Installing CPP Remote Master Cylinder Cap Kit

In the video, Jason Scudellari walks through the process of installing CPP's Remote Master Cylinder Cap Kit.
Products used in this video:
Remote Reservoir Cap Kit: RRCK
Remote Reservoir Options: BBR, RR2
Shop for CPP parts here: www.classicperform.com/
Call us at: (866)-882-4131
Email us at: [e-mail]
More features, product reviews and tech tips here: teamcpp.com/
Timestamps:
00:00 Intro
00:10 Why Choose Remote?
00:26 Install

[@fawkyooo7377]

Okay so I bought his a few days ago and this is the problem I'm having with it. The clear hoses seem to keep air trapped in them, I cant tell if the air coming out at the calipers is from the air that's trapped in the remote mount lines or if it is a flair causing the issue because the air in the clear tubes doesn't seem to move. This video would have made more sense installing it on a truck and or showing real world install with how to fill and bleed the system.

[@CPPmaster]

Hi, sorry to hear you are having problems. You are welcome to give us a call at (714)-522-2000 and one of our tech guys can assist you

[@lylejohnston4125]

It looks like you're working on a '55-'59 Chevy truck. I'm installing a remote system from Johnny Law Motors. It only uses one hose and the fitting they give for the master cylinder lid had bolt threads. I had to use a pipe thread tap and a pipe fitting to prevent a leak. The master cylinder lid finish was so rough, I had to sand it. I'm going to glue the gasket on with contact cement because the lid is flat. It comes with a brass plug for the "extra" hole in the bottom of the new reservoir that I had to add a small o-ring to inside. Last thing, There is no air bleed hole in the new reservoir. What the hell? That should work just fine. NOT! I'm drilling a .020 hole in the side of the cap.

[@pedrofernando176]

👍🤙