Installing and using CCS v10 with the MSP432 Launchpad

[@juniortec81]

Thanks Greg. Your students are lucky to have you!

[@timmorgan3673]

Thanks for that Greg - A nice intro :)

[@marytwo-shields9119]

Best Senior lecturer ever.

[@NayanaRadadiya-qz3rg]

Thank you sir for making this video. I want proteus simulation video for this controller.

[@sarriewanderer]

Thanks for sharing your knowledge sir... Keep it up.. New friend here 😊

[@naasikhendricks1501]

Hi Greg I am not sure if there is main.c initialization of the peripherals and the neccessary user define codes sections?

[@owssam8311]

Tank you so much. Very helpful

[@faewen3092]

thank you so much. Could you please upload more videos on CCS?!

[@joerit633]

Thank you Greg!!! This helped me very much!!!

[@jonariessner6210]

Thank you. You helped me a lot!

[@abhishekjaan6150]

best video for beginners.

[@mayureshkulkarni4791]

" MSP430: Error initializing emulator: No USB FET was found " im getting this error constantly while im trying to debug. my board is connected to the computer and it is showing in device manager still im getting this error. Any solution??

[@gregturner4426]

With CCS closed, start Device Manager. Then plug in the board and view Ports under Device Manager. The board should show up as two different XDS110 COM ports if everything is okay. I have seen this when the cable is not completely plug in at the board. Make sure that you have the cable seated very securely at the board. If all this fails, repeat it all with a different cable

[@anirudhpraveen7410]

"Unable to open USB device" this pops up when I click autodetect

[@gregturner602]

With CCS closed, start Device Manager. Then plug in the board and view Ports under Device Manager. The board should show up as two different XDS110 COM ports if everything is okay. Make sure that you have the cable seated very securely at the board.