Installing a Whirlybird on a Metal Roof: Step-by-Step Guide

Buy from here: roys.au/reside...
This video demonstrates the installation of a whirlybird roof ventilator on a trimdek metal roof.
DISCLAIMER: always wear gloves and other PPE (personal protective equipment), the person in the video has a lot of experience.
A whirlybird ventilator exhausts heat from a shed without using electricity. For large sheds, a second ventilator may be required to properly exhaust the head.
Reduce temperature in shed
No electricity required
Quiet
Colours to match your shed
Removes the hot air trapped in the roof of the shed
Reduces the condensation and dampness of the shed
See: royssheds.com....
--
If you like these types of videos and would like to see more of them, please like/subscribe and let us know what you would like to see :)
Please let us know if you have any questions or if you have any recommendations.
--
Required Tools:
Marker
Impact Driver (tek gun) & teks
Left and right tin snips
A Level
Roof and Gutter Silicone
--
Steps:
1. Place the whirlybird so that it overlaps the ridge cap.
2. Use the whirlybird base as a template and mark a circle.
3. Make a hole and circle using snips.
4. Remove any teks from the ridge cap.
5. Place the whirlybird base under the ridge cap.
6. Bend the sides over the sheeting ribs.
7. Tek the whirlybird base into place.
8. Cut and bend the whirlybird base in accordance to the sheeting profile.
9. Use silicone to prevent leaks (note can also install underneath the whirlybird base for extra leak prevention)
10. Place the whirlybird tube onto the base
11. Level the whirlybird and place teks to ensure it does not move.
12. Install the top whirlybird.
--
--
Perth Wide Custom Steel Shed Suppliers and Builders
Website: royssheds.com.au/
Phone: [phone]
Online Quote: royssheds.com....
Song: Flying High by Fredji @fredjimusic
Music provided by Free Music for Vlogs • ** No Copyright Music ...

[@RoysSheds]

You can buy whirlybirds with the square base from here: roys.au/residential-whirlybird-300mm-throat-sky-axis-wind-turbine/

[@Lozzie74]

Thanks for the succinct but clear demonstration. I installed 2 whirlybirds in my shed today using your video as a guide. All went well.

[@frustratedmajority851]

Finally! Thanks. The chicken coop desperately needs this but the steel roof was the first hurdle.

[@austinroberson8]

Dude you have obviously done this many times before. Cutting that metal without gloves makes you a brave man in my book. Last time I cut galvalume without glove I got 6 staples.

[@SeanLarkan]

Brilliant demo many thanks - simple, to the point, just what we all look for; appreciated!

[@texputter7928]

Thanks for posting this, I've been racking my brain trying to figure out how to do this right on a metal roof!

[@RoysSheds]

No worries, glad we could help :)

[@Richism4U]

Thank You for posting this video. Saved me incredible amount of prep time.

[@RoysSheds]

No worries, have a great one :)

[@kidsliketolearn]

Thank you. Excellent video

[@andrewjones1471]

Great Video Roy seen them done with the base plate on the underside. OMG what a pain that would have been. Well done thank you.

[@popoymotmot]

Will it not spin if it’s not level?

[@sunstateroofingservices]

Very nice work, quite well done

[@gerardred8147]

Thank you. Excellent practical demo.

[@esp224]

Thanks .What do you do if where it is going the the ridge cap is not 90 degrees to the way the galv is running ….Cheers

[@haideralimohammad1009]

Good job thank you for this video you made it very easy for me

[@Bertanerny]

Thanks, great video

[@murraywild9748]

Would sealing the lower edges trap in the condensation that forms and therefore should be left unsealed?

[@MrArvin0306]

Can a strong rain with fast wind get inside that ventilator?

[@edone6663]

Question! I can use this method to install a solar fan? Please help! Thank you

[@RoysSheds]

It should be similar, however we have not installed a solar fan yet. Best to have a look at the instructions that come with the solar fan.

[@edone6663]

@@RoysSheds I appreciate it Thank you

[@shawnbeasley9377]

Please, Where do you find that model base, all that ones Im finding are not square like the one you have shown in the video? The one you have is EXACTLY what I want! Do you have a part number and or a supplier for it so that I can order one? I live in Texarkana, Arkansas United States and can not find a square base like the one you installed in this video?

[@jordanherrin4525]

Where can i buy this same whirlybird setup?

[@RoysSheds]

Here you go: roys.au/residential-whirlybird-300mm-throat-sky-axis-wind-turbine/

[@crisantoap]

i've always wanted to install the same. i'm just curious, is there any chance rainwater might get into the vents and inside the roof?

[@酎ハイ飲んだらいい感じ]

Yes

[@Alektrueon]

Thanks for the video. I am trying to find a whirlybird with a square base like the one you have. Everything seems to have an octagon base can you tell me what manufacturer and model that whirlybird is that you used? Thank you

[@philipberg5138]

This product is not a Whirlybird brand turbine. Those units do not use plastic bracing like the one shown in this video. Go to Lomanco.com and check out the vent resources tab. Look for the install sheet for metal roof turbine installation. Color photos, should answer your questions.

[@SimsRacing]

Where did you get the turbine with the square base that fits both top corners under the ridge vent?

[@RoysSheds]

Buy from here: roys.au/residential-whirlybird-300mm-throat-sky-axis-wind-turbine/

[@artanderson9341]

Where do you buy the square base?

[@RoysSheds]

roys.au/residential-whirlybird-300mm-throat-sky-axis-wind-turbine/

[@beno4030]

Hah, like the safety boots with no laces :)

[@joeyrodriguez2809]

Where do you find that model base, all that ones Im finding are not square like the one you have shown in the video? The one you have is EXACTLY what I want! Do you have a part number and or a supplier for it so that I can order one? Thanks Joey Rodriguez

[@billmonroe8826]

"page not found" for your whirlybird.

[@RoysSheds]

If you like, checkout the time-lapse this shed getting build here: kzbin.info/www/bejne/fXysfIpvn659m6c

[@thealphasierra9471]

Now I know what's the name of this.

[@zun.1358]

Wind turbin ventulator

[@ThatsHimThere]

Legends 👍🏻👍🏻👍🏻👍🏻👍🏻

[@himanshupatil3298]

जळगांव मध्ये कोणी आहे Roy's Sheds Suppliers please contact me

[@JOELwindows7]

Learned: Tek = Screw = Sekrup *T E K*

[@Jesus_Brother]

Pronounced Tak

[@PracticalPrimate]

@@Jesus_Brother nah tek in Australia. They are self tapping screws.

[@finfan1009]

Silicone is not the right sealant for metal.😢

[@DBLEVE]

So criticism but give no solution. Just like a liberal

[@julianosilva3599J]

JJJJJJJJ a sua minha casa uma

[@louiswhite1445]

You haven't answered a single question.......