Рет қаралды 9,517
Like my electrical system, just to make things a bit more digestible, I decided to split up the installation of my water system into a few short videos, then later down the line I’ll do an overview video of the entire system.
It might seem like a bit of a strange place to start with the water pump, but it made sense in my head.
In this video I mount both the water pump and the accumulator and then fix some 12mm water pipe across the van ready to be hooked up to my tap and shower system.
I then looked at wiring the pump up to a simple on/off switch as it doesn’t need to be turned on unless I need it.
If you have any questions feel free to leave a comment below.
www.greenhorncountryclub.co.uk/post/water-pump
Materials used:
Water Pump - www.ebay.co.uk/itm/352302362755
Accumulator - www.ebay.co.uk/itm/124980215411
12mm Water Pipe - amzn.eu/d/6Mrzvti
Ball Valve - www.ebay.co.uk/itm/394023700114
T-Connector - www.ebay.co.uk/itm/185027959815
20mm Pipe Clips - amzn.eu/d/8iTzTKN
12mm Jubilee Clips x6 - www.ebay.co.uk/itm/281955639394
On/Off Switch - www.ebay.co.uk/itm/261513977084
1.5mm Cable - Red - amzn.eu/d/dm98QAJ
1.5mm Cable - Black - £amzn.eu/d/0n3ouUO
TOTAL: £148.65
You can now see a full breakdown of costs here: www.greenhorncountryclub.co.u...
More content at: www.greenhorncountryclub.co.uk
Follow on Instagram: bit.ly/3sEasQG
Chapters:
0:00 - Intro
1:02 - Components
1:47 - Fitting pump in place
3:02 - Connecting pipe to the pump
4:27 - Fitting ball lever valve
5:18 - Fitting the rest of the pipe
6:58 - Wiring up pump plan
8:29 - Cutting, crimping, heat shrinking wires
10:48 - Wiring up pump
12:54 - Testing the pump