Installing an Incra Clean Sweep on an Incra Router Table

[@michaelgrosso634]

Thanks for taking the time to create this video.

[@1031Investing]

This is an identical repeat of what I am going thru this week!

[@bzntch323]

Thanks for posting this, it answered some questions I had. I hope you don’t mind a bit of constructive advice. It would be great to include some close ups on assembly steps. Also maybe cut out the down time showing you trying to figure out directions. Spend the time at the editing side of your videos! Again, not trying to be a jerk or anything, but that might increase the traffic to your site! Thank you again for posting.

[@robertoramirez790]

Brian thanks for the video. Ignore the "cranky pants" cuz obviously they are watching these videos instead of making them. I really appreciate the time and effort folks like you put into these videos to try to help the rest of us out! For the complainers and critics....don't like a video, move on. Video too long for you, fast forward. These guys don't HAVE to put themselves out there. They do it so shmo's like me and you have a resource from which we can learn from their experience which then makes it easier on the rest of us. A "Thank You" is way more appropriate than leaving an ungrateful comment.

[@hotpuppy72]

Armchair engineers abound on KZbin. They are sort of like stray dogs. They want to come into your space, take a crap, piss on your house and then bark at you before running away. Best thing to do is to ignore them or spray them with the water hose.

[@harleywood9588]

I think you need some cheese to go with all that whining

[@donbarningham6431]

OMG! Did you even think before you turned your camera on? If you were to ever look at a woodworking instructional video, you would have understood that the prep work, and the pre-prep work are sooooo important. Do your “figuring out” before you take the video. This is SO PAINFUL TO WATCH. I’m so sure that everything you can’t seem to do is a “design Flaw”. I received mine today and wanted to see a KZbin video on how to put it together....your one of the few who has a video on this. Bummer. Congrats on trying to film it. I cannot do video. And as I am t ryin to be positive, I won’t say any more. Thanks for your video.

[@hotpuppy72]

Intead of complaining, why don't you approach this as the opportunity to sit in the corner of my shop while I put this together. That is the perspective I'm aiming for on my longer videos. Kudos to you for watching through 27 minutes though. I'm pretty sure the whole thing took longer than 33 minutes, there are multiple cuts in that video. The aspect I called out as a design flaw is requiring you to put a screw head on the outside where there is no clearance to put a screwdriver. Even reversing the screw to the inside it was difficult to manage. There is a table rail in the way. Moving that screw down 2 or 3 inches would have solved the clearance issue. If I had to guess, the person who designed the Clean Sweep never had to install it on Incra's router table. If it were up to me, I'd eliminate all the lock washers and regular nuts and use lock nuts. They don't vibrate loose and don't cost that much more.

[@hotpuppy72]

You may also want to skip the Incra Fence video on the table saw. It's also really long. And as most of the crankypants® point out I'm barefoot in my garage. GASP. lol.

[@michael1234755]

you got there in the end loved your i dont give a shit attatude i was killing nyself laughing