Installing Godspeed coilovers | 2012 - 2015 Civic Si

[@pbboeye1012]

LOL that rain was great at the end.

[@thatguyben3128]

Ride height looks great guys 💯👌🏼

[@YangLimitz]

Could be a lil lower but didnt want to take everything off to adjust height again

[@thatguyben3128]

@@YangLimitz lol, that’s why I just got lowering springs 😂

[@alvinvega4622]

So to lower the rear you have to mess with the spring ? I just tried to lower the strut and it barely lowered any

[@gavinlowder8352]

What did you torque the bolts too

[@angelpena2675]

video helped

[@jimmy111086]

How did you install the fronts? I noticed the upper strut bolt hole is slotted, did you push the rotor all the way in then tighten the bolts?

[@YangLimitz]

You have to wiggle the rotor around to get it alligned to the strut. Helps to have a hydraulic jack under the rotor to help push up to allign the strut holes to the hub

[@jaimejimenez2323]

Hey man i bought the same pair of coils, only problem is that the rear is really bouncy and i can’t seem to find the problem. If you know anything I would appreciate some feedback

[@YangLimitz]

kzbin.info/www/bejne/q6rYqqyoh7R8j7c That video does a better job at explaining than me. Check it out

[@pbboeye1012]

I'm guessing it isn't properly preloaded. Look through the vid and he actually writes some stuff on screen with directions for that.

[@nicholaslapine5782]

Did you ever find out the problem I have the Godspeeds on a 2019 civic and I’ll catch air on the smallest bumps just did a road trip and I’m so surprised nothing was damaged it was literally like really car racing catching air hitting my head over and over again

[@shuahyang5128]

From MN! Keep up the good content

[@vqzxck]

Was that camber all from adjusting feature on the coils? or do you have control arms

[@YangLimitz]

Camber all from the coils yes

[@MinhNguyen-qc1wj]

Planing on getting a used pair for my Si. How’s the ride quality?

[@YangLimitz]

Rides good imo, fully adjustable

[@jeremyg.j.1459]

Hey bro whats your review/opinion now since the video was made ?

[@YangLimitz]

They ride fine, no issues or complaints here

[@tylerb3023]

If I wanted to max out the rear I would spin both lock rings to the very top? When adjusting rear ride height do I preload it first then adjust lock rings or the opposite?

[@YangLimitz]

From what i remember yes if you want max drop then spin rings all the way to top, then spin the strut down accordingly till it meets the hub

[@eliezergutierrez2472]

Hey I was looking at these exact coilovers for my 08 Civic but I also saw the Rev9 Hyper Street ll coilovers. Which would you recommend?

[@YangLimitz]

Tbh I think they are both similar in they own ways. No right or wrong imo. Go with whats in your budget

[@Kaohteeko]

Rev9 is Godspeed project sister company. So technically their ver simular quality. However, Godspeed is clearly their more premium brand. Rev9 quality is Hit or Miss; with their biggest concern being shock durability. They offer one year warranty from authorized dealers only.

[@vincebucaro2634]

You should never have to mess with the preload....

[@DubBeats21]

How did it ride smooth or feel stiff ?

[@YangLimitz]

Feels dam near like stock imo, also can be adjusted for harshness

[@jaylaluz6276]

Bro! How I’m the world did you get the gasket on the bottom on the rear ? 😢

[@YangLimitz]

Gasket?

[@jaylaluz6276]

@@YangLimitz sorry i just found out the right terminology for it. I meant the insulators. Am I supposed to trim the oem insulators and use those or am I supposed to use the ones the come on the Godspeed springs

[@YangLimitz]

@@jaylaluz6276 I just used whatever godspeed provided me, for the rear it helps to have someone use they feet to push the hub down while you insert the whole spring/strut in

[@jaylaluz6276]

@@YangLimitz thanks bro. I can’t seem to get the insulator on the car so I think I might have the wrong parts.

[@6IXAlex]

How do u adjust rear stiffness?

[@YangLimitz]

There are knobs on the top of the strut through the trunk you can turn for stiffness

[@justinyang4169]

Super late! But did u need spring compressors?

[@YangLimitz]

Do not need spring compressors since this is a coilover install which replaces the oem stock setup

[@justinyang4169]

Thanks!

[@Eli_Eli_]

Any issues yet with the coilovers any clunks or weird noises like that

[@YangLimitz]

They ride just fine 10/10

[@HugoMata3]

Damn what exhaust is that?

[@YangLimitz]

Skunk2 76mm catback

[@ThePenguinGamer1]

What’s the exhaust setup?

[@YangLimitz]

Skunk2 downpipe paired with the 3" skunk2 catback

[@rickyramos7461]

Can someone plz tell me what’s the name of these wheels plz

[@YangLimitz]

I believe they are AodHan DS-01

[@nickfb6]

What’s the name of those rims

[@YangLimitz]

I believe they are the ESR SR09

[@Dirtywhiteboy118]

Is there a big difference between the 9th gen and 8th gen with this swap ? I’m thinking of buying mono as Coilovers for my 2009 Honda civic si can’t find a good video for 8th gen . But is it basically the same as yours ?

[@YangLimitz]

Tbh its pretty much the same thing, only difference is the 9th has those endlinks on the front while the 8th does not. My 8th is due for new coilovers soon too since mine are all shot.

[@Dirtywhiteboy118]

@@YangLimitz ohhhh ok I just watched a video ! The 8th gen the front sway bar links bolt to the sway bar and the lower control arm and the 9th gen front sway bar links bolt to the sway bar and to the side of the strut itsef . Other then that they look completely the same . Just ordered my set of monso ss for the 8th gen . I have a set on my 95 mustang cobra I road coarse in there a great brand and quality for the price . Both rides will be good ! Thanks for the video man great content !

[@YangLimitz]

If your doing autocrossing/track from what Im reading. Should step it up a notch to the monomax, thats what I have on my personal 8th for road courses. Sturdy and little to no body roll.

[@DiyFg2]

Put 50,000km on my 09 si and the driver side front strut starting leaking oil. Do yourself a favor and get the teins

[@YangLimitz]

Maybe you got a bad batch? I have godspeeds on my personal dd car and sitting at 40k miles still going strong

[@DiyFg2]

@@YangLimitz or could just be bad roads here in toronto. Lol. But godspeed sent me a replacement strut anyway.

[@jcam5567]

@@DiyFg2 Im in toronto too. my Teins just went after 35,000 kms..

[@DiyFg2]

@@jcam5567 it happens when u cheap out on coils thats why im getting a nice set of bc to replace my Godspeed ones

[@DiyFg2]

@@jcam5567 but toronto roads are just horrible horrible roads lol

[@feliiiik]

How does it drive

[@YangLimitz]

Drives and feels pretty dam good to me tbh

[@bluedream4973]

is it bouncy? or it rides close to stock?

[@YangLimitz]

@@bluedream4973 Tbh it rides like stock imo, they also come with adjustable dampening from harsh to soft

[@Reupinaf]

Hey bro is there anywhere we can connect vis phone number, Instagram or something? I finally completed my rears after I did the front coilovers maybe 2 weeks prior. I made a mistake somewhere in the rear passenger side there’s clunking. The struct pokes out more from the right than the left when u look at it from the trunk…. Message me asap!

[@kil-0976]

dfq get that thing to a mechanic lmao

[@logane779]

Godspeed is actually worse than Wish, please don’t use these to anyone watching

[@YangLimitz]

Had them on my personal car for 6 yrs still drives like a beast 🤷‍♂️

[@jayy1kalways]

@@YangLimitz how they holding up now brother? Thinking on getting me a pair for now

[@YangLimitz]

@@jayy1kalways They ride fine no issues at all

[@KaparoII]

Have mine for 4 years