Installing Brocks Performance Cams on a 2022 Suzuki Hayabusa - Dyno Results

[@terryplymouth2528]

Thank you so much Chris! I really enjoyed hanging out with you and Kountry, you both were super cool. One thing I didn’t think to tell you is those bikes haven’t been ridden since September and the gas in the tanks is about 5 months old. They may have done a little better with fresh gas. I may want to bring them back to get ceramic transmission bearings installed in both bikes. I think the ceramic transmission bearings would definitely wake the 1000 up.

[@rickmills1084]

what he said. LOL

[@robertcarr1571]

😂 Yo Terry don't forget where you come from shw love to the ( 757 )

[@terryplymouth2528]

Always! Still and always will have love for the 757 even though I now reside in the 804.

[@TenRing69]

I just picked up my 25th Anniversary Busa today. What a joy to ride. Its comfortable & smooth. The quick shifter is 10 times better than my 13 S1000rr was. More nimble than my 08 Busa was too.

[@spacecityryder]

I really like that red/orange color 👍

[@CrySomeMorePlease]

The 08 I had felt way more powerful than the gen 3’s. Hell my 06 felt stronger

[@tysoncott7402]

I’m with this fella, im knocking on 50yrs old, iove the litre bikes but after 35-45min i need a break & my gal pal rides with me most time and modern litre bikes suck for that too, these days i have a 22 ZX-14R, a 23 Hayabusa, and a little CBR650R for easy going cruising

[@bigirb2002]

installed mine and got a flash from you. she a monster.

[@TeamMooreMafia]

Let your friends know about us!!

[@terryplymouth2528]

I had the opportunity to take the bike out yesterday and made about 7 or 8 pulls from around 30 to 170mph. Bike is obviously ramping up to speed a lot faster! The main thing I noticed is I was running past redline into the 11.5 area and not hitting the rev limiter until around 11.7 or 11.8. The cams are definitely well worth the money.

[@TeamMooreMafia]

💪💪

[@Konchs1]

would be a really good video on how to set up the suspension for those bikes for roll/drag racing but nonetheless another banger from the legend MOOREMAIFA

[@TeamMooreMafia]

Noted!

[@charlesnorthrup545]

For me, it would be the Hayabusa all day every day

[@exoticcreature3059]

Normally I would agree were it not for the fact that the Kawasaki Ninja Zx14 has the largest displacement engine on offering of any Supersport bike with an inline 4. Really, if everyone loves and fears liter bikes then how will they react to a 1,441 cc engine in a bike? Conjecture.

[@GH0STMANE995]

@DMONEYlNDUSTRYit’s not that heavy,depends on rider preference it still leans real easy and at any speed ifs stable

[@clutchitup8565]

It makes the bike easier to ride and more stable at high speeds ​@DMONEYlNDUSTRY

[@nathanrookard2977]

Busa all the way I’ve got two and a bking and love them even with having two gsxr 750s I still love my busas

[@knightonwarbeck1969]

Chris, I think you need to point out the TORQUE difference over a liter bike. HP is matched around 190 but the Busa has 30% MORE TORQUE- 110 vs 85. Factor in this 30% increase in torque with the 190 HP holding an additional 1500 rpm and this Busa should be an absolute screamer of a rocket. If only we can get video of a roll on race (before and after cams) against a liter bike. Once again, please add in a 30 second clip of the customer reaction, post tune ride. Thanks Chris for the content.

[@alberto3874]

good torque busas, but they weight 100 lbs more than a 1000 bikes ... its a huge diferente in acceleration ...

[@tbrowning9643]

Another great video, those cams definitely wake up the busa. Putting up ZX14 numbers now.

[@turboboy0]

not really. he has a video of a zx14 with filter and exhaust and his tune doing 200hp on pump gas and then 207hp with race gas.

[@tbrowning9643]

@@turboboy0 I meant a stock one, I know they make 200 with simple bolt ones and tune. I own one 👍🏻

[@jockojockoson9995]

Nowhere near😊

[@provenpowercycles]

Good video ! We have a few wanting to do this setup. Good to see they are pulling up at higher rpms now. That drop in power is brutal on the oem setup. 👍

[@danielresch8071]

I asked you to do a thing on cams many years ago you never did you finally got smart cams is the cheapest way for more power😂😂😂😂❤

[@boogabowchickadee400]

i live my passion for bikes with rims racing and ride on the edge 3 video games and with moore mafia's videos ❤

[@robertcarr1571]

Yo Terry dont ever forget where you from the local Boys have always been there for you (757) 💯

[@TheLoneWolf_andCoyote]

I'd like to see that Busa with those cams and a Brett Barber cnc ported cylinder head and throttle bodies. I'm sure that will definitely wake it up.

[@dudebud72]

I’m buying mine tomorrow. I can’t wait. It will be my 3rd, last being an 08, my first 04.

[@CrySomeMorePlease]

I had 06 and 08 before the 3rd gen… 3rd gen feels so weak compared

[@cday6160]

She’s a beast for sure.

[@djwilliams9842]

Cant go wrong having both of them. I think i have the Gixxer set up for the track, and the busa just to ride around as a show bike. 😎

[@javierpicon2412]

Mr Cris always the master of the Best

[@davidgill5336]

Busa all the way!!!

[@BenjySparky]

Moore Mafia, y'all rock! Peace

[@David07R1]

Keep the videos coming Chris!!! Love that the dyno videos are back!!!!!

[@Raylep1]

I love that exaust.. I wonder what it sounds like with pops and bangs

[@busabros2480]

said no one ever

[@barthutchison4207]

Kind of off topic but has your shop had any complaints about the new gsxs1000 engine knock on warm start up that lasts about 15 seconds. Years prior didn't do this nor did the k5 gsxr.

[@slowschoolofdriving218]

So your telling me a stock bmw s1000 with a tune makes the same power? Damn I’m impressed

[@needmetal3221]

Do the cams need to be degreed in or just line the marks up?

[@TeamMooreMafia]

Just line up the marks

[@nookied3735]

I'm asking because I dont know, but Brock's website shows dyno numbers for these cams putting out 210 hp and 120 ft. Lbs. of torque in a busa. Why is there such a huge power difference between their busa and this one? I'd invest in these cams for 210 hp and 120 lbs. of torque, but not for 190 hp.

[@gaddy8964]

Brock's website was showing the use of race gas for the extra gains that's shown.

[@SHSPVR]

Thanks but what cam did you get as you said you were going to tell us in the next video ?.

[@FairIsReal777]

Will these cams fit Gen 2 Busa engines?? Heard if you use 2 intakes cams it’s better performance? Any facts to this sir

[@powamoto]

Ok Busa Time 🎉❤

[@h82bbad1]

Busa. Can't beat the comfort on a long ride.

[@Thebusaman]

Awesome video!

[@TeamMooreMafia]

Thanks!

[@Timfit4u.123]

Hey Chris, I have 2011 600 gxsr, and wanted to know if you'll do my ecu flash. Will it trip on the engine light or anything like that? I just do want to have to take it to the shop and have someone else work on something that I did to my 🏍.

[@SkylarGreer-l2k]

caught you in time on my lunch break

[@teamgonzo9289]

Are the 'cams' re-grinde??? Or are they a Pacifically ground Camshafts???? Can you degree the cams for 'overlap'???

[@onealbarnes596]

Busa all day. Gixer mabe the weekend.

[@mmahdim5912]

GSX-R 👑👑👑

[@jockojockoson9995]

Not convinced with these to be honest. My tuned 23 makes 187hp with a full Akrapovic system and DNA filter. No way is this worth doing for 3hp.

[@r0hx227]

Just ordered these cams today need to get reflashed the guy i bought the bike from had a moore mafia tune originally.

[@Drunken_Hamster]

Hell, you could probably run it out to 12 or 12.5 with how that line looks.

[@ecc5119]

This is a diminishing returns if the cam is too big for the port flow.

[@TeamMooreMafia]

Where did you get your info?

[@RobertBulpitt-qq5bk]

I would had yoshimura high lift cams can not go wrong with yoshimura those busa engine's bullet proof

[@Wolverine249]

Riding that suz 1k is my choice

[@Indecline099]

Thinking about getting this for my busa. Anybody have a rough idea of what labor would be to have these installed

[@dsvehaynes6043]

300-350 at the dealership

[@GLP3]

Where can I order the htp stacks?

[@TeamMooreMafia]

Call us at the shop. 864-244-5447 ask for Shane.

[@douglasgrosch228]

can you put ZX14 cam on concours 14-- web cams got ground cams for concours 14-- be great 20-30 hp on concours 14 with VVT! new

[@rickmills1084]

i know that fella!!!

[@x1boomer]

any specs for these cams, cam card available?

[@g13thware]

Chris can you put Cams on Ducati’s

[@TeamMooreMafia]

We do not work with Ducati. Sorry

[@sharkpuppetsbrother6664]

Forgive me for sounding stupid, but I thought the Hayabusa comes with 190 hp?

[@americanbassin2648]

anyone know of any good shops in the phoenix area to get these cams installed and just to have a good shop on hand???

[@soNso2]

Now a good head & that about all i need.

[@stevenallen4123]

Wya. How can I get my kx450 on the dyno

[@danielresch8071]

How much does it cost

[@RyanSeavey-q7m]

My black bird 250 on nos

[@HardlyaDavidson]

Do a Sportster S 😉

[@Tech-ot4iy]

California should be subsidizing other states owners to drop in new cams, ridiculous.

[@R6GREG]

🔥🔥🔥

[@vincesimard]

Why does a gsxr 1000 make 194hp and a 1300cc speed machine make "only" 190hp?

[@vincesimard]

@@exothermal.sprocket because the engine in the hayabusa is bigger. Bigger stroke = more leverage = more torque. I was just wondering why the busa couldn't rev higher with the new cams and velocity stacks. I was expecting at least 200whp but i clearly don't know much about busa's.

[@wudntulike2no32]

One makes 190hp at 10k rpm and the other makes 195hp at 13k rpm.

[@vincesimard]

@@wudntulike2no32 and in 2001, a gsxr made 160 @ 10800 rpm while a busa made 175 @ 9800 rpm. I thought the whole point of the busa was to be faster😅

[@wudntulike2no32]

@@vincesimard busa was made for top speed, not acceleration and it achieved that with multiple land speed records.

[@RammaJamma3]

Hey Chris, on ninja 400RR besides ECU flash and slip on muffler what else could we get to step the bike up to 90H.P!

[@lewisallen3379]

CM$ 🤙🏾🙏🏾✌🏾

[@inteligentvtec]

These are literally oem Suzuki gen 2 hayabusa cams.

[@austinphelps444]

Promo'SM 👌

[@Dan_Bell007]

Busa’s power for a 1300 CC bike, to me is disappointing. I feel they should be well over the 200 hp range. Especially a new model Busa. M1000, Zx10’s and the Ducati’s are all in they 200 HP range. To each of his own!

[@michaelhudson303]

Torque gets the bike moving,the Busa has a lot more than the bikes you named

[@postmortemspasm]

190hp? ZX14r with exhaust have been making 205 since 2012. Thats pretty sad. Oh how the mighty have fallen

[@joshuadavis7592]

😂😂😂 that extra 15hp you're talking about means nothing if you can't ride😂😂 that 190 will go to work on that 205 😂😂😂 the TQ is impressive tho!

[@TeamMooreMafia]

You really have to ride them in person. Yes the HP on a zx14 is a lil' more, but the new Busa is a million times nicer to ride.

[@postmortemspasm]

@@TeamMooreMafia Oh I agree with that, definately. I bet the bike is epic to ride

[@postmortemspasm]

@@joshuadavis7592 okay... what if you can ride?

[@joshuadavis7592]

@@postmortemspasm That would be a problem in a drag race between the two lol. I know what a few Super Stock riders went on the Hayabusa and the ZX14R. I just think it would be interesting to see the battle? In Super Stock, how fast do you think the Busa can go under the class rules with the addition of the cams? 🤔 As it stands, the ZX14R is hard to beat in that class. Don't think I'm bashing the ZX14R lol

[@MitEclipse91]

So he spent thousands of dollars for 5hp? Doesn’t seem worth it but hey it ain’t my money.

[@JezeloGames]

supposed to spend 10k for the ultra tb kit

[@GidDree]

I want a Busa.....will trade my Harley.....PLEASE stop laughing...ty

[@shawnlisbon]

Yes yes yes!!! Lol

[@marcusripley3677]

1000

[@saringaclose]

BUSA GREAT BIKE BUT TO HEAVY WILL NEVER OUTRUN A H2R

[@MrPeteRR299]

Suzuki messed up with this 3rd generation, too poor in terms of engine

[@Scott_Buchanan]

I don’t like Busa’s but I’m here to see you work your magic 🪄

[@joeljohnson3676]

ZX14 R all day!