I am about to buy the same bike next week and i cant wait. 2015 zx6r anniversary edition and first thing im going to buy is a two bros exhaust :D
@richie63665 жыл бұрын
That's awesome it's a great bike.
@horizontide5685 жыл бұрын
Thanks for the vid man. I'm about to install the m2 on my 2019 zx6r. Appreciate the detail you go through of explaining every step bc I've never changed out an exhaust before.
@richie63665 жыл бұрын
Your more then welcome it's a peace of cake to install. Thanks for checking out my video.
@zayacrawford1712 жыл бұрын
nice vid man! those two bros shorties sound really good🔥🔥🔥
@richie63662 жыл бұрын
It sure does I love the sound.
@John-kr7iz7 жыл бұрын
man that's one clean bike
@richie63667 жыл бұрын
Thanks john
@davewinkworth74607 жыл бұрын
That looks awesome Richie. I wish I was on the bike instead of you next time you go out. Have lots of fun Richie enjoy the rest of the day.
@richie63667 жыл бұрын
lol thanks Dave and i sure will.
@michaelregan65686 жыл бұрын
Thanks for your quick reply Richy..
@vetgamer13206 жыл бұрын
Great Video! Thank you for taking your time to make it!
@richie63666 жыл бұрын
Thanks Chris.
@V-TecHondaLove5 жыл бұрын
Good job man, it sounds great.
@richie63665 жыл бұрын
Thanks it sound even better in person.
@YouOmie16 жыл бұрын
For some reason my link pipe won’t fit in the header pipe? Any tips?
@richie63666 жыл бұрын
There is no reason why it wont fit as long as the exhaust is for the bike you have.
@michaelregan65686 жыл бұрын
Shouldn’t you also remove the catalytic converter from the head tube when you put on a slip on exhaust or is it up to the individual?
@michaelregan65686 жыл бұрын
Just saw a comment that the big box is the catalytic converter. It’s not the two converters are in the exhaust head tube. To remove they have to be beat out.
@richie63666 жыл бұрын
yes i did remove it, the kit came with every thing you need to install it with out the catalytic converter i don't think it would sound as good with it on even if you could install it with it on.
@TacticalNinjaGaming4 жыл бұрын
i know im a little late to this video but.. i recently traded up(but backwards in year) for a 2014 636. my question to you, because i am looking to change my muffler as well, is where is that little mounting bracket?(the one you mount the clamp too for the muffler). is that something you had to attach to the rearset? im just trying to figure out what bolt you are talking about at the 11:40 mark
@richie63664 жыл бұрын
It's been a while since i installed the muffler. It's the bottom bolt of the rear brake leaver mount ,the instructions that come's with the exhaust kit should help a bunch. if you go with the two brother exhaust you wont be sorry they sound AWESOME!! I hope i was able to answer your question.
@Mannyfresh_6 жыл бұрын
I just recently installed this same pipe on the same bike. But now my horn doesn’t work? Do you know or anybody know what I did wrong?
@jacoblloyd88516 жыл бұрын
thanks for the video
@richie63666 жыл бұрын
Jacob Lloyd Your welcome hope it helped you out.
@Jaron225 жыл бұрын
Entertaining and fun video.
@richie63665 жыл бұрын
Thank you
@QuadSquad-ns1cg5 жыл бұрын
Can you do a video of how to re install the stock exhaust?
@lueyb126 жыл бұрын
Did you tune the bike after? Hows it running??
@richie63666 жыл бұрын
I didn't need to tune it up its running great.
@ryanjohnson37076 жыл бұрын
Can you post pics of the clearance you have on your swing arm, and the angle mid pipe? I'm having issues getting everything lined up, without the canister hitting the swing arm. This video helped immensely. THANK YOU.
@richie63666 жыл бұрын
I took the canister off with out it you'll have alot of clearance.
@Logannorth19886 жыл бұрын
Ryan Johnson what was your solution to the slip on touching the swing arm? I installed mine tonight and it's basically touching the swing arm. Is there any sort of order you should tighten things down so this doesn't happen? Thanks!
@richie63666 жыл бұрын
leave all the bolts and clamps lose, look over it and adjust every thing so it dose not touch or rub anything, you might have to give the short pipe a bit of a twist and then start tighten if you need to pull the pipe away as you tighten every thing that should work and enjoy the sound.
@Logannorth19886 жыл бұрын
Richie 636 thanks!
@mburns45516 жыл бұрын
My now dream bike!!! Sounds amazing!! Did you feel an increase in power after the installation?🏍🏍🏍🏍🏍🏍🏍🏍🏍
@richie63666 жыл бұрын
M Burns i really haven't felt any difference in power but the SOUND OMG. lol this is my dream bike for sure.
@mburns45516 жыл бұрын
Richie 636 thanks so much for the feedback. Much appreciated. Again. Absolutely gorgeous bike🏍🏍
@richie63666 жыл бұрын
Thanks and thanks for watchin my vid M Burns
@BernardVisagie6 жыл бұрын
That big box is called a catalytic converter.
@neorabado89906 жыл бұрын
Bernard no it's not it's called a prechamber
@koonhunter666 жыл бұрын
Does the slip on give a check engine light ?
@richie63666 жыл бұрын
It will if you don't install a servo buddy, if the check engine light still stays on try unhooking the - and + from the battery for 5 or 10 seconds hold them both together DO NOT TOUCH THE BATTERY WITH THEM and that should help.
@zeus48845 жыл бұрын
What happens if you mess up the gasket?
@richie63665 жыл бұрын
You'll get a exhaust leak, it would sound like a hissing sound.
@calir66057 жыл бұрын
Nice bike
@richie63667 жыл бұрын
Thanks cali
@ChaomPR6 жыл бұрын
Those rear set bolts are incredibly tight. I can't get them out
@richie63666 жыл бұрын
Ricardo i think the bolt that your talking about have some lock tight on them so you'll have to give them a bit of a humf.
@ChaomPR6 жыл бұрын
Richie 636 yeah I went to the store and grabbed myself a better tool for it. They were definitely nice and tight and had that pink substance on the thread which I'm guessing is the lock thing. I got it all on nicely relatively fast thanks to your vodeo
@richie63666 жыл бұрын
That"s great im glad my vid helped Ricardo.
@cavemanproductionsXD7 жыл бұрын
Sexy bike man !
@TeamAssassin1295 жыл бұрын
Video started off great but as it went on, it seems like he got lazy with explaining and showing things. At times he was confusing and hard to understand. Also didn’t show how to install survi buddy. Video was ok.