Installing a Trailer Brake Controller - 2018 Silverado

[@thecountrylivingproject3263]

Components used in this video: - CURT 51140 TriFlex Electric Trailer Brake Controller amzn.to/3AJLIcp - CURT 51451 Quick Plug Electric Trailer Brake Controller Wiring Harness for Select Chevrolet Silverado, GMC Sierra amzn.to/3arrpFI Purchases via the above affiliate links may earn the channel a commission. Thank you for your support.

[@joedickerson9973]

Thank you for this video! It was the only one I could find that showed me exactly where the plug was plugged in.

[@thecountrylivingproject3263]

Glad I could help

[@TheBikericonify]

Thanks you saved me 250 dollar install at u-haul

[@thecountrylivingproject3263]

Great to hear!

[@frankvaughan1232]

Great video and it worked perfectly for my 2017 tahoe

[@tho464]

Thanks for the video. Just ordered through your links as I have the same 2018 truck. Cheers!

[@thecountrylivingproject3263]

Much appreciated and good luck with your installation.

[@kcremers]

I opened my box and the plug-in spot was already taken. I have a 2018 1500 LT. No brake controller stock or aftermarket. It’s the same wires and plug. Wires run straight down under the carpet. Any thoughts on what this could be?

[@thecountrylivingproject3263]

Sorry, I don't know what it could be. Is it a previously owned truck?

[@rogervonschleusingen4603]

THANK-YOU VERY MUCH SIR, YOUR A GENTLEMEN !!

[@licjesusramirez9757]

Thanks you so much

[@mayef2348]

I have a cushion the electric brakes only works with the brake controller?, I dont have a break controller in my truck and the electric brakes in my trailer does not work.

[@hav1byte]

awesome video thank yoo

[@thecountrylivingproject3263]

No problem. Hopefully it helps you out.

[@goodbrother79]

I had that controller before I hated that it flashed everytime I hit the brakes. Traded it out with a Tekonsha P2.

[@darrenturner9900]

Thanks for the information, I would have been looking for hours lol 👍👍

[@waydealf1969]

Great video!! It's the same for my 2019 Silverado 1500 LD "Legacy" Custom.

[@imbrandon16]

That’s the truck I have I’m always wondering if 2018 stuff is gonna fit my 19 LD properly lol. Thanks for the info 👍🏻

[@TheKellisunshyne]

Does curt make custom wiring harnesses? I.e would I be able to buy this set up for my 99 GMC suburban 2500?

[@thecountrylivingproject3263]

The harnesses made for specific vehicles (what I would refer to as custom harnesses) are for those that are brake-controller-ready, for example the one I used in this video. However, I don't think your year Suburban has the available port to use (not brake-controller-ready), in which case you would need their universal wiring adapter. One end plugs into the controller, the other end doesn't have the clip, just separate wires that need to be spliced into your existing wiring under the dash.

[@TheKellisunshyne]

@@thecountrylivingproject3263 My vehicle has one, it's a 2 pin plug in that is located on my relay panel in the same spot as yours but it's a different panel and the place where the harness would plug in says NAT...I used my power probe to verify that its tied into my brake switch circuit (when i push the brake pedal in I get battery voltage and when the brake pedal is not pressed in I lose battery voltage). The problem is i cant find any one that sells the harness that is specific to my year, make, and model. Thanks for the video as well as your input but I think your right about needing to splice into the brake circuit.

[@scottyterrazas]

Why not use the oem brake controller?

[@thecountrylivingproject3263]

The truck didn't come with an OEM controller installed, and apparently you can't add an OEM controller afterwards on the Silverado. Not that I don't think it couldn't be done but if so it would for sure require much more time and expense.

[@daakrolb]

I definitely forgive the shaky video. It’s a big enough pain to get these jobs done without having to hold a camera also!

[@dcyphrz8532]

How can you tell if the vehicle is controller ready?

[@thecountrylivingproject3263]

Probably best place to check is the owner's manual. If that doesn't help, I'd try Google search.

[@dcyphrz8532]

@@thecountrylivingproject3263 Thank you sir. :)

[@tyler560]

What is the weight of your camper that you pull? How does your Silverado handle it ?

[@thecountrylivingproject3263]

The camper is 28 ft. with a dry weight of 5,225 lbs. No problems with the towing at all. My truck has the 4.3 liter V6. Rated towing capacity is 7,600 lbs for the truck but I think if I were to haul something closer to that maximum it might struggle a bit.

[@tyler560]

@@thecountrylivingproject3263 Thank you for the reply! I have the 5.3 v8, I just didn't want to get something to big and have the truck struggling to pull it at 65mph.

[@jeffpontius50]

Where did you get your wire harness adapter?

[@nikkisims1478]

My daddy left me his 2006 chevy I had a friend remove it cause it was sparking now my breaks have slowly but horribly gotten louder and worse than ever, even after a 1700 dollar trip to the local tire/break shop

[@sergiodelatorre6097]

Thanks for making this video but I was wondering if you can help me out, I got this same set up for my 2018 silverado but for some reason once I was done installing it there's no lights on the unit

[@thecountrylivingproject3263]

I haven't run across that issue. I guess check to be sure the harness is plugged all the way into the port under the dash, and also fully inserted into the cord coming from the unit. Could also be you have a bad adapter cord, or a bad unit overall.

[@sergiodelatorre6097]

@@thecountrylivingproject3263 Thank you for the advice, I sent the unit back and ordered another one and I'll make sure all the connections are in all the way. Thanks again for the reply 👍🏼

[@kenj.8897]

Thanks for your very informative vid , i have to do this today on my Chevy . 2020 though , im sure its probably very similar .Thanks again .

[@thecountrylivingproject3263]

Good luck with your install. Thanks for the comment.

[@fredwood630]

My truck has one which function makes that part because I never touched it

[@tahoetom9932]

You would rather buy a new car because of soldering 4 wires??? Wow

[@jordaneaves8348]

Rich

[@TF856]

Easy and so dangerous and suicidal.