Installing Bar End Mirrors and Review

Installing Bar end mirrors and review on the Kawasaki Z900.
www.amazon.com...

[@tamakoura8736]

Love how you got straight into it. Well done.

[@SimpleSimon]

Thanks for watching.

[@user-up7yn2kn6u]

@@SimpleSimondo you know any mirrors for pit bikes? Because I have a dirt bike but it’s not an enduro or anything but looking for mirrors to put on it so I don’t need to turn around

[@ninjarider7]

Thanks for the tip on the grommets! I ended up getting mine from Lowe’s. Hope to catch you on a ride one of these days here in Tallahassee.

[@michaelanderson3813]

5 years later..thx man...

[@SimpleSimon]

Thanks for watching!!

[@eddyray666]

Thanks for the content! For anyone reading along, I got mine off Ali Express. Everything but the paint was great. That was shit, but if you are willing to sand and respray they are easily worth the 12USD!

[@jonmayhewanderson3907]

Link please? Thanks

[@SimpleSimon]

Thanks for watching.

[@mattrockman1028]

im sold. thanks for the really great review

[@SimpleSimon]

Great, I am glad you like it.

[@rogersmith5371]

Generallly the design and placementof things like mirrors is such that you can check them without taking your eyes of the road. The bar end ones might give the bike a cleaner finish but despite what you're saying I suspect they are not as good as the originals. For one point they look smaller and of course that affects your field of vision. One a personal note I don't lke them being on the end of the bar it just means the hands are more cramped. All that said I guess it is a matter of personal taste. Enjoy the ride and be safe.

[@zypherus6876]

Those are all valid concerns, but I believe that these help fix a major problem with thestock mirrors where the majority of the mirrors vissiom was obscured by your elbows. Here they offer a much better rear view

[@TheDiesel1905]

I might be the only one on the internet who actually likes the classical mirror positions , I do not like to look down for the mirror to see what I got behind me , simply not ideal.. I prefer to replace stock mirror with something decent which will not show my arms yet still will be fitted into factory style.

[@SimpleSimon]

Thanks for watching.

[@chucktowntech]

I just bought a 2019 z900. It has a security bolt in the bar end. Just letting everyone know.

[@SimpleSimon]

Thank you for the update.

[@draleyjr]

do you need a special tool to remove the security bolt?I just ordered a set of these mirrors.

[@MunsKi]

what is that security bolt?

[@Jodyrides]

I just clicked on your Amazon, where to buy these mirrors tab. It is April, 2021, the price on Amazon is $47.99 for these mzs mirrors.. I went on eBay, and they are $22.99 free shipping. Same brand, MZS.. I have yet to find anything cheaper on Amazon on any product. thanks for the review of these mirrors that I did not know existed before. All I know is, the stock mirrors on my Z 400 just give me a limited view of my elbows. about Loctite. I have been using Elmers wood glue instead of Loctite since the late 1970s, On all my dirt bikes, trials bikes, street bikes. I tend to lose those little Loctite tubes, but the Elmers glue bottle is large enough that I don’t lose it

[@SimpleSimon]

I never tried Elmers glue. Thanks for watching.

[@CornellKeith]

I like them as well. I just wonder how they are going to work on a supersport with having to move your head to see the mirrors vs just your eyes.

[@8OneOfTheNobodies8]

Link to the rubber plugs for the mirrors?

[@Darkandcrimson]

Yo where is this place you're riding thru? Scenary is amazing

[@SimpleSimon]

Tallahassee Florida, Thanks for watching.

[@MattBrandon]

It doesn't look like there is enough bolt to go back into the bar and cure it. Did you change the bolt out for a slightly longer one?

[@owenknip2515]

There is. But not that much

[@feardafish]

Awesome video! Your bike sounds awesome! Is that the stock exhaust?

[@SimpleSimon]

No its a Lextek. Thanks for watching.

[@nakl7810]

@@SimpleSimon Love the sound! Is that a slip on or full exhaust? Can you please send the link to order one thanks.

[@hellraiserrec19]

Is the bar end screw a m8? Asking because I have Rhino Moto bar ends and wanted to make sure they fit. Thanks!

[@deathcore420]

Kindof agree about dorky looking originals. Bet can't tell that these look better tho. Makes the handlebar look too wide imo.

[@ukk2]

I have the same mirrors and cant figure out how to install them on my z650 with the bar ends that they came with. Did you use different bar ends??

[@owenknip2515]

Maybe a little late but no. You should put your same bar end back. It takes a while (took me 3 hours) but it will work. Its diffucult to mange with the gas

[@xpersix9222]

great video brother : ) i got a z650 brought just before bloody lockdown here in uk lol , got mine off amazon to, they was pretty cheap and must admit they are great for price but be warned everyone they can be a bitch to get the Kawasaki bar ends off : ( got mine under and yes Simon it takes some getting use to , but after watching your video think I'm going to put them over

[@stephansimon5648]

You should do gaming videos!

[@rcmoto7133]

Very Nice 👍

[@vincentpupich9211]

great video helped alot

[@SimpleSimon]

Awesome, Thanks for watching.

[@hornetdc]

I saw the same mirrors for about 10$ on aliexpress.

[@SimpleSimon]

Cant beat that.

[@gijspannekoek1131]

Will these fit an z650?

[@ginobulo]

You know diameter of the bar ends? 22 mm?

[@informedwolf9124]

I can't belive this did not add vibrations on your handlebars or in the mirror themselves. I have not seen any bar end mirror that would not do that

[@SimpleSimon]

No vibrations or numbness in the hands that I notice. Thanks for watching.

[@p.santos6644]

👍

[@garyk8285]

Good idea... Wonder if they fit on a VTR250... Is there any different in the vibration though?

[@SimpleSimon]

Slight vibration in mirrors at high revs and high speed.

[@fallinginthed33p]

On big singles, how do you reduce vibrations for bar end mirrors?

[@SimpleSimon]

Maybe try heavier bar ends with the mirror. Thanks for watching

[@barrybcox1]

Anyone know or have a video on how to fit bar end mirrors on my 2019 Kawasaki W800 cafe and what it entails as it doesn't have bar end protectors like the sport bikes etc

[@SimpleSimon]

If your bars have a hole in the end then any universal kit should work.

[@JPTulo]

Why would you use red Loc-Tite on those? Typically you need a torch or a heat gun to get anything with red Loc-Tite off, which will totally melt your grips. Medium strength Blue or even Orange should be more than enough.

[@SimpleSimon]

Great comment thanks for watching. I started using orange. Holds like red and breaks free like blue.

[@JPTulo]

@@SimpleSimon I’m curious, have you had to remove the fasteners with the red stuff? I’ve only had a couple experiences with red loc-tite, and they were absolute nightmares. That’s why I try to warn when possible, sorry if it came off harsh. Thanks for the great content.

[@SimpleSimon]

@@JPTulo No worries, I appreciate the info.

[@Klimowicznicholas]

Would these work on a 2019 z400?

[@SimpleSimon]

I dont see why not, you would have to look at your bar ends

[@blipco5]

Get that 'stang.

[@MayoBO9]

how did they hold up

[@SimpleSimon]

They held up great for 2 years a little rust not bad but I did change to a different kind that I do like better. kzbin.info/www/bejne/iHTUZqtqrbWbZrs

[@MayoBO9]

@@SimpleSimon okay cool i just got these so thanks for the update

[@ibrahimsyouf8461]

My arms are always blocking my mirrors! Do you guys know of any that will fit an 04 F4i?

[@ibrahimsyouf8461]

Preferably small circle ones

[@owenknip2515]

Adjust them! I have a z800 and dont have the problem

[@ashish_z9]

Which windscreen is that?

[@SimpleSimon]

Not sure it came with the Bike, I think it was from amazon tho.

[@justin.uwood25]

Genuine Kawasaki Accessories Wind Deflector (Smoke) for 17-19 Kawasaki ZR900ABS www.amazon.com/dp/B0731KDF72/ref=cm_sw_r_cp_api_i_URmMFbDQ4ZQB4

[@PlasticTonkaToy]

Did you not use the included adapter that comes with the kit?

[@SimpleSimon]

I wanted to use the stock bar ends, which worked great.

[@PlasticTonkaToy]

@@SimpleSimon Thanks. I actually just finished installing these following the instructions of this video, but I have an issue on the throttle side. I keep getting the throttle stick when I go to tighten the stock bar end down. No matter how much tweaking I do between tightening the clamp or the bar end, it gets stuck. Right now I have it loose enough where the throttle doesn't stick completely, however, I can spin the bar end. It doesn't seem safe. Any tips?

[@SimpleSimon]

@@PlasticTonkaToy You could put a washer between the bar end and the bar, or trim the throttle tube back.

[@PlasticTonkaToy]

@@SimpleSimon I'll give it a go and report back!

[@draleyjr]

adding a washer work?

[@Crafted1231]

hit way to many car mirrors while filtering through traffic with bar ends, they look better no doubt but jesus christ made it alot harder to filter through

[@SimpleSimon]

Lane filtering is not legal in Florida, yes it makes the bike a lot wider. Thanks for watching.

[@marc-andrepetrin3314]

why dont you just install the mirrors right on the bar end weights?

[@SimpleSimon]

The Clamps are to small to fit around the bar ends.

[@rebel4446]

You're gonna break them if you do knee drag on that bike.

[@SimpleSimon]

Not that good yet, but they are easy to remove if I was. Thanks for watching

[@broderp]

Totally subjective. Those cheap mirrors look like crap on the Z900. I dont have any issue with the OEM mirrors, I do not see my arms in mine because I adjusted my mirrors properly.

[@SimpleSimon]

Thanks for watching, don't forget to subscribe.

[@JPTulo]

@@SimpleSimon😆

[@Pettington]

Stop installing all of this cheap shit on to your bikes. Buy some proper gear and pay for the quality