao604]

Ss tuning

[@waynenation678]

Is it worth the money?

[@ItsDanielMendez]

2:19 the disappointment in the audience 😂

[@madmax3078]

Unibit next time for the hole.

[@AkronKid330]

Do you have any other mods? I wonder if a tune would do anything

[@ReynoldsRides]

No other mods but, yes, a tune would definitely wake it up even more.

[@Bowlhitta420]

Do they make them for fusion 2020 2.0

[@BrysonLanez]

Did it ever throw any codes?

[@ReynoldsRides]

Nope!

[@DawnsgraceK3]

Should be about the same install on a 1.5L 2017, correct?

[@ReynoldsRides]

I would think so but not 100% sure.

[@SawyerSolecki05]

I wish I could do this to my ford fusion hybrid😭😭

[@jasonandsummer5109]

How good does it seal against hood so hot air doesn't get in im torn between this one a d the steeda

[@ReynoldsRides]

It seals pretty well. You’ll probably get a little heat soak but nothing too bad.

[@deancrudgington1304]

I just fitted the steeda one, looks good but I think this one is a better product. Looks like it fits better but the steeda one is sheiled from the engine bay

[@twoslow121]

Does this k&n kit fit the 2017 2.0

[@ReynoldsRides]

This kit is for a 2013-2016 Fusion but I’m sure you can find one for a 2017.

[@MBE_KB]

Same. Where Can I Get One For The Ford Fusion 2017?

[@jacebrown7825]

Where can I get a 2017 one?

[@roshanramoutar4795]

I have a non turbo fusion will it make sense upgrading to this k&n filter

[@ReynoldsRides]

Yes! It helps any car breathe better. kzbin.info/www/bejne/b4TFY2qgdqmjj9k

[@roshanramoutar4795]

@@ReynoldsRides but I can't install a bov right

[@brysonjones2945]

@@roshanramoutar4795 correct

[@channelz3363]

Sounds great...

[@scottski51]

Cold air intake kit.... and there's snow everywhere!

[@carranza828]

Were you running on premium gas?

[@ReynoldsRides]

Yes.

[@dawsontavares784]

Where did you get this package from?

[@ReynoldsRides]

Amazon. There’s a link in the description.

[@Amir.S1KRR]

v6 or 4 cilinder?

[@ReynoldsRides]

4

[@Jerone5740]

let your engines breathe. I have one in my 2013 Taurus SEL and I love the whistle and growling but if your always on the gas then you will need lots of gas

[@nathanbrown8279]

Diesel or petrol?

[@Squigglesone]

What was the engine size of the fusion?

[@ReynoldsRides]

2.0 liter.

[@oMAASADAZo]

Can I use this kit for my 2018?

[@ReynoldsRides]

Probably not this particular kit but I’m sure K&N makes one for a 2018.

[@felipeborrero1489]

You should not have a car if you have el che guevara as your profile pic

[@mmahtnart8986]

You should have bought a tapering bit.

[@stephengoad3091]

I didn't see anything about MPG.

[@nav6593]

will it improve mpg?

[@ReynoldsRides]

Maybe a little.

[@christopherballesteros377]

Did installing this cause a check engine light?

[@ReynoldsRides]

Nope!

[@OGMrE]

Hooning on Redwood RD....

[@gb342002]

No shot you notice the difference in power

[@kcleach9312]

just because the air intake company puts a paper with a graph saying it gives 10 more horse power doesnt mean its true!

[@Yepppppppp533]

My 2016 Ford Fusion gained 8.4hp when tested on a dyno so it does increase may not be much but I did notice way faster turbo boost as well.

[@Jaedified59]

MY CAR MAKES TURBO NOISES IGE BEEN TRYINH FOR SO LONG

[@rellstuttin9198]

That looks like Saratoga or eagle moutian

[@ReynoldsRides]

It does, doesn’t it? 😉

[@stevenfitzherbert8718]

Another hot air intake

[@quentin9165]

Lol under $200!! It’s 2023 now and it’s $400

[@oscarcordova8052]

Is this in utah? Lol

[@scottcarlson2620]

More air flow doesn't get you better gas mileage more air = more fuel

[@yanceybarker6411]

I just replace(d)* my stock grill and my gas mileage went up. I work right down the street so I was only getting 16mpg. Now I am getting 17.7 mpg for the city and 28-32mpg for the highway

[@davidtapia1550]

@@yanceybarker6411 for real? I was thinking of getting a new painted grill

[@yanceybarker6411]

@@davidtapia1550 sorry. Was out of town for the past 4-5 days. And yeah. I love my grill. It’s a honeycomb design and the spacing gives the engine a little more air. As long as you don’t drive like a full asshole (like me) than you will be fine. Haha. But I recently got like 18.6 mpg

[@Mr572u]

ricky racer 2.0🤪

[@MrZdvy]

This will add ZERO hp. They call this a cold air intake but in reality it’s not because it’s taking in warm air from the engine compartment. These products are being sold based on a myth, all you are doing is adding a sucking noise.

[@ReynoldsRides]

I disagree. Heat soak is very minimal since the hood provides a seal over the top of the cold air intake and the factory plumbing that routes cool air to the intake from the fender or the bottom of the car is still in place.

[@MrZdvy]

Reynolds Rides If that’s the case then a different type air filter is really all that has changed. The incoming air doesn’t care if it’s routed through a square or a round air filter.

[@ReynoldsRides]

The engine is breathing better by bringing in more air through the bigger, higher flow filter as well as a bigger intake tube. Every kit can be a little different but the overall concept is the same. More, cooler air = more power.

[@MrZdvy]

Reynolds Rides The engine only uses that amount of air it needs. If all else remains the same (valve timing, port size etc) a bigger intake tube by itself will not make more power. You mentioned all the factory plumbing is still intact, how does it get colder air?

[@ReynoldsRides]

At the end of the day, dyno results don’t lie. We can go back and forth on this but if you research it on Google and KZbin, there have been numerous dyno tests done that evidence that cold air intakes and high flow filters increase horsepower.

[@brandyduket1810]

Can I do this on a stock 2013 ford fusion 2.0 ecoboost with a stock turbo?