Installing an MMX 80mm Ported & Polished Throttle Body & Vortice spacer for V6 Pentastar

Рет қаралды 22,893

Күн бұрын

Пікірлер: 59

@Tiki71 3 жыл бұрын

Links 👇🏼 Volant Vortice Spacer: amzn.to/3HiP9uJ MMX 80mm Ported & Polshed TB for Pentastar 3.6: www.modernmusclextreme.com/p-... Cheaper (NON-polished) Version: www.modernmusclextreme.com/p-... Magnetic Pickup Tool (A MUST HAVE): amzn.to/3IUF7Al Fender Protectors: amzn.to/341xPfa Husky Trunk Liner for Dodge Challengers: amzn.to/3FJllWn K&N 63 Series Cold Air Intake: amzn.to/3qJIiV4 My Dodge Challenger Playlist: kzbin.info/aero/PLH... Other Mods, Upgrades, & tools for the Challenger (Videos coming soon): Mishimoto Oil Catch Can: amzn.to/3rBjPjR A smaller Catch Can: amzn.to/33tTigG Hose separator clamps: amzn.to/3KnafKl ½” “Universal” Catch Can Hose (4’): amzn.to/3fIdzBo MGP Caliper Covers: amzn.to/33hT1NE Dodge Challenger LOGO Puddle Lights: amzn.to/3nDcNtJ Carbon Fiber/Chrome tip valve stem covers: amzn.to/3zUnfCi Challenger Rock Guard/Mud flaps: amzn.to/3tInbEo Instrument Knob Rings: amzn.to/3o2210B Dodge Challenger Floor Mats: amzn.to/3FKEiI0 Challenger cup holder and pocket inserts: amzn.to/3rBNucM Pedal Commander: amzn.to/3IkoQUN Side Marker Tint: amzn.to/3nBPXTx 22MM Lug Nut Socket: amzn.to/3rigx5a 3/8” Air Ratchet: amzn.to/3K3qOuB 2 Ton Jack and 2 stand set: amzn.to/3K8VLxg Auto Trim Removal Tools: amzn.to/3nG2gOI “Quiet” Air Compressor: amzn.to/3tqObYT My Palm Tree Hat: amzn.to/34bcfo7 Palm Tree License Plate: amzn.to/32widPU 🍹 We have a recommended product page on Amazon & it’s filled with the things we use and like & it’s a convenient way to check out what you see on our channel & it adds ABSOLUTELY no cost to your purchase: www.amazon.com/shop/tiki71 If you click through and buy something, we receive a small a very small commission (as little as 1%) that costs you NOTHING extra, but it helps us with the costs of delivering content, so Mahalo (thank you)! 🤟🏼 🌴 Subscribe: kzbin.info 🌺Join our Facebook Page: facebook.com/thetiki71 🥥Instagram: Instagram.com/TheTiki71 🗿 Twitter: twitter.com/thetiki71 🦜 Email: tiki71@yahoo.com 📭 Send letters, pics, and stuff (I might open it on camera and give you a shoutout}: Tiki71 c/o Jungle Jerry 205 Wilburn Heights Central City, AR 72941 🥂 Buy us a tiki drink: www.paypal.com/paypalme/tiki71 🌴 🍷 Okule Maluna! (Bottom’s UP)🥂 🌴 #Dodge #Challenger #MMX #Throttle #volant #Mods

@miguelangelquezada944 3 жыл бұрын

You used the same coupler ? Or did you had to get a different one ?

@Tiki71 3 жыл бұрын

@@miguelangelquezada944 I was able to use the same silicone coupler that K&N provided with their air intake kit.

@justinhughes6840 5 ай бұрын

Were almost twins this was a great video. Not too much and jest enough description and details. Earned a follow today

@bigrr64 Жыл бұрын

Good video, I'm a bolt dropper. Those magnetic sticks come in very handy.

@SauceMan48 2 жыл бұрын

Turn the tea pot off homie.

@rauladame2105 8 ай бұрын

I got 3 of "these", definitely worth the investment.

@mattcavalier5879 Ай бұрын

excellent work, are cat-backs in your future for this Challenger and is it rwd or awd, I have been looking at the awd for up here in the northeast to be my daily, I have had three 5.7s, an 09 Charger R/T, 13 Charger Daytona, 15 Challenger Shaker, and 22 Challenger 6.4 Scat Pack Widebody that got stolen, and now a 19 3.6 Durango that needs a little more power too.

@jmkos86 2 жыл бұрын

Will definitely be doing this next. I got 5.7 on my 2019 sxt challenger with just the mopar cai. I deleted my resonator but don’t think that had anything to do with it. The conditions when you do the 0-60s have a lot to do with it as well. But thanks for the video!

@lonelybikr 8 ай бұрын

If the spacer fits in the intake housing, what is the inside diameter of the spacer? It looks to me like you're defeating the larger bore of the throttle body.

@cod_prod-6186 3 жыл бұрын

Nicely done 😎

@kiddprofit2500 2 жыл бұрын

Following this step by step

@Tiki71 2 жыл бұрын

👍

@johnboy5235 2 жыл бұрын

Love the Mod

@MonBrokeAf 6 ай бұрын

so do i need the adapter or just purchase the 80mm throttle body ?

@JasonBlundell-tk2pj Жыл бұрын

Did you notice an increase or decrease in fuel mileage as well as power. I’m new to the 3.6. Thank You

@Tiki71 Жыл бұрын

Got a bump in both.

@JasonBlundell-tk2pj Жыл бұрын

Thank You for the fast response!

@justingrant3648 6 ай бұрын

How’s it still keeping up

@JameyCampbell_54 2 ай бұрын

What throttle body kit is this? And did you have to use an adapter or did the throttle body bolt right onto the intake manifold ?

@crazyscooby Жыл бұрын

Great video. I watched it a few times before doing it myself. I have read many reviews on the spacer and there are many haters of it. Have you had issues where it goes into limp mode? Thx

@DavidSims-Music Жыл бұрын

I just installed a spacer on my 18 SXT. It ran fine for my first drive but I went back out several hours later and the car went into limp mode. I suspect a vacuum issue. There weren't any directions for the install so I winged it, the gaskets didn't line up very good. I plan on digging into the issue tomorrow. The only "fix" I had was to plug my scanner in and clear, there weren't any codes but it did reset until I tried to do a hard pull.

@Newbreed6256 2 жыл бұрын

Great Video

@Tiki71 2 жыл бұрын

Thanks much!

@yellowjoe.2000 2 жыл бұрын

helpful video. thanks. Does the 80mm throttle body really help with HP power gains on the v6 pentastar?

@richardruffin6175 Жыл бұрын

I have one and without supporting mods to go with it there isn’t a huge difference other than low end sound in my opinion, but I ordered the spacer he got and I’m going to see if I have a difference

@uniquecrystal1456 10 ай бұрын

@@richardruffin6175how did it go ?

@luckstersants6362 5 ай бұрын

@@richardruffin6175yo was there a difference

@ilikepancakes1177 Жыл бұрын

wanted to do this but wondered if the hole in manifold was big enough to put bigger throttle body

@RareAirTwo4 Жыл бұрын

I'm having problems passing emissions on my 2015 Challenger v6. Problems with oxygen sensor monitors not being ready. Any suggestions?

@davem.539 Жыл бұрын

I would have doubts that replacing the stock throttle body to a larger will make any HP, without some extra fuel .

@kaptinzero1869 2 жыл бұрын

Not gonna lie I was laughing once you dropped that bolt down in the engine bay (We've all been there) until I seen you had one of those magnets now I'm commenting askin where you got that from??

@Tiki71 2 жыл бұрын

Amazon. I think I have link below the video.

@SauceMan48 2 жыл бұрын

I have 3 different types of magnets in my toolbag. Been a mechanic for 23 yrs. Magnets are a life saver.

@auto1234 5 ай бұрын

Did he say dadgum

@mcm95403 10 ай бұрын

That's an air temp sensor, not a mass air flow sensor.

@austinfernandez2117 9 ай бұрын

Did you have any tuning done when putting this throttle body ?? All I have is an intake and exhaust done

@mcm95403 10 ай бұрын

Did you do the throttle relearn?

@CallMeJeff Жыл бұрын

hi sir so all i need is the throttle body no extra parts or anything i can used my old screws

@K1_OTP 6 ай бұрын

Where can I purchase this throttle body?

@chriskrilly9021 Жыл бұрын

So you didn't need the new adapter for the 80mm??

@strawbs2279 Жыл бұрын

Im looking to buy this, is there an adapter needed?

@richardruffin6175 Жыл бұрын

You don’t need any adapter

@SdubWilliams Жыл бұрын

The link for the ported and polished throttle body no longer works. Do you have another link or possibly a part number? Thanks

@Tiki71 Жыл бұрын

I got it from modern muscle extreme.

@o.moonface.o Жыл бұрын

What’s the cuppler size

@oralemorales1721 2 жыл бұрын

You didn't have to get a bigger sleeve from throttlebody to your k&n tube?

@Tiki71 2 жыл бұрын

No, I got it on.

@strawbs2279 Ай бұрын

I know this video is old but if anyone could tell me if I need to get my car tuned for this that would be great. I don’t want to have it run lean and break my engine.