How do I install Braided brake lines on my Motorcycle? Need motorcycle tires installed in Murphy, NC?
Пікірлер: 24
@jacobhendrickson89353 жыл бұрын
Show me a clean 07 R1 for 3500 I’ll buy it in a heartbeat.
@mjers72 ай бұрын
Extremely good explanation, thank you! Also, what are the clamps you used to secure the lines just slightly above the caliper? I have deflectors there and would rather have that for more organized routing. Thanks
@RideWNC2 ай бұрын
It is just a cable clamp. It will be in the Galfer package.
@mjers72 ай бұрын
@@RideWNC oh, Galfer didn’t send me any!
@RideWNC2 ай бұрын
@@mjers7 You can get them at every hardware store. They are very cheap. They are in the electical department.
@aftabkazi14 жыл бұрын
Awesome explanation..
@chadh67594 жыл бұрын
If you can find me another one of these for 4k with less then 15k miles I’ll buy it right now LOL
@jacobhendrickson89353 жыл бұрын
No doubt I’d love to find the prices he is talking. There pulling 6 here easy if there clean and low miles. Easy. I’ll buy any clean 04/06 or 07/08 for 3500/4000 all day long. Show me the way.
@chadh67593 жыл бұрын
@@jacobhendrickson8935 same lol
@Jeff-wl7zm4 жыл бұрын
Doing the rear next, hopefully? :)
@RideWNC4 жыл бұрын
You are in luck. I did this bike's rear last week. kzbin.info/www/bejne/oX2wZ5-dq6ibh7c
@420mrcowboy4 жыл бұрын
Where can I buy a vacuum pump like the one your using in the video.
@RideWNC4 жыл бұрын
@@420mrcowboy Harbor Freight or eBay. Make sure to get the MityVac brand. Much better than generic.
@420mrcowboy4 жыл бұрын
@@RideWNC thanks alot
@bullinapeamurica59403 жыл бұрын
Guessing I don't need to change the fluid when I'm only changing the lines so if I pinch off the resevoir hose will that prevent it from leaking? (Aside from the fluid coming out of the lines/caliper) Just raised my handlebars on a 06 r1 maybe 1 and a half inches and moved back a bit but the metal part connecting the two lower hoses is clipping the headlight housing because I had to finesse it a bit, I have trouble turning left almost dropped the bike a couple times just ordered steel braided lines so I'm gonna be tackling this project soon
@RideWNC3 жыл бұрын
You need to remove all of the fluid before you even start. Why leave old fluid in ther resevoir? Get a MityVac and pull all the fluid out of the system.
@bullinapeamurica59403 жыл бұрын
@@RideWNC it's not old fluid just got changed and is maybe 500-1000 miles old I will pick up a vac though for the future when I need to completely change it.
@RideWNC3 жыл бұрын
@@bullinapeamurica5940 You are not making any sense. You need to remove the fluid to remove the lines. Why leave 2 oz. of fluid in the system? You can't be that frugal? I want to think you are being lazy, but it is more work to try to keep the fluid in. But you are the master mechanic of your bike. Don't let anyone on the interwebs try to help you.
@7Shrek-Devils3 жыл бұрын
how to Rebuild rear brake master cylinder yamaha R1 2007 ?
@RideWNC3 жыл бұрын
That is actually really easy. The hardest thing is ordering the parts. Once you take it a part you will see there is nothing to it. OR - Buy a used one off of eBay. They are cheap.
@jacobhendrickson89353 жыл бұрын
I didn’t see no reason to remove my upper when installing mine.
@RideWNC3 жыл бұрын
I replaced the Steering stem bearings. You should try that.
@crazsmith4047 Жыл бұрын
Bruh people seeling a 007 for 7k
@RideWNC Жыл бұрын
Yeah... Unfortunately, people are paying it. More dollars than sense. When this video was done, these bikes were really cheap.